These blocks are built and tested to meet UL CSA and IEC standards, and are rated for Code 1, factory wiring only, and Code 2, for both factory and field wiring. Screw clamp is available from 20-232A, and spring clamp from 20-50A. Miniature panel mount is also available from 20-35A, in both spring and screw clamp. Specialty blocks include ground, multi-level, sensor, multi-conductor, fuse holder(for IEC and North American control circuit fuses) and disconnect. Multi-level terminal blocks make 3-wire sensor installation easy. There are up to eight different colored terminal blocks for circuit identification, and blank, standard or custom markers are available from 5-20 mm wide. Plotter systems and accessories are available for making custom markers, too. c3controlshttp://rbi.ims.ca/4928-621
Linear guides are one of the most important components required for the design of automated or computer-controlled equipment. Aluminum profile extrusions, used for these guides, can enable designed-in functional features.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.