Static dissipative hot gloves
Designed for operator handling of hot objects up to 200F, the polyester glove is lined with Nomex® and offers user comfort and non-allergenic properties, according to the company. Resistance to ground is less than 10 (to the 7th) and a 4 mm snap allows the gloves to be grounded to smock sleeves or with a wrist strap ground cord. The Hot Gloves are sold by the pair and are available in small, medium, and large.
Desco Charleswater, 3651 Walnut Ave., Chino, CA 91710; FAX (909) 627-7449; www.desco.com.
The new Model LS1 Data Loggerstor reportedly retrieves and stores data from as many as 31 data loggers. The unit lets the user store and transfer to a PC more than a quarter million temperature, humidity, and dew-point readings, print them to any parallel printer, or view them on site using the instrument’s alphanumeric display. The LS1 is battery powered and provides a convenient way for technicians to take and inspect stored data from environmental chambers, coolers, food storage areas and green houses, while leaving the data loggers in the field to continue operating.
Dwyer Instruments, 102 Indiana Hwy. 212, Box 373, Michigan City, IN 46361-0373; FAX (219) 872-9057; www.dwyer-inst.com.
This self contained unit operates at 10-35V dc, and has a switchable output from PNP/NPN, Normally Open/Normally Closed. This disc sensor has an adjustable sensing range from 2-25 mm, can be flush mounted, and is IP67 rated. Available wiring options are with an M8 or M12 quick disconnect or the standard 2-meter cable.
Sie Sensors Inc., Box 351899, Toledo, OH 43653.
The modular Micro Stage Multi-Axis System is class 10 clean room certified and, according to the company, is suitable for a myriad of multi-axis positioning equipment applications, such as fluid dispensing systems, blood analyzers, specimen sampling, and medical diagnostic apparatus. These low mass systems are available in a variety of stroke lengths, sizes, and lead screw arrangements to accommodate a wide variety of speeds, orientations, and load capacities.
Thomson Industries, 2 Channel Dr., Port Washington, NY 11050; FAX (516) 944-1892; www. thomson.com.
VALUE-PACK motion control packages consisting of a brushless servomotor and matching drive amplifier are offered in two fast accelerating motor types with peak torques of 307 to 1,200 oz-in, respectively, and rated speed of 6,000 RPM. Model 7427 ac servoamplifier provides up to 2.5 hp motor drive power and the amplifier operates from 32 to 264V RMS ac.
Copley Controls, 410 University Ave., Westwood, MA 02090; FAX (781) 329-4055; www. copleycontrols.com.
CFD, FEA pre-processing software
Gridgen V 13.3 adds automatic geometry and a wider variety of grid elements to previous versions reducing time normally spent removing gaps and overlaps in CAD models. Also, prism and pyramid grid elements are extruded from a triangular surface grid to provide fine resolution of flow gradients.
Pointwise Inc., Box 210698, Bedford, TX 76095-7698; FAX (817) 377-2799; www.pointwise.com.
Mobile ORII G-50
The mobile G-50 pick and place robot can be easily moved between presses to fully automate sheet metal stamping operations. It is mounted on wheels and can be rolled across the shop floor or carried by lift truck from press to press. Two quick release, single action toggle clamps rigidly secure the unit to the front of the press iN seconds, making short batch runs more cost effective. The G-50 can handle blanks weighing up to 3.3 lb and measuring up to 8 x 12 inches.
ORII of America, 1895 Airport Exchange Blvd., Building A Suite 230, Erlanger, KY 41018; FAX (606) 746-3319; www.oriiusa.com.
Stainless steel couplings
This new line of corrosion-proof, stainless steel couplings are designed for applications from servo-quality automated operations to simply tightening bottle caps on a packaging line. They include: servo-quality, backlash-free safety couplings, metal bellows couplings, servo-insert couplings, keyless clamping shrink discs, and magnetic couplings.
Rimtec Corp., 825 N. Cass Ave., Westmont, IL 60559; FAX (630) 325-1404; www.rimteccorporation.com.
The CertiCure™ vertical curing system was designed to cure and cool dispensed adhesive and sealant materials in high-volume production. It features reductions in floor space and energy consumption compared to conventional horizontal ovens, the manufacturer says.
