Thread eliminates loss of loose hardware
Unlike loose wingnuts and mounting nuts which can become lost, cause damage to equipment, or create liability problems, the Captive Nut can be mated with a variety of externally threaded hardware to speed attachment of outer panels, subassemblies, or components. An internal thread and ferrule help to position panels while being fastened. A thru-hole version accommodates wide variations in frame and panel thicknesses, as well as gasket compression and set. A blind-hole version provides a neat, clean appearance. The Captive Nut assembly is designed to be hand operable and accept products with standard metric or imperial thread sizes.
Southco Inc., 210 N. Brinton Lake Rd., Concordville, PA 19331, FAX (610) 358-6327
Kit provides portable accessto rivets
POP® maintenance kit is for small repairs and is useful for general commercial applications, aluminum gutters and downspouts, appliances, shipping containers, steel cabinets, and store displays, as well as plastic machine housings and covers. The kit contains 12 types of aluminum rivets ranging from 1/8- to 3/16-inch in diameter and from 1/8- to 1/2-inch in grip range. Repair and maintenance tasks are easily performed with a total of 450 rivets.
POP Fasteners, 510 River Rd., Shelton, CT 06484
Enclosure provides many mounting options
Concept™ operator-interface enclosures accommodate flat-screen displays. Numerous mounting options, including wall mounting, pendant, or pedestal, are possible with this enclosure system. Four sizes are available in each of three body styles: solid-back, rear-access, or double-hinged. A swivel tilt mechanism can be used with either pedestals or pendant arms to provide 350 degree rotation and 30 degree tilt from the horizontal. All Concept operator-interface enclosure bodies are rated UL/CSA Type 4 and 12, and IP 66. Hinged fronts and deep-hinged windows are rated UL Type 12, CSA Type 4 and 12, and IP 55.
Hoffman Engineering Co., 900 Ehlen Dr., Anoka, MN 55303, FAX (612) 942-6940
Film tape offers strong bond
9731 double-coated film tape is suited for splicing, mounting, bonding, and temporary holding applications in the paper, rubber, electronics, transportation, and medical industries. The tape features a moisture-stable release liner on the acrylic adhesive side of the carrier and a polyester film release liner on the silicone adhesive side. A firm, pressure-sensitive silicone adhesive coated on the inside of the polyester film carrier provides bonds on silicone surfaces with a strong resistance to high temperatures and many solvents. An acrylic adhesive system on the outside of the carrier provides high-performance bonds on most papers, plastics, and metals.
3M, Industrial Tape and Specialties Div., 10701 Hampshire Ave. S.,Bloomington, MN 55438, FAX (612) 733-0729
Tubing enables positive identification
PAN-SHRINK™, yellow and green striped, "HSST", thin-wall, heat-shrink tubing is for use in identifying ground wires in appliances and other equipment. The yellow and green stripes are a co-extruded polyolefin material and will not rub off or fade. The permanent color enables positive, long-term identification of ground wire. The tubing is UL recognized and CSA approved, and offers a 600V continuous rating with an operating temperature range of -55 to 135C. The tubing is available in diameters from 1/8 to 1 inch and is packaged on 25-ft reels for easy dispensing, or in bulk in 4-ft lengths.
Panduit Corp., 17301 Ridgeland Ave., Tinley Park, IL 60477, FAX (815) 836-1811
Back boxes provide maximum wiring capacity
Nonmetallic back-box enclosures are for use with pin-and-sleeve and watertight Safety-Shroud™ Twist-Lock® wiring devices used in hostile and abusive environments. The back box is made of a high-grade thermoplastic that meets IP67 requirements and resists chemicals, abuse, and UV rays. It has an internal ground plate to allow grounding with a metallic conduit, and it is Type 4X when installed with a watertight conduit hub. The back box is designed with a 15-degree angle for a receptacle to help prevent strain on a heavy cord exiting the plug. It is available in three hub sizes: 1 inch for devices rated 20 and 30A, 11/4 inches for devices rated 60A, and 11/2 inches for 100A-rated devices.
Hubbell Inc., Box 3999, Bridgeport, CT 06605, FAX (203) 579-2892
Clamps deliver holding capacity to 6,000 lbs
Heavy-duty toggle clamps deliver holding capacity up to 6,000 lbs for applications in automotive manufacturing and other production environments that require high-clamping forces and long-service life. The clamps feature holding capacities of 750, 2,000, 3,000, or 6,000 lbs. They can be ordered as complete clamps or as basic toggle mechanisms mated with optional handles, grips, clamping arms, and base plates. The complete clamps come with either a straight base or integral, flanged base. Precision, close-tolerance, steel components throughout provide smooth operation.
Carr Lane Mfg. Co,. 4200 Carr Lane Ct., St. Louis, MO 63119
Enclosures withstand vibrations
EMCOR electronic enclosures withstand the seismically induced vibration of earthquakes. The enclosures feature strong, fully welded steel frames that carry weight loads up to 800 lbs under seismic conditions. They offer 13/4-inch-wide, multi-formed frame channels with fully welded steel, finished corner-joint construction, and additional flanging and welding reinforcement. Also included are specially designed doors, side panels, and machine screw hardware for added strength. The EMCOR enclosure is available in panel widths of 19 and 24 inches to house a wide variety of electronic equipment.
Crenlo Inc., 1600 4th Ave. North, West Rochester, MN 55901
Coupling allows less than 1 ml spillage
EPSILON™ chemical transfer coupling and containment system features a convex/concave ball-valve design with redundant mechanical interlocking systems on both halves of the coupling. The ball valve shuts off fluid pressure and allows for easy and safe connecting and disconnecting. In application, the mechanical interlocking system keeps the coupling halves together, making it impossible to disconnect when fluid is flowing. The combination of stainless steel with PTFE seals allows for safe connection and disconnection of liquid lines at operating pressures up to 150 psig, with less than 1 ml of spillage.
Aeroquip Corp., 3000 Strayer, Maumee, OH 43537
Clamp offers quick installation
Speed Clamp is for semi-permanently fixing a part, such as a fluid-conveying hose, dustproof bellows, or axial boot, on the circumferential surface of a mating device. Even if the mating device looses its elasticity because of aging, the clamping device maintains its permanent, stable, firm clamping state. An operating tool forces the inner and outer overlap portions of the clamp band to spread until the seizing tooth of the inner overlap portion and the fixed tooth of the outer overlap portion seize each other, thereby contracting the bore diameter of the clamp band.
Mid-West Spring Mfg. Co., Kenlock USA Div., 1935 E. Laketon Ave., Muskegon, MI 49442, FAX (616) 777-2707