Electronics

Controls

Fits standard panel openings

The LMR-series Mirror Rotate Control for automotive interiors includes a 4-axis joystick actuator, internal boot seal, control to 1 or 2 mirrors with up to 4 motors, and standard arrow graphics. The electronic control system operates at 1A, 12V and 0.5A, 24V ratings. The rotate control fits industry standard 44- x 22-mm panel openings, is compatible with Delphi/Packard #12045688, and uses sliding contacts with a circuit board. Carling Technologies, www.carlingtech.com Enter 588

Design support

Integrates with test automation

Design verification application support is available, integrating EDA tools and test instrumentation for connected activity. The company claims the combination saves development costs and improves productivity, helping communications companies get products to market faster. Designs are verified earlier in the process. The combined capabilities offer a consistent user interface across these products, the company says. Agilent Technologies, www.agilent.com Enter 589

Temperature sensors

Small probes, two wavebands

A two-color infrared temperature system uses fiber optic sensors designed for the DP1541 two-color monitor and cable assembly. Probes are small to fit in limited spaces and are unaffected by RFI and EMI noise, the company says. OS1542 and OS1543 sensors operate at two wavebands and use an energy ratio to calculate temperatures of 250 to 1,500C. OS1542 has a silicon detector and OS1543 has a lead sulfide detector, the latter not for use where hot steam or gas is present. OMEGA Engineering, www.omega.com Enter 590

Multiple connectors

High-temp insulation included

A small multiple connector line for backplane rear I/O includes 68- and 80-position high-density units. Designed for flexible board-to-board stack heights for sub-assemblies, the connectors are available as vertical male and female and right-angle male. Termination options include SMT, pressfit, and IDC. Connectors are suited for PCB applications where signals can be split. ERNI Electronics, www.ernicomponents.com Enter 591

Development board

Ready-to-run, peripheral devices

Fully stackable for different layers in hard, real-time systems, the TTP-Powerlink board system supports many interfaces and conforms to time-triggered architecture and TTP. The system has a NEC TINA or AS8202 communication controller and a NEC V850E 32-bit microprocessor. Units are typically used in a cluster, which runs TTP prototyping and development projects. Applications include automotive software development for integrated vehicle control systems and driver assistance systems. TTTech Computertechnik AG; www.tttech.com Enter 592

Digital converters

Single or quad-channel

The industry's first 16-bit, digital-to-analog converters are available with I² C interface, the company reports. Converters are available in single-channel (DAC8571) and quad-channel (DAC8574), and both operate on a 2.7 to 5.5V power supply, consuming 170 and 950 µA of current respectively. Small and low-power driven, the device is designed for portable applications like industrial process control, instrumentation, closed-loop monitoring and data acquisition. Texas Instruments Inc., www.ti.com Enter 593

Auxiliary switch

Continuous rating of 20A at 600V

A unidirectional 90° indexing auxiliary switch offers snap action and up to 24 poles. Series 102 is modified to allow lever arm activation and quick break action of about 10 milliseconds for dc and ac switching. Units may be used in applications like welding, telephone equipment, overhead magnets, and train warning lights. Features include enclosed decks, double-wiping contacts in enclosed, phenolic insulating disks, and an optional sweep contact. Electroswitch, www.electroswitch.com Enter 594

Relay terminal blocks

Compact, 6-mm wide housing

Series 859 rail-mounted switching relay terminal blocks and octocoupler blocks feature 5, 24, 48, 60, 115 and 170V dc input voltages. The wide voltage range allows interface with old or unique circuitry in industrial control systems and PLCs. The 6-mm wide housing saves space while five connection points and multiple commoning options offer variety. Units accept 22-14 AWG and feature cage clamp spring pressure terminations. WAGO Corp., www.wago.com Enter 595