Robotics Inc., 2421 Route 9, Ballston Spa, NY 12020; FAX (518) 899-4230; www.roboticsinc.com.
The Model 800 dispenser uses controlled air pressure instead of squeeze bottles or hypodermic syringes to control the flow rate for adhesives, lubricants, and other fluids. Its disposable barrel has a precision tip, and a piston that automatically wipes the barrel clean as fluid is dispensed. The dispenser is operated with an electronic foot pedal.
EFD, 977 Waterman Ave., East Providence, RI 02914; FAX (401) 431-0237.
New E-12 Series solenoid operated cartridge valves operate at flow rates up to 20 gpm and meet or exceed all IP67 standards for weather resistance and reliability under demanding conditions. The new coil design features a rugged external metal shell that houses a seamless, completely encapsulated coil winding. External seals, which are a common failure point for conventional coils, are eliminated.
HydraForce Inc., 500 Barclay Blvd., Lincolnshire, IL 60069; FAX (847) 793-0086.
Slow start valves
The Slow Start Valve is designed with gradual pressure increase to reduce wear and potential damage to valve components. Configured to mount on the power valve, Slow Start Valves prevent shock to the pneumatic system by permitting gradual pressure increases. A restrictor and an adjustable needle valve control initial flow through the valve. When 2/3 of the system pressure is achieved, an internal spring compresses, allowing immediate increase to full system pressure. After the system is pressurized, the cylinders return to the position they were in before the system air was vented.
Parker Hannifin - Brass Products Div., Box 215, Ostego, MI 490781472; FAX (616) 694-4614; www.parker.com.
Water-cooled air conditioners
A line of water-cooled air conditioners are designed
for cooling enclosed electronics where ambient temperatures exceed 125F. Because
the air conditioners use water to cool the condenser coil and are not dependent
upon ambient air temperature, they operate effectively in high temperature
environments. If a recirculated water source exists within the facility, the
water cooled air conditioners are a viable cooling alternative.
McLean Midwest, 11611 Business Park Blvd. N., Champlin,
MN 55316; FAX (612) 576-3200.
Low range shock absorber
A new series of adjustable shock absorbers are uniquely
designed for low velocity conditions. The LROEM Series is able to control heavy
loads while providing adjustment for varying conditions at lower impact
velocities. Broad adjustment setting capacity at low velocities enables
customers to apply the shock absorbers in applications where velocities are as
low as 3 inches/sec.
Enidine Inc., 7 Centre St., Orchard
Park, NY 14127; FAX (716) 662-1909.
The R9 Series is part of the REGENAIR regenerative blower
line. It produces pressure up to 125 inches of water (311 mbar, and vacuum to
115 inches of water with free air flow of 680 cfm. It’s equipped with a UL and
CSA-approved three-phase TEFC motor with permanently sealed ball bearings,
IP54-rated enclosure and Class F insulation. A CE compliant model with BSP pipe
ports is available.
Gast Manufacturing, Box 97, Benton Harbor, MI 49023; FAX
Digital cylinder control
The new DPQ Digital Controller is designed for hydraulic
injection cylinders with analog feedback. Advanced control algorithms in the DPQ
allow fast, accurate system response and deliver a more repeatable process than
was previously possible. The DPQ includes: user selectable internal or external
injection profile control, easy set-up, and the application flexibility to use
with most injection molding machines. Closed loop injection velocity and
pressure profiles have completely bumpless transitions. Hydraulic shock is
eliminated in all operating conditions. Transfer from velocity to pressure
control may be triggered by either injection cylinder position, pressure, or
mold cavity pressure. The microprocessor-based platform includes all parameters
necessary for the most demanding injection molding applications.
Mannesman Rexroth Corp., 2315 City Line Rd., Bethlehem,
The 2600 flow switch monitors pipeline flow in pipes from
1/2 to 8 inches in diameter. This all-plastic switch is corrosion resistant. It
easily installs into pipe systems using T fittings or pipe saddles. The switch’s
rotor shaft and bearings are ceramic. The 2600 has a built-in LED display for
visual flow indication.
