The PAT2S reel-fed automatic cable-tie installation system is for use on bundles up to 2 inches in diameter and uses reels of 2,500 ties to install PLT2S-VMR continuously molded cable ties with a minimum loop tensile strength of 50 lbs. By squeezing the trigger, the tool applies, tensions, and cuts off the tie in approximately one second. Ties are UL-recognized and meet MIL Standard MS3367-1. Tension is adjustable to provide optimum resistance to lateral bundle movement.
Panduit Corp., 17301 Ridgeland Ave., Tinley Park, IL 60477, FAX (708) 532-1811.
Researchers have been working on a number of alternative chemistries to lithium-ion for next-gen batteries, silicon-air among them. However, while the technology has been viewed as promising and cost-effective, to date researchers haven’t managed to develop a battery of this chemistry with a viable running time -- until now.
Norway-based additive manufacturing company Norsk Titanium is building what it says is the first industrial-scale 3D printing plant in the world for making aerospace-grade metal components. The New York state plant will produce 400 metric tons each year of aerospace-grade, structural titanium parts.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies.
You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived.
So if you can't attend live, attend at your convenience.