Six mm in diameter, a new electronically commutated dc motor with Hall
sensors is the smallest of its kind, according to its maker, Maxon Motor ag. The
2.8-gram motor turns at up to 100,000 rpm and has an assigned power rating of
1.2W. Nominal voltage is 9V dc, maximum continuous current is 500 mA, and
maximum continuous torque is 0.260 mNm. Maxon is developing a range of
6-mm-diameter planetary gearheads for applications requiring a higher torque at
a lower speed. Applications include: medical equipment, aeronautics, and
Maxon Motor ag, Brunigstrasse 220 P.O. Box 263, Sachsein CH-6072; www.maxonmotor.com.
LED display cube
RGB Sunlight-Visible LED Display Cubes render all colors of the displayable
spectrum, according to the manufacturer. The units employ dot-matrix lamping, in
which different-colored LEDs are arranged within a cell so that when illuminated
they appear to produce a single-color light. Each LED within this RGB array can
be addressed individually or collectively, allowing red, green, and blue light
to be precisely controlled in pro-portion and intensity. The RGB-1005-001 has 1
dot-matrix cell comprising 4 red, 2 green, and 2 blue LEDs. The RGB-1006-001 has
4 cells for a total of 8 red, 8 green, and 4 blue LEDs. Applications include:
display signs, status indicators, outdoor scoreboards, and billboards.
Ledtronics, 23105 Kasiwa Court, Torrance, CA 90505; FAX 310-534-1424; www.ledtronics.com.
A wear-resistant bevel gearing replaces the common worm or face worm gearing
in a new right-angle gearbox. Ratio range is from 6 to 60, torque is up to 90
Nm. Efficiency remains constant independent of the ratio, and is approximately
95% at rated load. The design is available as a geared motor in a compact design
or as a gearbox with mounting flange for IEC standard motors.
Lenze GmbH & Co KG, Postfach 101352, Hameln D-31763; FAX 310-534-1424; www.Lenze.com.
MiniSlides combine drive and guiding functions within a single unit and are
based on standard pneumatic cylinders. Designers can use them in large numbers
in small automatic assembly systems to carry grippers, rotary elements, power
screwdrivers, or clamping devices. The product series comprises three versions.
Model MSS is a rugged design suitable for pick-and-place applications involving
heavy elements. MST is a narrow model; MSN is a slimline version for long travel
requirements. The integrated linear and ball rail systems from Deutsche Star
provide stability and precision. MiniSlides are available with diameters of 8 to
25 mm and with different basic stroke lengths.
Rexroth Mecman GmbH, Bartweg 13, Hannover D-30453; FAX 310-534-1424.
The Millennium family of integrated controllers combines relays, switches,
counters, timers, sequencers, and a memory bank. The smallest model has 4 inputs
and 2 outputs, the middle model has 6 inputs and 4 outputs, and the largest has
12 inputs and 8 outputs. The two larger models are available in both ac and dc;
the dc models can accept both analog and digital inputs. Programming is via the
8 pushbuttons and visual display on the front panel, or by plugging a laptop or
PC into a socket and downloading programs. The Visual Logic programming software
runs in Windows NT and 95 in English and four other European languages.
Installation options are DIN rail and rear and flush panel mounting with an
adapter. Measurements are 99 mm high, 55 mm deep, and 72 or 125 mm wide.
Crouzet Ltd., Intec 3 Wade Rd., Basingstoke, Hants RG24 8NE; FAX
Extrusion sensors for the food industry are hermetically sealed to keep out
moisture, which could otherwise cause corrosion. All of the firm's extrusion
sensors in all pressure ranges are available in hermetically sealed versions,
called H types. Even without cables connected, the production equipment and the
sensors inside with open connectors can withstand water cleaning. The sensors
function without mercury or oil fillings, and are also available in versions in
which sensor and amplifier can mount separately.
Kistler Instrumente AG Winterthur, Eulachstrasse 22, Box 304 CH-8408
Winterthur; FAX 310-534-1424.
MFM spinner brushless dc motors act as heavy-duty spindles to support
asymmetrical loads typical of silicon wafers and glass masks. The bearing system
provides stability and vibration control. The motor housing is sealed, and a
non-contact baffle protects the bearings from contamination.
Bayside Motion Group, 27 Seaview Blvd., Port Washington, NY 11050; FAX (516)
The 4TNE106 114-hp, four-cylinder diesel engine is available in turbocharged
and naturally aspirated versions. A hydraulic pump drive is built-in the gear
case. The unit weighs 662 lb, and can be configured with radiators, air
cleaners, and instrument panels.
