Fort Worth, TX —Lockheed Martin has successfully tested a fastenerless aircraft engine inlet duct system. The Joint Strike Fighter (JSF) team completed pressure testing of a minimal fastener inlet duct system that offers several cost and operational advantages.
The design incorporates a combination of composite material and process technologies for fabrication of the one-piece duct segment. The key to the success of the design was primarily due to advances in fiber reinforced preform technology for resin transfer molding (RTM). To achieve the goal of 100% fiber placement, a 3D wire-mesh graphite mandrel was used. Additionally, the use of integral attach flanges reduced the number of through-the-duct fasteners by 80%. Elimination of fastener penetrations through the inlet creates a smooth inner surface that produces better aerodynamic performance for air feeding the engine. Reducing the number of fasteners also eliminates corrosion and fuel-leak repair maintenance. "Compared to inlet ducts in today's operational aircraft, we estimate the new duct can be produced in half the time span and at two-thirds the cost," says Frank J. Cappuccio, vice president and program manager of the Lockheed Martin JSF.
The recent step towards validating the use of integral composite attach flanges was achieved through pressure test qualification. During testing, the duct resisted failure at 120-140 psi (twice the ultimate design load), approaching the limits of the test fixture. Visual inspection confirmed no visible evidence of failure after completing the test. "Not only did this duct test article contain all the features we expect to see in production, but these details were fabricated using production processes and tooling," notes Bill Coleman, Inlet Integration Demonstration team lead.
Flight evaluation of the JSF demonstrator aircraft is scheduled to take place this year, with government selection of a single contractor for the Engineering and Manufacturing Development phase set for 2001.
For 3D printing to make the jump from rapid prototyping to manufacturing, engineers will need to find easier ways to move products from their CAD screens to their printers.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
