DC POWER SUPPLIES
The model 1689 and model 1690 are two new regulated 28A dc power supplies.
Using a standard 115V ac as power source, both bench-top units can provide
variable voltage outputs of 1 to 15V dc, and up to 28A (at 13.8V) in continuous
operation. They were specifically designed for use with radio equipment, and as
car-battery substitutes for high-power car stereos, cellular phones, or ham
BK Precision, 1031 Segovia Circle, Placentia, CA 92870; FAX (714) 237-9214;
Flanged immersion heaters
Glo-Quartz® flanged immersion heaters, for tanks or pressure
vessels, are intended for liquid or gas heating applications. Standard model
flanges in sizes from 2 to 14 inches are rated for 150 lb pressure class. And
optional rating models are available to meet standards for 300, 400, 600, and
900 lb. classes. Flanges and heating elements are available in a variety of
materials. Standard operating voltages are 240 and 480V ac. Heaters are
available in immersion lengths from 131/2 to 863/4 inches.
Glo-Quartz Inc., 1550 S. Euclid Ave., Tucson, AZ 85713-1712; FAX (520)
A new flat-profile proximity sensor combines a new piezoelectric transducer
and microprocessor technology for reliable detection of a wide variety of label
edges as thin as 0.051 mm. Featuring a 25.4-mm deadband for close-up mounting,
the Superprox® model SM607A-A08 has a fixed sensing window of 12.7 mm
within a sensing range of 38.1 mm.
Hyde Park Electronics, 1875 Founders Dr., Dayton, OH 45420-4017; FAX (937)
Multi-axis laser system
The Laserdyne® 790 BeamDirector® is a high-speed
cutting, drilling, or welding system for flat or 3D parts that can be integrated
with either Nd:YAG or CO2 lasers. The product has a five-axis beam
motion that allows a part to remain stationary during processing. It is suited
for applications in automotive, aerospace, job shop and general manufacturing
GSI Lumonics, 105 Schneider Rd., Kanata, Ontario K2K 1Y3, Canada
Three new ProformTM polyamide hot melts offer both thermal
stability and chemical resistance, up to a UL 94 V-O flammability rating for
electrical applications. New Proform 3640, 3641, and 3642 are single-component,
water-, and solvent-resistant adhesives and molding polymers that offer adhesion
to most surfaces.
Loctite, 1001 Trout Brook Crossing, Rocky Hill, CT 06067; FAX (860) 571-5465.
USB keyboard encoder
The USAR GeniKeyTM is a bootable USB keyboard with built-in PS/2
port. It allows systems that do not come with PS/2 ports to use readily
available PS/2 output devices, without special drivers. And a USB hub is
unnecessary, because the second USB port can be used for other devices.
USAR Systems Inc., 568 Broadway, New York, NY 10012; FAX (212) 226-3215; www.usar.com.
Wire and tubing cutter
The model WC300 automatic wire and tubing cutter is a compact,
stepper-motor-driven cutter that can process wire and small cables from 2.59 to
0.025 mm, and sleeving or tubing up to 7.93mm. The product can cut up to 12,000
pieces per hour of 25.4-mm wire, or 6,900 pieces per hour of 254-mm wire.
Eraser Co., Inc., Box 4961 Oliva Dr., Syracuse, NY 13221-4961; FAX (315)
Series 2565, a 2.5-inch-diameter assembly, features a brushless resolver,
assembled directly on the shaft to handle rapid reversals and sustained
operation at high speeds. Internal connections, a compression-type strain-relief
connector, and liquid seal make cable clamping easy. Construction includes: an
O-ring; sealed-aluminum housing and cover with Iridits finish; and stainless
steel, 3/8-inch-diameter input shaft, ball bearings, and hardware. Options
include shaft diameter and square flange.
Neotech Inc., 2295 Amber Dr., Hatfield, PA 19440; FAX (215) 822-5520.
