This new series of controllers are made to replace ordinary electromechanical circuit breakers, and can switch, monitor, report status and provide circuit protection for circuits from 2 to 25 amps within MIL-STD-1275 voltage limits and conditions. They offer current flow status, load voltage status, trip status signals and built-in transient suppression. They offer the protection of a traditional circuit breaker and the control options of solid-state technology. They measure 2.74 x 1.34 x .370 inches, or 69.6 x 1.34 x 9.4 mm, and have an additional 0.24 inches, or 6.1 mm for pin depth, and weigh 2.3 oz, or 65g. They cost $500 each in quantities of 500 units. Teledyne Relayshttp://rbi.ims.ca/4928-596
A make-your-own Star Wars Sith Lightsaber hilt is heftier and better-looking than most others out there, according to its maker, Sean Charlesworth. You can 3D print it from free source files, and there's even a hardware kit available -- not free -- so you can build one just in time for Halloween.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies.
You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived.
So if you can't attend live, attend at your convenience.