Yanmar Diesel America Corp., 951 Corporate Grove Dr., Buffalo Grove, IL
60089; FAX (847) 808-6968.
Carver clamps come in five designs: T-Slot, C-Style, Edge Grip, Buttress, and
Bar Style. T-Slot clamps provide quick height adjustment and positive holding,
while the C-Style clamps consist of two major parts: frame and movable jaw. Edge
Grip low-profile clamps apply horizontal and vertical clamping force against the
workpiece, and the Buttress clamps secure thin or low-profile workpieces. The
Bar Style clamps, made from high-strength steel are for use where a large
clamping capacity is required.
De-Sta-Co Industries, 2121 Cole St., Birmingham, MI 48009; FAX (248)
Compression-style push-to-close latch provides compression and vibration
resistance. Once the latch is engaged in the receptacle, turning the latch will
pull the latch and receptacle even more tightly together, applying compression
to the panel and frame and/or gasketing material. Ridges on the receptacle line
up with grooves on the latch to prevent the latch from vibrating loose.
Constructed of durable, corrosion-resistant plastics, the latch suits
applications in the agricultural, construction and industrial machinery,
packaging and automation equipment, and enclosure industries.
Southco, Midway House Staverton, Technology Park, Cheltenham Glos, England
Angle joints to DIN 71802 are available for automotive, agricultural,
construction, printing, and other applications. The series includes C8-M5 to
C19-M16 and CS8-M5 to CS19-M16 units. The angle joints come in a bare metal
finish or a galvanized finish and are also available in high-grade stainless
MBO Osswald GmbH, Steingasse 13, Kulshim-Steinbach, Germany D-97900; www.mbo-osswald.de.
Slam latch augments the company's range of hinges for aluminum and can secure
profiles of 30, 35, 40, 45, and 50 mm in width. The latch's catch snaps free of
the frame section with a gentle pull on the grip element. When the door is shut,
modest pressure causes the catch to engage. When closed, the latch withstands
tampering due to its compact design. The latch is available with cylinders keyed
alike or keyed different or without a locking cylinder. Finishes include
die-cast zinc in black or chrome plated.
DIRAK GmbH & Co KG, Koenigsfelder Str 1, Ennepetal, Germany 58256.
Semi-crystalline aliphatic polykeytones (PK) are applied in the automotive
industry, and noticed for high barrier properties, low gasoline permeability,
resistance to a broad range of fuels, transmission fluid, and high and
dimensional stability. Polymers provide the necessary resistance to fuels and
additives at the elevated temperatures required for use with direct injection
and common fuel rail technology.
Shell Chemical, Box 2463, Houston, TX 77252; FAX (713) 241-1606.
The iglidur NM 7-56 polymer plain bearing operates with predetermined low
loads at friction values of 0.12 when running dry. Abrasion values are
significantly reduced at surface pressures below 2 Mpa, and temperature range is
-40 to 80C. Other features include zero corrosion, low humidity absorption, and
constant noise level. Applications include printers and electrically operated
igus GmbH, Spicher Strasse 1a, Koln, Germany D-51147
Oroglas® VOD 100 acrylic resin is specially formulated for making
DVDs. According to the manufacturer, the material fulfills all technical,
economic, and industrial constraints at all DVD production stages: molding,
sputtering, and bonding. Features include lower viscosity than polycarbonate,
low birefringence, 92% light transmission, resistance to scratching, rigidity,
and dimensional stability.
Elf Atochem, 4, cours Michelet-La Defense 10 Cedex 42, Paris-La Defense,
Cronidur 30® is a rolling bearing steel from the family of
high-nitrogen steels. Hardness is 58 HRC, and the steel features very good
high-temperature strength, corrosion resistance, and insensitiveness to starved
lubrication, mixed-friction conditions, and pollution particles in the
Fag Oem Und Handel Ag, George-Schafer-str 30, Schweinfurt, Germany D-97419.
ToughMet copper-nickel-tin spinodal bronze alloys resist corrosion and
fatigue failure. They have high strength, natural anti-fouling and anti-galling
properties, good ductility, and a low coefficient of friction. The alloys can
also withstand ten times the loading of C96500 aluminum bronze, according to the
manufacturer, and so are good for applications requiring long bearing life. Rod,
bar, tube, and billet are available, as well as continuous casting in complex
Brush Wellman Ltd., Units 4 and 5, Ely Rd. Theale Commercial EstateTheale,
Reading, Berkshire, England RG7 4BQ; www.Brushwellman.com.