Hayward Industrial Products, 900 Fairmount Ave.,
Elizabeth, NJ 07207; FAX (908) 351-7893; www.haywardindustrial.com.
The Imperial SAF™ bearing is designed for ease of
installation and removal, without compromising sealing. An adapter mount system
reduces installation time to 15 minutes, instead of the usual two hours, with a
one-nut locking technique, and no need for feeler gauge readings. The bearing is
a split-cap pillow block, available from 1 7/16 to 4 15/16 inch bore sizes.
Rockwell Automation, 6040 Ponders Court, Greenville, SC
29615; FAX (864) 281-2433; www.reliance.com.
Duralon® self-aligning spherical composite bearings are
designed for use in hostile and wet environments. The bearings feature a woven
Teflon® fabric liner backed by a rugged casing of filament-wound fiberglass and
epoxy resin. Corrosion resistance makes them appropriate for applications in
food and beverage processing, packaging machinery, construction machinery, and
other immersed mechanisms.
Rexnord Corp., 2324 Curtiss St., Downers Grove, IL 60515;
FAX (630) 969-8752.
The series 4 rotary drive is a “single-sided” unit used in
tight-tolerance applications, such as 5-axis plastic trimming, wood and
composite pattern making, and aluminum machining. Its package allows spindle
travels of up to 6270° in the B-axis, and 6183° in the C-axis. The drive obtains
rapid traverse speeds up to 25 rpm in both axes. Available in a 10 hp ISO30
taper spindle, a 12 hp ISO40 taper spindle, and a 7 and 10 hp double- ended
Motionmaster Inc., 450 W. California Ave., Vista, CA
92083; FAX (760) 639-1413; www.motionmaster.com.
The Jaw In-Shear coupling series has elastomeric “spiders”
that fully separate the driving and driven hubs, giving the traditional
compression-type jaw coupling a torque-transmission alternative, and allowing
the coupling to act as a torque-overload fuse. The wrap-around Urethane spider
is radially removeable without de-mounting the hubs, and is held in place by a
cast stainless steel retaining ring.
Lovejoy, 2655 Wisconsin Ave., Downers Grove, IL 60515;
FAX (630) 852-2120; www.lovejoy-inc.com.
The 3540 series drive (PDO3540) and drive/indexer (Si5580)
systems are designed around a 3.5A, 40V, CE- and TUV-compliant, all-digital
microstepping drive capable of delivering 122W of useable power. Microstepping
resolution is set via software or dip switch from 200 to 50,800 step/rev at
motor speeds up to 50 rps.
Applied Motion Products, 404 Westridge Dr., Watsonville,
CA 95076; FAX (408) 761-6544; www.applied-motion.com.
The TorqueMaster® BNL 2300 series brushless motor offers
torque ratings up to 140 oz-inch and speeds and torque stability up to 10,000
rpm, while accommodating dc bus voltages up to 325V. They are designed for
applications in factory automation, packaging, robotics, semiconductors, and
Cleveland Motion Controls, 829A Middlesex Tpke.,
Billerica, MA 01821; FAX (888) 295-5550; www.torquesystems.com.
These autoclavable brushless motors, based on System
Faulhaber® ironless rotor technology, combine no cogging, high-acceleration
dynamics with rare-earth magnet systems. They have been tested at temperatures
of 134C 62C, with a water vapor pressure of 2.1 bar, and can operate in 100%
relative humidity for 20-min cycles (including 3 min of live steam) for a
minimum of 100 cycles.
MicroMo Electronics, 14881 Evergreen Ave., Clearwater, FL
33762-3008; FAX (727) 573 5918; www.micromo.com.
This lightweight rotary servo actuator is designed to
provide high-output torque under extreme endurance conditions, such as
positioning the control surfaces of a reconnaissance unmanned air vehicle. Model
808-01 features a four-brush permanent-magnet dc motor controlled by a pulse
width modulated amplifier with hybrid power output stage.
Litton Systems, 1213 N. Main St., Blacksburg, VA 24060;
FAX (540) 953-1841; www.litton-ps.com.
BE series brushless servo motors produce 25% more torque
than equivalent-size motors, at cost savings up to 20%, the manufacturer says.
