Multi-level laminated bus bars feature capacitors, mounted with pressed-in-knurled connectors designed to hold the axial capacitor leads, and insulated gate bi-polar transistors (IGBTs), which are bolted to the surfaces. The bus bar connects IGBTs and capacitors in parallel, through the dc link of this circuit, to distribute power to the motor. The individual copper layers use offsets to locate various contact surfaces to their required locations.
Eldre Corp., 1500 Jefferson Rd., Rochester, NY 14623, FAX (718) 272-0018.
When you think of the DARPA Robotics Challenge, you may imagine complex humanoid contraptions made of metal and wires that move like a Terminator Series T-90. But what actually happened at the much-vaunted event was something just a bit different.
Traditional dev kits are based on a manufacturer’s microcontroller, radio module, or sensor device. The idea is to aid the design engineer in developing his or her own IoT prototype as quickly as possible. A not-so-traditional IoT development kit released by Bosch aims to simplify IoT prototyping even further.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.