VACODUR 50TM soft magnetic alloy is based on the 50% cobalt-iron
alloys VACOFLUX® 48 and VACOFLUX 50. The alloy features superior
strength and ductility while retaining almost equally good magnetic properties.
This results in substantially higher rotational frequencies in rotors, says the
Vacuumschmelze GmbH, Postfach 22 53, Hanau, Germany D-63412; www.vacuumschmelze.de.
Kapton® insulation and polyimide adhesive combine to give
ThermofoilTM heaters a temperature rating of 25 to 50C higher than
previously possible with Kapton heaters and 15C higher than silicone rubber
heaters, according to the manufacturer. The new construction allows faster
warm-up and rapid response to changing heat loads. Applications include
semiconductor processing and test, avionics, and packaging equipment.
Minco Products, 7300 Commerce Lane, Minneapolis, MN 55432; FAX (612)
Included in the Parts In Minutes range of polyurethanes for rapid
prototyping, Ureol® 5238 and 5239 are UV-stable and non-UV-stable
transparent materials. Both versions can be pigmented with inks or
polyurethane-based coloring pastes while still retaining their transparency.
Both also resist temperatures up to 100C, offer a hardness of 80 shore D, and
have impact strength of 90 kJ/m(2).
Ciba Specialty Chemicals, Performance Polymers, Hinxton Rd., Duxford,
Cambridge, England CB2 4QA; FAX (612) 571-0927.
Car navigation system
Carin 522 car navigation system combines spoken directions with large,
easy-to-read pictograms to help drivers navigate turn-by-turn across town or
country. The system plots route information, considering detours or traffic
jams. A driver activates Carin 522 with an infrared remote control, and can use
the system to plot a route based on travel time, travel distance, major
highways, or side streets. Drivers can select their destination by using the
on-screen keyboard, the on-screen map and cursor, retrieving stored addresses,
or calling them up from the system's CD-ROM. A 5 @ 2 7/8-inch display has a 16:9
aspect ratio with hard switch controls for brightness, contrast, and volume.
Nine language options are available.
Vdo North America LLC, 188 Brooke Rd., Winchester, VA 22604; FAX (540)
TechChek® 830 process calibrator sources and reads a variety of electronic
process signals, and troubleshoots like a multimeter. Typical accuracy is
±0.025 of span +1 LSD. Optional modules add the ability to measure
pressure in 20 engineering units. TechChek measures a variety of dc voltage
ranges to 200V dc and sources to 10.25V dc, and can read ac volts up to 250V ac.
Altek Industries Corp., 35 Vantage Point Dr., Rochester, NY 14624; FAX (716)
Model 4380 Iso Verter® II process signal converter/isolator
protects electronic circuits by completely isolating the input and output
signals from each other and the ground. With bipolar input selection and zero
suppression, nearly any standard input/output combination is possible.
Dwyer Instruments Inc., Box 373, Michigan City, IN 46361; FAX (219) 872-9057.
Micro-EyeTM microprocessor-based monitor is available with a Voice
Alert feature. Micro-Eye monitors critical functions of internal combustion
engines, such as oil pressure and transmission and coolant temperature, using
input from existing discrete or analog sensors. If conditions develop that could
cause engine damage, Micro-Eye issues an audible warning, then shuts down the
Advanced Control Systems Inc., 7125 Windsor Lake Pkwy., Loves Park, IL 61111;
FAX (815) 877-8025.
Rick DeMeis on Electrical/Electronics
For comments on electrical/electronics, contact Rick at email@example.com
Right TouchTM multifunction keyboard, model RT-9200W, has 14
single-keystroke feature keys which provide immediate access to the Internet,
e-mail, help functions, suspend mode, and control of CD functionality, making it
more like a control panel, says the company. Two programmable keys give similar
access to the user's most commonly used applications.
NMB Technologies, 9730 Independence Ave., Chatsworth, CA 91311; FAX (818)
Fibre Channel interconnects
It's not just fiber optics and optical components, but copper and cable as
well. The company's integrated Fibre Channel inter-connect components meet Fibre
Channel standards to provide one gigabit per second data-transfer rates. Fibre
Channel is aimed at high-bandwidth (speed and capacity) data networking and
storage needs in systems for manufacturing, medical, and video applications. The
components link such entire systems from storage devices to SAN/LAN cabling
distribution frames, to LANs, and, finally, to the desktop. Features for robust
performance include shielded GBIC connectors, guide frames, and modules that
Molex, 2222 Wellington Ct., Lisle, IL 60532; FAX (630) 969-1352; www.molex.com.
