In the Marketplace

Vision Sensor

Delivers high-speed error-proofing and inspections

Able to accurately sense and evaluate more than 10,000 objects per minute, the P4 EDGE is fit for validating the height and width of parts, location of labels, or detecting the edge of materials such as plastic or paper on a Web operation. Other features also make it easy to deploy and be operational quickly. For applications where product lines are constantly being changed, a remote TEACH feature allows the sensor to learn new elements it will need to inspect for without connecting to a PC or shutting down the line. It can interface to machines and factory networks via its built-in 10/100 Ethernet connection, RS-232, or discrete input/outputs. Included mounting brackets facilitate easy location of the P4 EDGE sensors on machines or conveyors. The units feature three bicolor LED indicators to clearly show unit status during setup and operation. Banner Engineeringhttp://rbi.ims.ca/4408-576

Pressure Sensor Module

Low-power, low voltage

Intended for consumer, medical, and general application for barometric pressure/altitude, the MS5534B is an SMD-hybrid device including a piezo-resistive pressure sensor and an ADC-interface IC. It provides a 16-bit data word from a pressure- and temperature-dependent voltage. Additionally the module contains six readable coefficients for a highly accurate software calibration of the sensor. The MS5534B comes with automatic power down (on/off) switching, and a three-wire interface for all communications with a microcontroller. Sensor packaging options are plastic or metal cap. Compared to the previous generation, the temperature range has been improved (-40 to +125C) as well as the pressure range (measurement down to vacuum). Other improvements have been made with ESD sensitivity, current consumption, and converter accuracy. Servoflo Corp.http://rbi.ims.ca/4408-577

Angular Position Sensor

Intrinsically linear

The new "ILAPS" non-contact angular position sensor provides intrinsically linear output over 120-degree maximum travel without the need for electrical compensation. According to the company, it is fit for pedal, throttle, and valve position sensing. Complete technical information and a free product sample are available upon request. Cherry Electrical Productshttp://rbi.ims.ca/4408-578

Two-Phase Hybrid Stepper

Miniature in size

The 208 is reportedly the smallest two-phase hybrid stepper to date. This 1.8-degree bipolar NEMA 8 miniature step motor is intended for applications where space is limited. The motor measures 0.79-inch square and is available in two stack sizes: 1.30 and 1.69 inches in length. Although it weighs a mere 0.13 lbs, it is still capable of up to 4.2 oz-inch of holding torque depending on stack size. The 208 is also available with a standard rear shaft extension. Suitable applications are medical, communications, semiconductor, and robotics. Lin Engineeringhttp://rbi.ims.ca/4408-579

Analog Sensors

With non-traditional housings

Non-traditional housings styles are exemplied on the Bi20R-Q14-LU ring style and the Wi70-M18-LIU5 probe style sensors. These analog sensors are specified with a repeatability of less than 0.5 percent and linearity of 3 percent. The Bi20R-Q14-LU is a three-wire, 15-30V dc sensor with a 0-10V output in a ring style housing with a 20 mm diameter hole. This sensor is fit for the identification and sorting of small parts (such as screws) as the sensor generates a different output signal for each size part. Position control applications can be resolved with the Bi20R-Q14-LU by means of a cone-shaped target as well as the detection or measurement of tools (such as drill bits). The Wi70-M18-LIU5 is a four-wire, 15-30V dc analog sensor with either a 0-10V or 4-20 mA output. Housed in a standard 18 mm barrel, the 75 mm probe has a linear operating distance of 70 mm. This probe style sensor can detect all metals and can be used in a variety of areas, such as the positioning of metal parts as they move over the length of the probe. TURCKhttp://rbi.ims.ca/4408-580

Low-Cost Pressure Sensor Module

For pressures up to 0.5 psi

A small six-pin pressure sensor, the FPM-005PG is designed for consumer, medical, and general applications for pressures up to 0.5 psi. Users include HVAC, breathalyzer, and breath detection (apnea, oxygen conservers). Servoflo Corp.http://rbi.ims.ca/4408-581

Hall-Effect Snap Switch

Comes with sensing fuctions

The D4 Series snap-action switch with Hall-effect technology is tested to 10 million operations and reportedly goes where no switch has gone before. Technical information and a free product sample are available upon request. Cherry Electrical Productshttp://rbi.ims.ca/4408-582

Multi-Segment Type 4 Safety Light Curtain

Allows for quick setup and changeover for different job requirements

The MiniSafe Flexible MSF4700 family of safety light curtains are engineered to withstand high shock and vibration environments typical of punch presses and other heavy industrial machinery. Their multi-segmented design allows them to protect up to four different openings by connecting up to four 35 × 50 mm housings in sequence. Protected heights from 150 to 1,800 mm and resolutions of 14 mm, 20 mm, and 30 mm are also available, with any combination thereof being possible. This ability to customize height and resolution for each light curtain segment allows for a true custom fit to the specific machine. In addition, remote fixed-blanking allows for quick setup and changeover for different jobs. The controller is available in a 35 mm DIN IP20 enclosure with 24V dc solid-state safety outputs. It is also available in a 14 gauge steel IP65 lockable enclosure with a choice of solid state or dry contact outputs (mechanical relays). Scientific Technologies Inc.http://rbi.ims.ca/4408-583

Optical Proximity Sensor

Long-distance reflective switch can detect objects up to 24 inches away

The OPB720 Series sensor is packaged in a miniature plastic housing that measures just 1.1 (27.9 mm) × 0.68 (17.3 mm) × 0.033 (8.4 mm) inches. It is suitable for most industrial machines, material handling equipment, and packaging equipment, as well as high-volume commercial applications. It consists of an infrared LED and a photodetector, and objects as small as 0.08 inches (2 mm) can be recognized by the sensor at distances up to 8 inches (203 mm). The OPB720 sensor features collector dc current of 50 mA, with power dissipation at 300 mW. The sensor can switch from high level with no reflection target to low level with reflection. Designed to be compatible with most PLCs, the OPB720 sensor features open collector output, with an operating power requirement of 30V. OPTEK Technologyhttp://rbi.ims.ca/4408-584