Serial ATA

Replaces larger flat ribbons

The Serial ATA is a miniature version of the parallel ATA but has double the data transfer capability, the company reports. Units allow the design of smaller devices with improved airflow. With a transfer speed of 150 Mbytes/sec, the Serial ATA replaces larger flat ribbons found on hard drives, ZIP, CD/CDRW, and other storage devices. The product reportedly eliminates the need for jumpers and settings, and allows the use of 12, 3, and 3.3V power. Power Dynamics Inc., www.powerdynamics.com Enter 596

Cylinder position sensor

For heavy-duty machinery

The MH magnetostrictive hydraulic cylinder position sensor is designed for on- and off-road machinery where non-contact measurement is a must. Reportedly compact and rugged, the MH offers OEM and cylinder suppliers position feedback for the latest smart cylinders. Three-piece units include sensor, housing, and electronics designed for embedded applications. Pressure housings are available in diameters of 7 or 10 mm, at 4,300 or 5,000 psi static pressure rating. MTS Systems Corp, www.levelplus.com Enter 597

Assembly system

Modular, integrated in stages

The AutoAlign™ MODAL is an entry-level version of an automated assembly system, used for early process development, prototyping, and pilot production. The modular system performs alignment and metrology of fiber optic components, including planar waveguides, AWGs, and fiber collimators. Features include integrated stages, less than 0.01 dB repeatability, and Integra™ process control software. Newport Corporation, www.Newport.com Enter 598

Surge protection

For machine, motor controls

SURGELOGIC® TVSS surge protection devices are mounted in the company's SQUARE D POWER-ZONE® 4 Switchgear, designed for machine controls, motor controls, HVAC and material handling applications. With peak amperage protection to 480 kA, TVSS units protect in low and medium voltage distribution in hospitals, data centers, automotive, pharmaceutical, pulp and paper, and water treatment environments. Recommended for OEM integral products. Schneider Electric, www.schneiderelectric.com Enter 599

Super-thin LED

Light source in small space applications

Designed for backlighting keypads and other devices, the PY1114CK Super Thin Type SMT LED is 0.4 mm thick and available in yellow-green with a milky white lens. Luminous intensity is 5.6 mcd, forward voltage is typically 2.1V with an IF of 10 mA and operating temperature -40 to 85C. The LED is available packaged in tape and reel. Stanley Electric Sales of America, www.stanley-electric.com. Enter 600

Microcontroller

Extends normal battery life

Super low power technology is available in the H8/38004 series 8-bit microcontroller that operates as low as 1.8V and uses 200 mA at 1 MHz when CPU and peripherals are active. The 64-pin units are suited for applications like portable glucose meters and heart-rate monitors, allowing maximum time between recharges. Products can be supplied with digital-to-analog converters. Hitachi America, www.hitachi.com Enter 601

I/O amplifiers

Wide bandwidth, low quiescent current

A series of high-performance amplifiers has rail-to-rail inputs and outputs using low power to 2.7V. The AD8027 features high bandwidth, 100 V/µsec slew rate, selectable crossover and reportedly the lowest available distortion over the input range. Applications include filtering, A/D converter driving, level shifting, buffering, and battery-powered instrumentation. Available in SOT-33 and SOIC packages, AD8027 operates between -40 and +85C. Analog Deviceswww.analogdevices.com Enter 602

Current converter

Operates in parallel

The two-channel, full-scale output VC2100-HS voltage-to-current converter provides up to 200 mA with a 15 kHz response. Two channels can operate in parallel, and current is field- settable from ±10 to ±100 mA in 10 mA steps. Delta Computer Systems Inc.www.deltacompsys.com Enter 603

Heating elements

For confined applications

Custom designed security enclosure heaters are ideal for areas using outdoor cameras and ATM machines. Low-watt density heaters are required to maintain mechanical and electrical performance, the company says. Designed to fit in confined areas, the enclosure heaters may use both printed thick film and positive temperature coefficient heating technologies. PTF heaters can be flexed and fitted to irregular surfaces. Dekko Heating Technologies Inc.www.dekkoheat.com Enter 604