Receiver and emitter modules
Receiver modules have Si photodiodes (0.8 mm operation) or InGaAs photodiodes
(1.3 or 1.55 mm operation). Both include an internal preamplifier; handle 1 or
2.5 Gbit/s data rates; and are supplied in a TO-18 package or with SC connectors
for single-mode fiber operation. Emitter modules feature a Fabry-Perot laser
diode optimized for 1.3 mm operation; also operate at 1 and 2.5 Gbit/s; and are
only available with SC receptacles. Applications include fiber communications,
HDTV, and SDH data links.
Hamamatsu, Box 6910, Bridgewater, NJ 08807; www.hamamatsu.com
WL 12G photoelectric reflex sensor is sensitive enough for detecting glass
and transparent objects, or small parts. The device detects light off a
reflector and also features automatic sensitivity adjustment for changing
conditions, such as dust build up on its lens or reflector. Sensing range is
more than six feet.
Sick Optic-Electronic, 6900 West 110th St., Bloomington, MN 55438; FAX (612)
The low-power MSP430 family of microcontrollers (MCUs) now has integrated
low-power FLASH memories that enable manufacturers of energy-efficient systems,
such as handheld, battery-powered devices and utility meters, to use smaller
batteries; reprogram their products easily (reducing development time); and
allow easy field upgrades, according to the company. The MSP430 operates at 3V,
with the embedded FLASH drawing less than 350 mA/MHz in the active mode. In
standby mode, the FLASH needs only 1.5 mA, equal to MSP430 units using ROM or
OTP memories. The new MCUs go from standby to active in 6ms.
Texas Instruments, Literature Response Center, Box 172228, Denver, CO 80217
Model 1451 surface-mount pressure sensor uses what the company says is
advanced silicon die and package designs for improved long-term performance and
substantially lower cost. Features include non-linearity of 60.25% of full
scale; gauge and absolute pressure versions; multiple pressure-port options; and
compatibility with both automated production equipment and low-power
applications. Power is by either a constant current or voltage supply.
Applications include medical instruments, barometric correction, and pressure
EG&G, 2175 Mission College Blvd., Santa Clara, CA 95054; FAX (408)
Resistance temperature detector
The Thermal-TabTM features a high-stability, platinum resistance
temperature detector (RTD) packaged in a low-cost flat body suitable for
mounting on surfaces or inserted into probes and cavities, according to the
company. Completely insulated, the device comes with Teflon insulated leads in a
standard length of 40 inches. Element types include 100 and 1,000 V platinum.
NTC or PTC thermistors are available. Temperature range is -50 to 130C, and the
devices measure 5 @ 12 mm.
Minco Products, 7300 Commerce Ln., Minneapolis, MN 55432; FAX (612) 571-0927;
Hall position sensor
Model 155 non-contacting position sensor integrates a Hall-effect
magnetic-field sensor and a patented magnetic circuit to convert radial motion
into a voltage output signal. Standard electrical angles are at 60, 75, 90, 105,
120, 135, and 150º, all with an output signal of 0.5 to 4.5V dc. Standard
linearity is ±2% with special linearities to ±0.25%. The device features only
one moving part, which along with all circuitry and components is encapsulated
in epoxy. Temperature range is -40 to 150C. The sensor is EMC compliant to Class
C, 200 V/m to 1 GHz. Harsh environment applications also include underhood
automotive and marine equipment.
Spectrol Electronics Corp., 4051 Greystone Dr., Ontario, CA 91761; FAX (909)
Watertight field bus module
The small, watertight IP-67 Sensor/Actuator Block (SAB) has four digital
inputs and two digital outputs for INTERBUS I/O network connections. Rated to
NEMA 4, the device features the company's COMBICON pluggable connectors that
snap into watertight connector housings. Within the housings, two knockouts for
watertight cable glands allow powering the SAB locally or through the network
cable. I/O connections are through standard five-pin, 12-mm circular connectors.
A four-pin connector can be used if a ground is not needed. Two of the device's
connectors have dual inputs (for use with dual-outputs such as photo eyes) and
the other two an input and output (for devices with an input and output, such as
lighted push buttons.