Available in sizes 23 and 34, they can provide up to 42 inch-lb continuous
torque. The motors gain extra torque from an increased number of magnetic poles
on the rotor, with eight instead of the traditional four.
Parker Hannifin – Compumotor, 5500 Business Park Dr.,
Rohnert Park, CA 94928; FAX (707) 584-3715; www.compumotor.com.
The EC series of brushless pancake motors are electrically
commutated, enabling longer life by avoiding extra parts to wear out. With the
coils outside the rotor, it achieves good heat dissipation and high overload
capacity. It weighs 32g, with a 32 mm diameter, and 8.9 mm length.
Maxon Precision Motors, 838 Mitten Rd., Burlingame, CA
94010; FAX (650) 697-2887; www.maxon.com.
The “built-in” RAM-MSD 2-speed gearbox is integrated in-line
between the water-cooled motor and the spindle inside of the machine tool’s RAM.
The unit extends the constant power speed range of the motor, providing high
output speeds up to 8,000 rpm for applications such as finishing aluminum, and
high torque at low speeds for hogging out steel or cast iron. Standard ratios
are 1:1, and reductions from 2.5 to 5:1.
Andantex USA, 1705 Valley Rd., Wanamassa, NJ 07712; FAX
(732) 493-2949; www.andantex.com.
Permbond® 4C10 cyanoacrylate is designed for high-speed
production of medical devices, including bonding, sealing, and fixturing parts
and substrates. Within 5 to 20 sec, it will bond substrates including brass,
steel, plaster, stone, aluminum, ABS, phenolic, polyesters, SBR, PVC, and many
other plastics. At 77F, the colorless, transparent liquid has a viscosity of 40
Permabond, 480 South Dean St., Englewood, NJ 07631-6849;
FAX (201) 567-3747; www.permabond.com.
Components with decorative finished surfaces demand flawless
conveyor handling. And these urethane-covered rollers can provide it, reducing
surface scratching, denting, galling, and chipping for items such as heavyweight
architectural components, consumer product equipment, and furniture.
Nolu Plastics, 900 C Tyrens Rd., Aston, PA 19014; FAX
ST-3® thread sealant is applied in a 360° pattern to the
inside of a fastener, such as the internal threads and the bearing face of large
diameter nuts used in automotive differentials. It can reduce clamp force
scatter, and provide a seal against fluid leakage. It will work with straight or
tapered threads, is dry to the touch, and seals instantly.
ND Industries, 1000 North Crooks Rd., Clawson, MI 48017;
FAX (248) 288-0022.
These ultraflat sapphire wafers are suited for use as base
plates for mounting substrates in semiconductor manufacturing devices. They
feature flatness to 0.5 fringes of HeNe and parallelism from 20 to 1 sec with 5
1.2 microns piece-to-piece uniformity. Impervious to caustic etching agents,
they are available in 50 to 82 mm diameter sizes, with thicknesses from 0.5 to 3
Meller Optics Inc., 120 Corliss St., Box 6001,
Providence, RI 02940; FAX (401) 331-0519.
This new C12 coating is a nickel-copper fabric that
eliminates the standard flaking and plating of other fabrics. It consists of a
layer of nickel on top of a layer of copper, both of which cover a nylon woven
fabric, providing a durable gasket with galvanic compatibility with a range of
materials including yellow and clear chromate, aluminum, steel, and zinc. It has
shielding effectiveness of >105 dB over the frequency range of 20 to 2,000
Schlegel Systems Inc., 1555 Jefferson Rd., Box 23197,
Rochester, NY 14692-3197; FAX (716) 427-7216; www.schlegel.com.
“Hygro-Wick” is a fiberglass insulation that prevents
condensation on piping systems used below ambient temperature. Insulation
failure is inevitable for most chilled water piping, because of moisture damage.
But Hygro-Wick uses a super-absorbent hydro-phillic wicking cloth at its core,
to move moisture to the outside of the system, where it evaporates.
Knauf Fiber Glass GmbH, One Knauf Dr., Shelbyville, IN
46176; FAX (317) 398-3675; www.knauffiberglass.com.
