These belts, part of the A 6B16-D Series, are built for machine tools, mowers, business machines, copiers and printers. They have double-sided tooth action and excellent flexibility. They wind between pulleys for shaft rotation synchronization, even with counterrotating shafts. In high-reduction drives, these belts take the place of multiple belts used for the same job, and work well in small spaces. They are made out of a Kevlar-reinforced polyurethane, and work in 0-180F temperatures, and can work intermittently in temperatures up to 248F. They come in 1/8, 3/16, ¼ and 3/8-inch widths, with special widths also available. They have 132-500 grooves on each belt, with a 10.56 to 40-inch pitch length range.
When you think of the DARPA Robotics Challenge, you may imagine complex humanoid contraptions made of metal and wires that move like a Terminator Series T-90. But what actually happened at the much-vaunted event was something just a bit different.
Traditional dev kits are based on a manufacturer’s microcontroller, radio module, or sensor device. The idea is to aid the design engineer in developing his or her own IoT prototype as quickly as possible. A not-so-traditional IoT development kit released by Bosch aims to simplify IoT prototyping even further.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.