Phoenix Contact, Industry & Systems Group, Box 4100, Harrisburg, PA
17111; FAX (717) 944-1625
Model 265 transducers provide positive and negative pressure sensing, at ±1%
full-scale accuracy, detecting pressure ranges as low as ±0.1 inch up to 100
inches of water column full scale. The transducers are targeted for static
pressure and air velocity control in environmental and medical applications. The
unit can be configured with a choice of voltage output (0 to 5V dc) or current
output (4-20 mA) and 12 or 24V dc (nominal) excitation. Model 265 is
temperature-compensated to less than 0.033% FS/oF of thermal error
for operation from 0 to 150F. The low-pressure sensor measures 1.89 3 2.74 3
1.64 inches and fits the tightest matrix.
Setra Systems Inc., 159 Swanson Rd., Boxborough, MA 01719; FAX (508)
The TBS20 trackball series offers many of the same features as the company's
TBSII line, but has a lower profile that takes up only 1.5 inches of below-panel
space. The sealed ball, three-point stainless-steel ball suspension, and
precision encoders give excellent feel and reliability in non-ideal
environments, says the company. A large 2-inch diameter ball allows for use with
gloves. Applications include industrial machine control, medical equipment, and
BEI, Encoder Systems Division, 13100 Telfair Ave., Slymar, CA 91342-3573; FAX
Mini power switches
MiniPROFETTM (for fully protected FETs) intelligent power switches
come in small PDSO-8 packages and have a quiescent current of less than 10 mA.
The devices contain a MOS power transistor plus MOS logic circuitry for built-in
protection. Rds(on) ranges from 60 to 400 mV. Smart functions allow
the devices to safely switch battery-powered loads in automotive (body control
modules, instrument clusters, and motor controls) and industrial (relay and fuse
replacement, dc motors, and power control) applications.
Infineon Technologies Corp., 1730 N. First St., San Jose, CA 95112; www.infineon.com.
INA133 and INA143 are high-speed, precision difference amplifiers aimed for
industrial process control, test and measurement, medical diagnostic, and data
acquisition systems. The devices consist of an operational amplifier and an
on-chip resistor network. Key specs of the INA133 (G=1) include: 1.5-MHz
bandwidth, 5-V/ms slew rate, 5-ms-to-0.01% settling time, 450 mV max offset
voltage, 5 mV/oC max offset drift, and 0.05% max gain error. INA143
provides gains of 10 or 0.1 and 150 kHz (G=10) with similar specifications.
Single versions come in SO-8 surface mounts and dual versions are packaged in
SO-14 surface mounts.
Burr-Brown, Box 11400, Tucson, AZ 85734; FAX (520) 746-7401; www.burr-brown.com.
High-resolution photolithography, thin-film coating, and electroforming are
used to produce high density, multilayer flexible circuits. These devices
feature 5 mm traces and spaces allowing use inside units with diameters as low
as 1.25 mm. In high-volume production, the microminiature flex circuits permit
installation of transmitters and transducers directly into intravascular,
subcutaneous or implantable medical devices for diagnostic imaging, monitoring,
and drug administration.
Dynamics Research Corp., Metrigraphics Div., 60 Concord St., Wilmington, MA
01887; FAX (978) 657-7765.
Karen Auguston Field on Power
Transmission & Motion Control
For comments on power transmission, contact Karen at firstname.lastname@example.org
During a recent visit to Quickdraw Conveyor Systems, I had an opportunity to
meet with president David Helgerson and see first-hand a working model of the
company's new Zone BufferingTM automated conveyor system. This
compact, low-profile system is a great example of the engineering ingenuity and
cleverness being applied in conveyor technology today.
Designed for handling disk drive components, semiconductor wafers, and other
products that require non-contact zones in the assembly process, the Zone
Buffering conveyor keeps individual products completely separated and protected
from hard stops. The whole trick, of course, is effectively managing those
zones, and Quickdraw engineers have come up with a pretty slick and simple way
of doing that by using two sensors per zone and a motor/controller. A
communication cable links each controller card to adjacent zones.
Here's how it works: The two sensors are located upstream of each zone (each
zone is slightly longer than the product handled), approximately one inch apart.
When a product is detected at the first sensor, the motor control will
decelerate the motor until the product reaches the second sensor. The major
advantage, of course, is that the product moves into its final position without
the banging or jarring of a sudden stop. And the final positioning will be more
accurate. An added benefit and an industry first, Helgerson pointed out to me,
is that the two-sensor configuration allows for bi-directional operation of the
conveyor--a feature that would ordinarily require repositioning of the sensors.