National Design Engineering Show Preview
Coiled tubing and hose
This custom coiled tubing has applications in appliances,
robotics, packaging, food and beverage, laboratories, chemical, medical and
pharmaceutical, and maintenance and repair. And the tubing’s ability to bend,
twist, and stretch makes it useful for air supply and fluid transfer. Customers
can specify material, color, outer coil diameter, performance re- quirements,
and coil length.
New Age Industries
2300 Maryland Rd.
Willow Grove, PA
FAX (215) 657-6594
Inverter duty gearmotor
The new series of 1/4 hp inverter duty gearmotors have
extended life expectancy in continuous duty applications like pumps, conveyors
and machine tools. These variable-speed, constant-torque, ac motors perform as
well as permanent-magnet dc motors, the company claims. But they last longer,
since they have no wearable components, and their advanced polymer insulation
outlasts copper wire systems.
Bison Gear & Engineering
3850 Ohio Ave.
St. Charles, IL 60174
3-way fieldbus connector
The BusQuick™ T-coupler is a universal connection device
that speeds installation of all popular Fieldbus systems and applications
according to IEC 61158-2. Ideal for three-way junctions, it uses an insulation
displacement technology which eliminates the need to strip the wires off the bus
30 Hook Mountain Rd.
Pine Brook, NJ
FAX (973) 830-1470
Caps and plugs
The caps and plugs protect parts from moisture, dust, and
other unwanted substances during packaging and shipping operations. Square and
rectangular caps, pull tabs, HP Series plugs, and tapered caps and plugs are
offered. The products are available in a variety of PVC materials including
standard vinyl, high temperature, non-staining for copper tubing, anti-static,
textured, FDA approved, and UL qualifiable.
Rochester, NY 48307
FAX (248) 651-4495
eDrawings is a new compressed electronic drawing file that
enables users to create, view, send, and receive mechanical drawings via email.
Each file contains a self-contained viewer, so recipients can start using the
drawings immediately. It is available for existing users of SolidWorks, AutoCAD,
and any CAD system outputting a DXF or DWG file.
300 Baker Ave.
Concord, MA 01742
The new HMIControl is an all-in-one device that integrates
an operator interface, a PLC, and a local I/O into one package. Designed to take
up minimal space, it is contained in a depth of less than 4 inches. The
manufacturer also offers its next generation UniOP touchscreen operator
interfaces, with various display sizes. And it offers the ELIN series of
industrial computers that support Microsoft Win NT Embedded and Win CE OS’s.
3420 Fairlane Farms Rd.
Wellington, FL 33414
Single board computer
The SBC-PII is a single board computer based on the socket
370 Celeron processor. With speeds up to 500 MHz and complemented by 100-MHz
front-side bus, it is designed to have the processing horsepower necessary for
graphics and number-crunching operations. It has advanced features such as a
video controller, memory, and expansion options.
7640 Pelham Rd.
FAX (864) 675-0106
The manufacturer uses a reaction molding
process to mold Bayer XGT 100 elastomeric material into thruster blades, a motor
ring, and outlet venturis. The blades contain 15% 1/16-in short glass fibers to
increase tensile strength. The motor ring uses the Bayer material to encapsulate
the neodynium magnetic motor. Together, they form components for a submarine
used for servicing undersea oil rigs at 3,000m depths.
433 Clyde Ave.
Mountain View, CA
FAX (650) 964-3407
Thermoplastic bearing assemblies
The manufacturer built a set of three thermoplastic
bearing assemblies for application in a CCTV security camera. The first bearing
is a 120 mm diameter angular contact bearing with clips on the outer race, and a
180-tooth gear in the inner race, to drive the panning motion. The second is a
hemispherical bearing assembly with 176 3 0.5 mod gear teeth which controls the
camera’s tilt motion. It contains a coil of ribbon cable for the electronic
link, and connects the third bearing to the other half.
56 Leonard St., Unit 5
FAX (508) 698-8898
The GPD 305 is a compact ac drive providing volts/hertz
control in general purpose speed control applications such as fans, pumps,
conveyors, compressors, mixers, and material handling installations. Features
include 3-digit display, built-in potentiometer, 70 program parameters, nine
preset speeds, dc injection braking, critical frequency rejection, momentary
power loss override, speed search, and more. The GPD 305 is available from 1/8
to 5 hp at 230 and 460V ac.
