Model 657 Super Cube position sensor is for severe environments. The 5/8-inch(3) sensor is available with standard resistance values ranging from 50(omega) to 25 k(omega) and up to 1-million shaft revolutions. Depending on the application, sensors can be provided with or without mechanical stops and with electrical travel to 320 degrees. Options include special shafts and bushings, custom wire harnesses in lieu of wire terminals, special ink systems, and high-temperature versions. Model 657 features a multi-array, conductive-plastic screen process, and laser trimming to confirm a 2% output signal.
Researchers at Lawrence Livermore National Laboratory have published two physics-based models for the selective laser melting (SLM) metals additive manufacturing process, so engineers can understand how it works at the powder and scales, and develop better parts with less trial and error.
The Internet happened.” Those three words spoken yesterday by Marc Ostertag, North America president of B&R Automation at Pacific Design & Manufacturing, now taking place in Anaheim through Feb. 11, continues to bring ever-lasting changes to our ways of life and will undoubtedly transform manufacturing.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.