Inputs and outputs are user selectable for greater flexibility.
For the power transmission system, design engineers chose a dc brushless
servo motor, which provides speed and direction control in a small, high-torque,
economical package. Transmission of power between rails is accomplished with a
drive shaft, with a flexible coupling compensating for any slight misalignment.
The patented drive system permits zones as long as 60 inches, which says
Helgerson, reduces significantly the cost of long conveyor runs.
For clean room applications, each section (4-ft-long) of the modular system
can be housed in a Class 1 clean-room enclosure, which uses a ULPA filter to
provide a supply of clean air in a laminar, downward flow around the conveyor.
For more information on Zone Buffering Conveyors from Quickdraw Conveyor
Systems, contact David Helgerson, 151 East Cliff Rd., Burnsville, MN 55337 (612)
894-4305 or www.Qdraw.com.
More than 50% smaller than its predecessor, the SJ1000 is the smallest
sensorless flux vector inverter the manufacturer offers. Features include: auto
tuning to set motor constants, second motor setting, standard PID control,
16-stage multi-speed operation, and built-in in-rush current protection. Run and
stop keys and a speed-control knob are on the main panel; function, scroll up
and down, and store buttons are inside the front case. Users can program the
drive remotely or download programs from a PC.
Hitachi, Shuttleworth Close Gapton Hall Industrial Estate, Great Yarmouth,
Norfolk, U.K., NR31 0NQ; www.hid.co.uk.
A self-contained linear motor incorporating flexible bellows is rated for
continuous operation at 4m/sec and 4G. The bellows option enables linear motors
to be used in applications where the environment is less than ideal, including
Linear Drives Ltd., Lucky Lane, Basildon, Essex, England SS14 3BW; www.lineardrives.com.
A range of customized output shaft options is available for all the
manufacturer's brush-commutated and brushless dc motors and gearmotors. Shaft
options include: flat, journal, keyway, cross hole, slot, groove, swage, gear,
clutch, and pulley. Options can also be combined. Standard shaft material is 416
stainless steel, which can be customized to nonmagnetic grades including 303,
316, and high-carbon steel. Shaft diameters range from 1/8 to 3/8 inch and 4 to
6 mm, depending on model.
Pittman, 343 Godshall Dr., Harleysville, PA 19438; FAX (215) 256-1338; www.pittmannet.com.
SE 10 Inox Series positioning drives were developed for the foodstuffs
industry. Features include: resistance to rough environments, simple cleaning
and disinfection, control flexibility, direct mounting of special motors, and
smooth surfaces. Drive models can provide lifting forces of 2,000 to 100,000N
and positioning speeds up to 1,000 mm/sec.
NOZAG AG, Punten 4, Wangen, Switzerland CH-8602; FAX .
To promote motor operation and extend motor life, engineers may specify ball
bearings over sleeve bearings on the complete line of Pittman brush-commutated
dc motors, including LO-COG® series 8000, series 9000, and series 14000 motors.
Self-aligning ball bearings remove alignment and maintenance, cut friction, and
increase motor capacity. Double shielded and sealed, the ball bearings help
deter motor contamination and extend motor life.
Pittman, 343 Godshall Dr., Harleysville, PA 19438; FAX (215) 256-1338.
Size-17 SmartMotor, with built-in controller and amplifier, now comes with a
built-in brake. The fail-safe brake locks the rotor upon power loss. Achieving
actuation and release times on the order of 3 msec, the brake uses its own
voltage regulator so that, just like the SmartMotor, it operates on any single
24- to 48-V input. A variety of embedded commands actuate the brake
automatically. One mode locks the brake when any error occurs. Another releases
the brake only during moves to hold rotor position .
Animatics Corp., 3050 Tasman Dr., Santa Clara, CA 95054; FAX (408) 748-8725.
The MRA family of right-angle, low-backlash precision gearheads joins four
other all-planetary lines offered by the manufacturer. The line's bevel gear
output stage is integrated to the company's servo-grade, all planetary Type MNT
in-line gearhead series. The new all-steel gearheads mount readily to metric
face-and-shaft servomotors and can be specified for mounting to NEMA size 23,
34, and 42 servo or stepper motors. The initial three sizes are based on 65-,
80-, and 115-mm square planetary gearheads. Ratios range between 3 and 175 to 1.
Output torque ratings are up to 300 Nm.