16555 W. Ryerson Rd.
Rapid prototyping system
The FDM3000 rapid prototyping system has a build envelope
of 10 3 10 3 16 inches, and incorporates a new support removal system for use
with ABS modeling material called WaterWorks. It is based on Fused Deposition
Modeling technology, and allows hands-free production of concept models,
precision prototypes, tooling patterns, and masters. With WaterWorks, the model
is then immersed in a water-based solution, and the supports wash away.
14950 Martin Dr.
Eden Prairie, MN
FAX (612) 937-0070
Unigraphics version 16 is a new release of the CAD/CAM/CAE
software, featuring Predictive Engineering, a method of incorporating
engineering practices and product life cycle knowledge into the product
development environment. The technology includes Process Wizards and Process
Assistants, which encode product and process knowledge to improve design and
Unigraphics Solutions Inc.
13736 Riverport Dr.
Maryland Heights, MO 63043
The integral electronics in these brushless motors provide
all the advantages of brushless design with the simplicity of two-wire
connection. They are “drop-in” replacements for standard PM motors, and provide
many options for speed control, mounting configuration, construction materials,
magnets, etc. The motors are available in sizes 8 to 40 with current ratings
ranging from 0 to 20A, in 12 to 36V operation.
2560 Gen. Armistead Ave.
Norristown, PA 19403-5214
Wire harness design
The latest release of EMbassy is version
2.5, with improvements to its wire harness design software including different
colors for different diameters, the ability to call out the loom by itself and
show it on a nailboard drawing, put splices into the harness, and embed
dimensions into channels and wires. EMbassy version 2.5 combines electrical
connectivity with a 3D model to create an intelligent electro-mechanical design
276 Turnpike Rd.
FAX (508) 616-9362
The Model 2000 is a high-speed digital CR imager, packaged
in a self-contained unit so engineers can record high-speed images for video
playback at variable speeds, and as a data source for computerized motion
analysis. Users can record 24-bit color or eight-bit monochrome images at rates
up to 2,000 frames/sec. A 512 x 384 sensor captures high-resolution images.
Roper Scientific MASD
11633 Sorrento Valley Rd.
Diego, CA 92121-1097
FAX (858) 792-3179
The new ProAir™ filter fan packages feature quick
installation with snap-in mounting, and a slim profile of less than 0.25 inch
for the fans and exhaust grilles. They are an affordable way to protect enclosed
electronics from heat and dirt, and maintain even temperature distribution
within enclosures. They maintain an IP54 rating on the enclosures when the
filter gasket is in place.
Park Blvd. N.
Champlin, MN 55316
FAX (612) 576-3200
High-speed video systems
The Encore PCI high-speed video systems record the movement
of high-speed manufacturing equipment as it operates, so engineers can analyze
the movement and locate equipment problems by playing back the digital images in
slow motion. They are designed for expediting production line changeovers,
troubleshooting, preventive and predictive maintenance, and quality control.
2 Corp. Center
Melville, NY 11747
Flanged and machined bearings
These precision composite bearings are flanged and
machined to meet specialized applications. Flanges range from 1/2 inch to
20-inches deep and are composed of heavy-duty, non-corrosive material with
dielectric strengths. They are used to maintain the spacing of bearings in
lifts, and in applications in material handling, conveying, computer hardware,
and the valve, aircraft and marine industries.
103 Industrial Park Dr.
FAX (219) 586-7336
This new linear actuator with ball screw reduces friction
and extends motor life for driving ballscrews. The motor’s hollow shaft
accommodates a variety of leadscrews up to 3/8-inch diameter. And a threaded
front shaft extension and hub allow for ballscrew attachment to the rotating
hollow shaft. The size 23 single stack dc stepping motor measures 2.25 31.8
EAD Motors - Eastern Air Devices
One Progress Dr.
Dover, NH 03820-5450
Cam Runner™ idle rollers combine an internal design with an
optimized combination of composite material, to outperform conventional needle
bearings in continuous-duty tests, the manufacturer says. The composite tread
and bearing unit is sized for direct replacement of conventional cam followers,
including a threaded stainless steel stud.