New features have been added to the Simatic S7-200 line of micro-programmable
logic controllers to improve performance in an enclosure 44% smaller than
current models. Controller improvements include faster scan speeds of 0.37 msec
per instruction from four to six simultaneously and independently operating high
speed counters at 30 kHz each; two simultaneous, pulsed high-speed outputs at 20
kHz each, up to 6.5 Kwords of memory; improved communication functions and speed
to 187.5 KB. Configurable analog input filters have been added. Simatic S7-200's
MicroWIN-32 software now includes a new Function Block Diagram Editor and
Siemens Energy & Automation Inc., 3333 Old Milton Parkway, Alpharetta, GA
30005; FAX (770) 453-3484.
Digital servo amplifiers
Expert series of digital servo amplifiers incorporate high-speed signal
processing, power semiconductor technology, and integration to control linear
and rotary motor driven stages and systems. The amplifier's digital inverter
regulates the drive in a four-quadrant mode. All drive system parameters are
software configured. With no jumpers or balancing pots to set, servo performance
does not degrade over time or temperature change. The Expert series come in a
range from 2- to 40-kVA power models. Bus voltages range from 160 to 650V dc.
These drives are compatible with brushless linear servo, ac servo, and induction
Anorad Corp., 110 Oser Ave., Hauppauge, NY 11788; FAX (516) 435-1612.
Double-D shaped gasket aims to improve EMI shielding for plug-in modules. The
gasket allows bi-directional wiping action without damaging the gasket or
degrading the shielding, says the company. Double-D gasket is compatible with
current rack designs because its height is similar and its width matches that of
the BeCu strips. The gasket consists of a highly conductive silver fabric over
open-cell urethane foam that is shaped to withstand bi-directional wiping
forces. A cross-section shows two half circles connected by a flat polycarbonate
insert embedded in the foam to ensure rigidity.
Schlegel Systems Inc., 1555 Jefferson Rd., Rochester, NY 23197; FAX (716)
Solid aluminum handle assembly with stainless-steel leaf spring meets IEEE
1101.10 specifications for cPCI and VME64 bus extension applications, and is
targeted for rugged COTS requirements. An inject/eject handle retains a true
U-height in the open position, allowing units to be stacked.
Triple E Corp., 60 Foot of Crosby St., Lowell, MA 01852; FAX (978) 453-1196.
Instrument-quality miniature plastic fittings include barb, luer, and
threaded fittings. Configurations include T, Y, elbow and couplers. Fittings are
available in nylon, polypropylene, polycarbonate, radiation-stable
polycarbonate, and Kynar. All fittings have no parting line on any critical
Value Plastics Inc., 3325 Timberline Rd., Fort Collins, CO 80525; FAX (970)
The SN60MC metal connector nailer helps operators meet high-wind and
earthquake building codes by fastening different joist hangers, connector
plates/straps, knee braces, and tie-downs. The SN60MC is equipped with the
PrecisePoint® hole-locating safety system for increasing driving
accuracy and preventing damage to framing and decking connectors. The tool
drives 1 ½- and 2 ½- inch moisture-resistant, tape-collated nails with shank
diameters of 0.131, 0.148, and 0.162 inch.
Senco Products Inc., 8485 Broadwell Rd., Cincinnati, OH 45244.
Steelflex® grid couplings are made of high-strength alloy steel
and feature a tapered grid flexing element tempered to spring hardness, with the
grid surface then precision shotpeened to compress surface molecules.
Replacement grids drop-in without the need to move and realign connected
equipment. The couplings protect driving and driven equipment from misalignment,
vibration, and shock and thrust loads.
The Falk Corp., Box 492, Milwaukee, WI 53201; FAX (414) 937-4359.
PopLock fastening system compresses and swages a steel or aluminum sleeve,
creating a removable hex nut onto a drawn arc-welded stud in less than two
seconds. This handheld setting tool resembles an outsized pistol with a
pulling-head nose piece that holds an unthreaded sleeve that slides over a
threaded stud. PopLock weighs 2.8 lb and is available with four pulling heads,
from 120 to 330 mm. Nose housings accommodate steel or aluminum sleeves.