Mijno Precision Gearing, 406 N. Prospect Ave., Park Ridge, IL 60068; FAX
(847) 698-9040; www.mijno.com.
Brushless dc motor
With all-stainless steel construction and high-speed miniature ball bearings,
this size-5 motor has a 0.5-inch diameter and operates at speeds up to 100,000
rpm. Threaded housings and shafts on the motor, and a range of single-stage and
double-stage planetary gearhead attachments, make the motor easy to integrate
into dental and surgical handpieces, miniature saws, and other medical devices.
Transicoil, 2560 General Armistead Ave., Norristown, PA 19403; FAX (610)
Complete actuator system
CARELINETM 24V dc actuators are for up to 1,250-lb loads and offer
a range of stroke lengths and mounting fixtures. An integrated control box
mounts directly on the actuator, or separately, for quick and easy installation
where space is at a premium. Each box controls up to four actuators, and can be
combined with a wide variety of handsets, foot switches, and attendant control
LINAK US Inc., 11001 Bluegrass Pkwy., Suite 100, Louisville, KY 40299; FAX
Jean Young Gonzalez on Test,
Measurement, & Control
For comments on test, measurement, & control, contact
Jean at email@example.com
Telatemp's new infrared thermometer has features you wouldn't expect in a
handheld instrument priced under $100. Simple to use, merely point it at a
surface and push a single button to return degrees in Fahrenheit or Centigrade
on an LCD screen. With a temperature range from 0 to 500F (-18 to 260C) and an
accuracy and repeatability of ±2%, the TempTesr IR is designed for temperature
sensing applications in industrial and electrical maintenance, heating and air
conditioning installations, and food quality and safety. A laser sighting model
emits a bright red laser spot for easy verification of the measurement location.
The unit weighs only 8 oz. and is powered by a standard 9V alkaline battery.
Telatemp Corp., 351 So. Raymond Ave., Fullerton, CA 92831; FAX (714)
High bandwidth oscilloscope
The HP 54835A Infiniium 4-channel, 1GHz oscilloscope is designed for
engineers working on high-speed digital designs that require sub-nanosecond
waveform edge speeds. It has a maximum sample rate of 4GSa/s with two channels
and a 2Gsa/s sampling rate with four channels. Memory depth ranges from 32K for
four channels to 64K for two channels. The oscilloscope's high bandwidth
accommodates fast bus and clock speeds for design applications involving digital
circuits. The new unit features these additions: a communications mask test kit
for easy compliance testing of communication and networking products;
color-graded persistence for viewing signal anomalies and determining frequency
of occurrence; waveform histograms for accumulating noise and jitter statistical
information; eye-diagram measurements for characterizing high-speed
communication signals easily; and an automask for generating a mask template
from a known good waveform quickly and easily.
Hewlett Packard, 5301 Stevens Creek Blvd. MS 54LAK, Santa Clara, CA 95052; www.tmo.hp.com
Eddy current testing software
SmartEDDY software offers expanded test capabilities for high-speed testing
of metal parts. The software converts an IBM-compatible computer into a powerful
multi-frequency, vector impedance or reflectance, direct or remote field,
eddy-current test instrument. The user can perform advanced real-time data
analyses including impedance, four-dimensional vector, time base, spectral,
correlation, and lift-off correction, as well as eight simultaneous parameter
and 32 threshold analyses. The new software options expand the standard test
software real-time analysis and display capability, add external control and
communications features, facilitate off-line data analysis and extend the
system's data storage capability. Key features include direct display of
conductivity, permeability, hardness, case depth, wall thickness, coating
thickness, hole diameters, flaw depth and weld penetration.
SE Systems, 26203 Production Ave, Suite 10, Hayward, CA 94545; FAX (510)
Emissivity correcting IR thermometer
Pyrofiber IR thermometer is designed for high-speed data collection and
analysis. The unit uses pulse laser technology to measure infrared radiance
while measuring and correcting for emissivity. Pyrofiber can measure temperature
values at a 1-ms data acquisition rate, allowing digital signals to be output at
a rate of 40 readings per second. True target temperature and emissivity values
can be output via analog or digital signal to a PC or network mainframe for
analysis. Accuracy is to within ±5F (±3C). Temperature models between 500 to
5400F (250 to 3000C) are available with target size ranges between 0.040 to
2.300 inches (1 to 58 mm) diameter at a focal distance from 4 to 120 inches (101
to 3048 mm). Custom fiber optic sensor heads and probes are available.