5401 Hamilton Ave.
FAX (216) 361-1606
The new M3 lift-handle actuator and multipoint latching
system are designed for electronic enclosures, for easy operation, high
security, and consistent compression along the door edge. The latching system
drives multiple remote compression latches from a single actuation point, for as
many latches as needed to achieve consistent, 5-mm compression.
210 N. Brinton Lake Rd.
Concordville, PA 19331
Nylon stock shapes
These nylon billets and blanks, with custom-designed steel
cores, are designed for use in machining gears, rollers, pulleys, wheels, and
sprockets. The NylaSteel™ composite stock shapes combine the wear and
self-lubricating properties of nylon with the strength and hardness of steel.
NylaSteel components can be attached to a steel shaft the same way as a steel
gear, including press fit, bolt-circle, and/or key way.
DSM Engineering Plastics
2120 Fairmont Ave. , Box 14235
Reading, PA 19612
Motion control system
The MicroLYNX is a motion control system in a panel-mounted
assembly, integrating a bipolar stepper motor microstepping drive and a
programmable indexer with expandable I/O and multiple communication ports, all
running off a single power supply. Available in two power ranges: MicroLYNX4
runs at 12 to 48V dc with 3A RMS (4A peak) output, and the MicroLYNX7 runs at 24
to 75V dc with 5A RMS (7A peak) output.
Intelligent Motion Systems Inc.
370 N Main St.
Marlborough, CT 06447
Remote switching device
Instead of using an electric switch and cable, this
waterproof, shock-proof, explosion-proof switching device works with a
pushbutton air bellows that connects through flexible tubing to a pressure
switch in the equipment. The switch is available in configurations including
momentary, alternate action, and sequencing, up to 25A, 1 hp. The tube is not
affected by water, dirt, dust, or flammable gas.
1009 W. Boston Post Rd.
Mamaroneck, NY 10543
DesignPak works from within CAD to provide access to FEA
tools. DesignPak features a tetrahedral mesh engine designed for faster solid
FEA meshes, enhanced plate/shell modeling static stress analysis, and an HTML
Report Wizard. Engineers can use the same user interface and operations
regardless of the CAD system used or the analysis types needed.
150 Beta Dr.
FAX (412) 967-2781
The W.1000 series is a 3- x 4-mm chip with more than two
million gates, and a Teach-in button that automatically sets itself up for your
application, the manufacturer says. This self-setting is included in its OES II
ASIC, and is standard on the energetic proximity and fiber-optic sensing modes.
The photoelectric sensor uses a stress-free molded lens.
6900 W. 110th St.
FAX (612) 941-9287
The ELS-1100HTS is an ultra-compact, high-temperature,
electro-optic liquid level switch that can handle liquids up to 212F. It is made
from Isoplast® plastic for reliability in hot water or oil, and with a
low-profile body for on- or off-highway applications. Solid-state switching is
self-contained in the 1.5-inch switch. And once installed, the switch extends
less than 0.55 inch from the external tank wall.
1 Cowles Rd.
Plainville, CT 06062-1198
New valve connectors for the QUICKON connection system
feature a large reduction in wiring time, and demand no special tools for making
a connection, since the insulation does not need to be stripped to make the
connection. They are designed for PVC and PE insulated conductors (16 to 18
AWG). The Type A valve plug is three-position and is available in various
voltage and current options.
Harrisburg, PA 17111-0100
FAX (717) 944-1625
Step and servo motors
The Alpha Step, 2-phase, hybrid, geared step motor and
driver package uses a built-in feedback device that constantly monitors the
motor shaft to detect and correct for loss of synchronism. It runs open loop
under normal conditions and only runs in closed loop when a position deviation
of 1.8º or greater is seen. Motors are available with three types of gearheads:
tapered, planetary, and harmonic.
2510 W. 237th St. , Ste. 102
Torrance, CA 90505
The Belflex™ bellows couplings combine stainless-steel
bellows and aluminum hubs for high-performance motion control, with high torque
capabilities and high torsional rigidity in a zero-backlash, low-inertia
flexible coupling. It accommodates parallel and angular misalignment and axial
motion, for applications including encoders and servomotors.