Emhart Fastening Teknologies, 510 River Rd., Shelton, CT 06484; FAX (203)
DURABOND 260NC flowable, industrial-grade epoxy potting compound is for
bonding, potting, and encapsulating applications. Once mixed, this two-part
adhesive sets at room temperature to form a rigid, black encapsulant that is
non-corrosive to copper-based components on electrical and electronic
assemblies. DURABOND 260NC's low viscosity allows it to flow around components
in electrical housings, thereby unitizing multi-component assemblies.
Loctite Corp., 1001 Trout Brook Crossing, Rocky Hill, CT 06067; FAX (860)
Light Weld® adhesives form water-clear bonds in seconds to glass
and many plated metal and plastic substrates. The non-yellowing bonds are able
to withstand hundreds of dishwasher cycles and severe environmental conditions.
Applications include bonding and laminating automotive and architectural glass
as well as optical and lens-bonding applications. The adhesives also form
structural strength bonds between glass and other substrates such as ceramic,
ferrite metal, and plated-metal surfaces.
Dymax Corp., 51 Greenwoods Rd., Torrington, CT 06790; FAX (860) 496-0608.
The UV15-7LRI single-component, high-viscosity clear UV-curable adhesive
matches the refractive index of glass. The system cures rapidly at room
temperature when exposed to a UV light, and the compound's cure can be carried
out in the presence of air. High bond strengths are obtained with glass and
ceramics as well as other substrates including optical plastics.
Master Bond Inc., 154 Hobart Street, Hackensack, NJ 07601; FAX (201)
Woven glass laminates
ULTRALAM® 1000 Series woven, glass-reinforced
polytetrafluoroethylene (PTFE) laminates match the dielectric constant and loss
tangent characteristics for printed circuit boards. The laminates come in 4 x 4
ft and 12 x 18-, 24 x 18-, and 24 x 26-inch sheets, and standard thicknesses of
0.020, 0.031, and 0.062 inch for dielectric constants of 2.171, 2.50, and 3.0.
Applications include common antenna and amplifier systems.
Rogers Corp., Box 188, Rogers, CT 06263; FAX (860) 779-5509.
The P4000 pressure sensor incorporates MEMS technology into an all-welded,
stainless steel package designed to withstand pressure fluctuations and
vibration in hydraulic equipment. It is suitable for applications with pressures
from 0 - 8000 psi. Pressure connection options include a variety of straight and
tapered thread configurations. Electrical connection options include AMP,
Packard, DIN, Deutsch, hermetically sealed MS connectors, and molded cables.
Kavlico Corp., 14501 Los Angeles Dr., Moorpark, CA 93021; FAX (805) 523-2000;
Radial diaphragm valves
The DR series of patented radial diaphragm valves eliminates entrapment areas
and drain easily. Each valve in the series includes multiple valves and multiple
ports. Manufactured in a wide range of configurations, they require less piping
and fewer connections. Valve bodies are machined from 316L stainless steel bar
stock for avoidance of porosity found in cast valve bodies. Users choose from
manual or pneumatic actuators.
Swagelock, 31400 Aurora Rd., Solon, OH 44139; FAX (440) 349 5806.
The 3013 miniature diaphragm pump is suitable for pneumatic applications such
as gas analysis and air monitoring systems where consistent flow delivery is
important. It has a snap-and-clasp, press-on head. The 3013 pump produces 450
mbar pressures and 10-inch Hg vacuums.
ASF Thomas Industries, 2100 Norcross Pkwy., Norcross, GA 30071-3669; FAX
These manifold-mounted hand pumps provide a means for manually developing and
increasing pressure in a hydraulic system. They furnish reliable power to
presses, valves, doors, safety locks, and other devices when used as a primary
pump for hydraulic systems or as a stand-by pump for emergencies. They have
suction and pressure check valves, but no release or overload valves. The pumps
eliminate the need for valve bodies and mount in standard SAE O-ring ports.
Star Hydraulics Inc., 2727 Clinton St., River Grove, IL 60171-1589; FAX (708)
The PH6 Panther diaphragm pump discharges seven to eight gallons of
non-flammable fluids per minute. It is powered by a 12V electric motor and made
from polypropylene and nylon. The PH6 Panther is equipped with a SEM-10 flow
meter that is powered by three standard AA batteries. The meter has an
anti-glare display. The pump operates at temperatures from 32 to 150F.
