Often, demonstrations on the floor of shows like National Manufacturing Week emphasize
features that arenít necessarily critical in the real world. But one facet of
Baldor Electric Co.ís OptiGen adjustable speed generator is important in both
locations. Itís much smaller than competitive products and itís quieter.
Thatís just as important at most of the sites where the generator will be
used. Size benefits of the compact unit will vary, but it can trim size
requirements by up to 50%.
While size is important in many fields, OptiGenís biggest advance is the use
of electronics to adjust the systemís motor to match the power requirements as
they change. The motor in the OptiGen generator will speed up when power
requirements rise, providing more power. In normal operation, that motor spins
at 1,800 rpm. But when motors start or other temporary power demands arise, the
motor can increase speed to up to 2,500 rpm, which also increases its output.
Since most high power demands are relatively short, this technique is quite
effective, Baldor spokesmen say.
Adjusting speed in this fashion saves energy and lets users employ smaller
generators. It can also reduce acoustic noise by as much as 25%. There are also
substantial energy savings over fixed systems, which often have to produce twice
the power thatís normally needed in order to meet peak requirements.
In a world that's going green, industrial operations have a problem: Their processes involve materials that are potentially toxic, flammable, corrosive, or reactive. If improperly managed, this can precipitate dangerous health and environmental consequences.
The 3D printing revolution seems to have a knack for quickly moving technology ahead by way of collaborative effort and even a little friendly competition -- all of course in the name of scientific advancement.
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is