ISODAMP C-1002 thermoplastic damping and isolation material provides control of noise, vibration, shock, and motion in a wide range of applications from precision equipment to off-road vehicles. The material is lightweight and flexible, and resistant to environmental degradation. It is also reported to have good flame resistance and anti-skid properties. Available in sheets, rolls, custom die-cut parts, and standard and custom injection-molded parts, its optimal temperature range is 55 to 105F.
E-A-R Specialty Composites, 7911 Zionsville Rd., Indianapolis, IN 46268; FAX (317) 692-3111; www.earsc.com.
MAGNADIZE®coatings are formulated to improve corrosion resistance, hardness, and lubricity of magnesium and magnesium alloys. They are used in a wide variety of commercial applications, including sliding vanes in rotary compressors, air-operated tools, and turbo-prop gear splines and housings. The product line offers coating thicknesses from 0.0003 to 0.002 inches, and provides varying degrees of wear and corrosion resistance, lubricity, and friction requirements for specific applications and alloys.
General Magnaplate, 1331 US Route 1, Linden, NJ 07036; FAX 908-862-6110; www.magnaplate.com.
This sensor is useful in assessing compression magnitude and distribution between any two mating or impacting surfaces with, according to the company, much greater resolution than standard indicating films. Applications exist for both manufacturing process control and machine/component inspection calibration. When placed between interfacial surfaces, the film permanently changes color to reveal measurements of dispersion and degrees of pressure.
Sensor Products Inc., 188 Route 10 Ste. 307, East Hanover, NJ 07936-2108; FAX (973) 884-1699; www.sensorprod.com.
This company reports to have developed a new process for printing on silicone without the use of Clearcoat. According to independent testing, silicone keypads printed with the new process were able to withstand over one million actuations without showing significant wear. Specially designed for printing onto concave and convex surfaces as well as flat, the process can reduce the need for offshore printing and reduces lead times.
The Motson Co., 1717 Bethlehem Pike, Flourtown, PA 19031; FAX (215) 233-5014; www.motson.com.
Project 7000®15Cr-5Ni stainless has been developed to provide superior machinability while meeting all requirements of Aerospace Material Specification (AMS) 5659, covering bars, wire, forgings, rings, and extrusions. The new alloy is available as a "drop-in" replacement for conventional 15Cr-5Ni stainless in applications where improved machining productivity is desired. The alloy is vacuum melted and chemically balanced for improved machinability.
Carpenter Technology, Box 14662, Reading, PA 19612-4662; FAX (610) 208-2776; www.cartech.com.
Rescor™ 770 Liquid Silicone Carbide is a castable ceramic, thermally conductive material that has an easy-to-use "in house" process. It can be mixed and poured into any non-absorbent mold. It hardens overnight to produce high strength, corrosion resistant parts, for use to 2,700F. Some applications include: making molds used for liquid metal castings and equipment, fabrication of prototype crucibles, nozzles, brazing dies, fixtures, parts, molds, burners, and supports.
Contronics Corp., 3379 Shore Parkway Brooklyn, NY 11235; FAX (718) 646-3028; www.cotronics.com.
Alumina in foam form allows engineers to combine the high thermal conductivity, low thermal expansion, and good wear resistance characteristic of the ceramic with the favorable structural attributes of foam. The foam is a low-density, permeable structure of cells and continuous ligaments offering a high surface area-to-volume ratio, as well as a high strength-to-weight ratios. Applications include use as catalyst substrates, filters, and structural material.
Goodfellow Corp., 800 Lancaster Ave., Berwyn, PA 19312; FAX (800) 283-2020; www.goodfellow.com.
These no-stretch steel belts now come with a choice of natural, synthetic rubber, urethane, or neoprene backings that can be machined or ground for use in specific applications, such as small component assembly, packaging, processing, and conveying. Backings can also be custom-cut or perforated to form detailed tooling nests, or to allow airflow for vacuum drive applications. According to the manufacturer, these belts run without lubrication of any kind, offer unlimited travel lengths, and are available with a variety of alloys.
Belt Technologies, 11 Bowles Rd., Box 468, Agawam, MA 01001-0468; FAX (413) 789-2786; www.belttechnologies.com.
Custom glass products include apparatus, tubing, rods, connectors, adapters, coated glass, and more. The company's customers include researchers, chemical processors, OEM's, and various specialty companies. Custom glass apparatus are available in single or multiple quantities, and metallic coatings are available.
Pope Scientific Inc., 351 North Dekora Woods Blvd. Box 18, Saukville, WI 53080; FAX (262) 268-9400; www.popeinc.com.