Pyrometer Instrument Co. Inc., 209 Industrial Pkwy., Northvale, NJ 07647; FAX
(201) 768-2570; www.pyrometer.com.
Eagle Signal B90D DIN rail timer delivers digital setting accuracy combined
with the flexibility of multiple time ranges and operating modes in half the
space of a standard sized plug-in time delay relay. The device measures just
22.5 mm wide, by 93 mm high, by 100 mm deep, and provides simple setup and
troubleshooting via its LCD display. B90D offers field selectable functions and
timing modes for settings from 0.2 sec to 999 hrs with digital accuracy of ±0.5%
and mounts on a standard DIN rail with the spring clip.
Danaher Controls, 1675 Delany Rd., Gurnee, IL 60031; FAX (847) 662-6633; www.dancon.com.
Designed for PLC applications, fex21 Windows CE-based handheld computer
provides VT100 emulation, RS485 interface, various keyboard configurations and
integrated RF communications. The fex21 offers monochrome and color
transflective display technology. Its rugged casing protects against dust,
vibration, temperature extremes and harsh operating conditions in manufacturing
WPI Husky Technology, 18167 US Hwy. 19 North Suite 285, Clearwater, FL 33764;
FAX (727) 536-9906.
Piston mount telemetry system
ST-363 Piston Mount Transmitter provides real-time telemetry from within
operational combustion engines. This rugged, high temperature telemetry product
allows users to access and validate critical engine operating parameters, such
as measurements of crown/skirt operational temperatures, inner ring gas
pressures, ring dynamic displacement characteristics, and torque and strain
measurements. The miniaturized mold of the product supports instrumentation of
up to 16 mixed sensor types for piston sizes as small as 4 inches in diameter.
SRI/PMD Inc., 751 North Drive, Melbourne, FL 32934; FAX (407) 254-2492; www.summationresearch.com.
Brushless dc motors
NEMA DIN34 series brushless dc motors are 3.4 inches in diameter and
available in three standard frame lengths of 2.0, 2.6 and 3.2 inches with rear
shaft extension for encoder mounting. Typical operating speeds range from 6,000
to 18,000 rpm with continuous stall (and peak) torque ratings of 50 oz-in. (120
oz-in.), 100 oz-inch (250 oz-inch) and 135 oz-inch (350 oz-inch). Modified
configurations are available for other torque and operating speeds.
BEI Sensors & Systems, 804-A Rancheros Dr., San Marcos, CA 92069; FAX
(760) 744-0425; www.beikimco.com.
Motor fault diagnosis
SERIPLEX module allows simplified motor monitoring and network control of
NEMA Type S contactors, starters and overload relays. The module allows controls
to be linked by a single plug-and-play sensor bus cable and is compatible with
Square D's NEMA Type S Motor Logic products from sizes 00 to 4. Applications
include automotive, conveyance, transportation and other continuous process
Square D, 1450 South Roselle, Palatine, IL 60067; FAX (847) 925-7271; www.squared.com.
Field configurable indicator
VisiPak Model V116 field-configurable indicator features three setpoint
alarms, one or two relay outputs, and a NEMA 4-front panel that fits into a
standard 1/16 DIN cut-out. The unit can be configured to accept any process
variable or temperature input including 0-10V, 4-20 mA, Platinum 100-ohm RTD, or
thermocouples (J, K, T, L, N, R, S, B and C). Model V116 comes with 85 to 265V
ac or 20 to 29V dc power options and a digital I/O terminal that can be
configured to accept an alarm input or to provide a TTL signal or relay output.
Temperature, weight, flow, pressure, speed and position are some of the process
variables that can be accurately measured.
Action Instruments, Inc., 8601 Aero Dr., San Diego, CA; FAX (858) 279-6290;
Test and measurement software
DIAdemTM provides a PC workshop for the acquisition and management
of measurement data under Windows (3.x, 95/98/NT). The software contains tools
for data acquisition, monitoring, open/closed loop control and real-time
displays. Post-analysis functions including basic arithmetic manipulation,
advanced tools for statistics, curve fitting, classifications, FFT analysis,
digital filters, 3D/6D matrix manipulation and versatile graphs are also
provided. Special modules are available for advanced analysis methods. Any
number of axes, signals or texts can be displayed graphically and measured using
cursors to obtain peak, delta-x and delta-y values.
GFS Inc., 43000 West Nine Mile Rd., Novi, MI 48375; FAX (248) 344-9536; www.gfsinc.com.