Ingersoll-Dresser Pump, 5599 E. Holmes Rd., Memphis, TN 38118; FAX (901)
ERG position sensor
A new range of EGR valve position sensors are targeted for use in vacuum and
electric EGR applications. The sensors, which are manufactured using a new thick
ink, are tolerant to harsh automotive environments. The thick-film ink
technology wards against fuel and ATF contamination and, since it requires no
lubricants, is safe from dust and dirt common to most automotive applications.
AB Electronic Ltd., Spring Gardens Romford, Essex RM7 9LP, England; FAX +44
219 747 6754.
The CAX filter removes dirt, oil, and water from compressed air. The filter
element, constructed from hundreds of grooved plastic discs stacked on a plastic
core, collects suspended droplets of water and oil and coalesces them into a
liquid film that continuously drains from the filter. Filter assemblies are
available for 1/2-, 3/4-, and 1-inch compressed air lines and flow rates to 400
Keller Products, Box 26, Lexington, MA 02420; FAX (781) 863-2658.
A line of special-effect masterbatches offers granite, metallic, pearlescent,
and interference effects. Standard colors for the new line include white, gray,
black, yellow, orange, brown, red, pink, blue, violet, green, gold, bronze, and
silver. Custom colors are also available. Suitable for use in PE, PP, PS, PVC,
ABS, and SAN resins, the new masterbatches come in granular, microgranular, and
powder forms. First introduced in Spain, these masterbatches have seen use in
packaging, toys, personal care, lawn-and-garden, and other products.
Clairant Masterbatches Div., 111 N. West St., Easton, MD 21601; FAX (410)
AerMetTM 310, a new double vacuum-melted alloy, offers a high
strength-to-weight ratio while retaining fracture toughness and ductility.
AerMet 310 achieves an ultimate tensile strength of 315 ksi, and offers a 1.10
mega-inch strength-to-weight ratio, or roughly 10% higher than its companion
alloy, AerMet 100. This new steel has a fracture toughness of 65 ksi inches in
the longitudinal direction. It also exhibits good ductility. Production heats of
the new steel averaged 14.5% elongation and 63.1% reduction in area.
Carpenter Technology, Box 14662, Reading, PA 19612.
ND Microspheres® 294 is a water-based, micro-encapsulated epoxy sealant for
use with threaded fasteners. Once applied, this solvent-free product remains
inert until engagement with the mating part shears the capsules open, allowing
the adhesive to cure. Microspheres 294 seals against oil, water, fuels, and a
range of motor fluids.
ND Industries, 1000 North Crooks Rd., Clawson, MI 48017.
TC-250 Thermal Cast film removes dust and other airborne particles from
curing ovens--without requiring a shut-down. Non-tacky at room temperature, the
film becomes sticky at 250F and begins to capture contaminants on its surface.
The film comes as roll stock, but is typically bonded to aluminum sheet that can
be placed in the oven or can pass through on the parts conveyor system. Coated
panels last for about 200 passes through the oven.
EPSI, 4325 North 127th St., Brookfield, WI 53005.
Dow Corning® 700 Industrial Grade Silicone Sealant, a one component silicone
rubber paste that cures at room temperature, adheres to a variety of substrates,
including glass, silicone rubber, and plastic. Once cured, the sealants
typically exhibit 225 psi tensile strength, a Shore A hardness of 20 durometer,
and a 577% elongation. It withstands temperatures from -76 to 350F. Applications
include automotive trim, appliance components, and formed-in-place gaskets for
compressors, gear boxes, and pumps. The cured sealant meets FDA requirements for
incidental food contact (Regulation CFR 177.2600) and National Sanitation
Foundation requirements for direct food contact (List 51). The product is also
recognized under UL QMFZ2.
Dow Corning, Box 994, Midland, MI 48686; FAX (517) 496-4586.
A line of silicone rubber tubing offers a Shore A hardness of 60 and has been
heat stabilized to permit reuse at temperatures up to 500F. Applications include
masking studs, pins, and other round objects too long for a silicone cap. The
tubing comes in a variety of diameters and is stocked in 50- and 100-foot
spools. Non-standard diameters and profiles are also available.
