This device runs off USB 2.0 through a PC, and has arbitrary digital waveform generator and logic analyzer capabilities. Engineers can use the tool to access electronic systems from any PC-based workstation. It can access almost any port within 16 address/data lines and 6 control lines up to 50MHz. It has a maximum speed of 100 MB/s burst performance over the 16 KB internal memory depth. Built-in hardware acceleration frees up plenty of bandwidth for data transfer. It has 16 bidirectional data pins, 6 bidirectional control pins, I/O voltage 1.2V to 3.3V, and a system interface frequency up to 50MHz. It is available from stock at $1,187 each.
Sensor deployment in automated factories should be done slowly and conservatively, otherwise engineers may face the loss of hundreds of thousands or even millions of dollars, an Internet of Things expert will tell attendees at the upcoming Design & Manufacturing Show in Minneapolis.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies.
You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived.
So if you can't attend live, attend at your convenience.