Non-metallic right-angle connectors for Heyco-Flex I conduit and Heyco-Flex II tubing offer a liquid-tight connection. No disassembly is required to attach the conduit onto the connector or tubing. Simply push the conduit onto the connector ferrule, then hand tighten the domed sealing nut. Since the conduit is not threaded onto the ferrule (simply turn the conduit in a clockwise direction while pushing on the connector), no potential leak paths are created, and both the connector and conduit are reusable. In addition, the connectors feature a 90-degree bend that reduces the space required to route the conduit or tubing in the desired direction. Heyco Products Inc. Product Code 4320
Festo's BionicKangaroo combines pneumatic and electrical drive technology, plus very precise controls and condition monitoring. Like a real kangaroo, the BionicKangaroo robot harvests the kinetic energy of each takeoff and immediately uses it to power the next jump.
Design News and Digi-Key presents: Creating & Testing Your First RTOS Application Using MQX, a crash course that will look at defining a project, selecting a target processor, blocking code, defining tasks, completing code, and debugging.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.