Ruland Manufacturing Co.
380 Pleasant St.
Watertown, MA 02472
These autoclavable brushless motors are designed for
medical and harsh environments, and combine no-cogging, high-acceleration
dynamics with rare-earth magnets. They have been tested at sterilization
temperature of 134C 62C, with water vapor pressure of 30.5 psi. They can operate
in 100% relative humidity in 20-minute cycles, including 3 minutes of live
steam, for a minimum of 100 cycles.
14881 Evergreen Ave.
Clearwater, FL 33762-3008
In-line helical gear drives
Some of the company’s gear drive models include
double and triple reduction units, with standard NEMA C-Face flanged and direct
input non-flanged configurations. The 800 Series drives are available with
double reduction ratios of 1.5:1 through 70:1, and triple reduction ratios of
36:1 through 250:1. All 800 Series feature oversized ball bearings with reduced
straddle distance between bearings and steel output shafts. All drives can be
double sealed on both the high-speed and low-speed shafts for severe
14 Hayward St.
Quincy, MA 02171
FAX (617) 479-6238
Servo controller and
The RTC-3000 is an integrated,
miniaturized, free-standing, motion controller/ amplifier, measuring 3.68 2
1.815 2 0.35 inch. It will operate nearly any small brushed or brushless dc
servo, and uses 24V dc. It has inputs for the encoder, the motor, the hall
sensors, general purpose I/O, and additional encoder and step & direction
fields. As many as 120 of them can be combined on a single RS-485 network.
3050 Tasman Dr.
Santa Clara, CA
FAX (408) 748-8725
These gold-plated bellows contacts absorb shock and
vibration while maintaining a continuous connection. They are designed for
dynamic interconnect applications, and have low insertion forces, low insertion
losses, and extremely low dc resistance. The contacts have diameters from 0.037
to 0.245 inches O.D.
501 Little Falls Rd.
FAX (800) 785-0756
The XVL161 Series, 2-axis potentiometer joystick with a
spring-activated return-to-center feature, offers 625 deg. travel in a design
for handheld, single-finger, or thumb operated remote controllers. Typical
applications include consumer electronics, CCTV, studio/stage lighting,
robotics, light industrial control units, or other applications requiring
multiple control functions from a single finger-activated device.
5450 Meadowbrook Industrial Ct.
Rolling Meadows, IL 60008
Dc to dc converters
The LPD301 series includes a variety of standard full-brick
footprint dc to dc converters, measuring 4.5 2 2.4 inch and ranging from 50 to
200W. The converters operate at a fixed frequency of 375 kHz, and are available
with six different input voltages. Output voltages can be adjusted from 65 to
110 percent with an integral trim pin, and output ripple typically measures less
than one percent peak to peak.
Chatsworth, CA 91311
The Series D3 directional control valves include a 40 GPM
D05 size directional valve. These direct operated, 4-way valves are designed for
manifold mounting, and conform to NFPA’s D05 pattern. They are designed for use
in industrial and mobile hydraulic applications requiring high cycle rates and
high efficiency. They are available in four operator types, and in 22 different
spool styles. Valve flows up to 150 LPM (40 GPM) and pressure ratings up to 345
bar are available.
8940 Tyler Blvd.
The diaphragm pump “SM4,” for the handling of liquids, is a
linear drive pump and is capable of running dry up to 1000 hours. It can be used
as a metering device, by regulating the electrical input to the pump. It can
deliver from -250 to 500 mbar pressure with a discharge rate of 150 ml/min and
is available in both ac and dc voltages.
1419 Illinois Ave.
FAX (920) 451-4238
The line of Spelsberg industrial enclosures includes six
new non-metallic enclosure families and the first metallic series, constructed
of cast aluminum. They are designed for applications from light duty to heavy
industrial and marine environments, for the housing and protection of components
and devices, including IEC components, sensors, circuit breakers and DIN rail
mount terminal blocks.
35 Royal Rd.
FAX (908) 806-9490
The programmable field controller allows
the user to store and execute programs locally, and still communicate with a
network. Program execution continues, even if the fieldbus connection is lost.
The programming tool enables the downloading of simple logic control into each