Large moments caused by non-axial loads can shorten the service life and damage the performance of pneumatic actuators. To address that problem, engineers from Bimba Manufacturing Co. have designed the PneuMoment pneumatic cylinder. PneuMoment's large bearing surfaces are designed to resist high side loads and large moments. The unit, which is available in a 27-mm bore size, offers standard side and end ports for easy plumbing. An optional auxiliary port allows air or vacuum through the actuator from the guide beam end cap to connect additional automation devices, such as grippers. Bimba Manufacturing Co: Product Code 4189.
Everyone has had the experience of trying to scrape the last of the peanut butter or mayonnaise from the bottom of a glass jar without getting your hand sticky. Inventor Ron Jidmar thinks he has a solution to all of that nonsense with a flexible jar design that can be squeezed with one hand to lift contents from the bottom to the top of a jar or container, leaving the other hand free to scoop the contents out cleanly.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.