Mocap Inc., 13100 Manchester Rd., St. Louis, MO 63131.
Splash Lube Gold Compounds combine nylon with a proprietary lubricant and
additive package to provide wear performance at a lower price than other
high-temperature resins. Intended for use in thrust washers, wear sleeves,
sealing rings, and pump bushings, the material offers comparable or better wear
resistance than high-temperature resins that cost as much as one-third more.
RTP Co., 580 E. Front St., Winona, MN 55987-0439; FAX (507) 454-2041.
Fluorobase Z is a "functionalized" fluorinated polyester base resin for use
in paints and coatings that must stand up to the assault of graffiti artists.
Used in paint or coating formulations, the resin forms a surface film resistant
to painted graffiti as well as acid rain, airborne pollutants, fuel spills, and
other forms of chemical exposure.
Ausimont USA Inc., 10 Leonards Ln., Thorofare, NJ 08086.
Fastening, Joining &
Karen Auguston Field, Executive Editor
For comments on fastening, joining & assembly contact
Karen at firstname.lastname@example.org
Pick of the Issue
Fast-cycling, bench-mounted hose-crimper will produce hundreds of assemblies
per hour. Parker Phastkrimp will crimp four-spiral SAE 100R12 hose through 1.25
inches and six-spiral 100R13 through 1 inch, in both steel and stainless
fittings. Its unitized die means there is no need for skiving tools, gauges, or
Parker Hannifin, 8940 Tyler Blvd., Mentor, OH 44060; FAX (440) 366-5253.
Photonic soldering system
Semiautomatic, off-line rework, photonic soldering system is adjustable for
all types of components, from uGBAs to large QFPs, and odd-shaped and hybrid
devices. LS-100 is suitable for soldering and desoldering RF shielding and
various paste in hole and solder-paste-on-through-hole applications. System uses
a Yttrium Aluminum Garnet (YAG) laser beam, a pyrometer for program and control,
and a helium-neon laser for targeting.
Vision Inspection Technology LLC, 179 Ward Hill Ave., Haverhill, MA 01835;
FAX (978) 372-1767; www.vitechnology.com.
Code 62 hose ends
New Code 62 Fat CatTM features a fatter flange than standard SAE
Code 62 (5,000 psi working range) hose ends. It is typically used on large
Caterpillar-type heavy equipment, running with extreme high pressures. The stems
have one-piece construction, of investment-cast 316 stainless steel, and are
available in sizes from 1/2- to 2-inches in straight, 45- and 90-degree
Boston Weatherhead, Box 10016, Toledo, OH 43699-0016; FAX (419) 891-2816; www.dana.com.
Single- and double-end flexi-hinges
A new series of Flexi-HingeTM devices use crossed springs capsuled
in a cylindrical housing to provide angular travel up to 30 deg. Devices are
frictionless, self-center when unloaded, and have low hysteresis. They are
designed for applications including optical mounts, belt tensioners, linear
positioners, and sensitive measuring instruments. The devices have an O.D. range
from 0.1250 to 1.000 inches and lengths from 0.200 to 1.6 inches
Stock Drive Products, 2101 Jericho Tpk., Box 5416, New Hyde Park, NY
11042-5416; FAX (516) 326-8827; www.sdp-si.com.
Clutch couplings provide positive rotary motion control for split shafts with
in-line loads, and the BEC Series is a ball-bearing mounted rotor, allowing the
rotor assembly to rotate with the drive shaft continuously. Applications include
packaging equipment, labeling machines, computer peripherals, letter and postal
handling equipment, filling and sealing machinery and more. BEC Clutch Couplings
are available in seven sizes, with torque ranges from 1.5 to 1,800 inch-lb.
Electroid, 45 Fadem Rd., Springfield, NJ 07081; FAX (973) 467-2606; www.electroid.com.
Semiconductor manufacturing components
New, low resistivity grade (LR) semiconductor manufacturing components, made
from CVD Silicon Carbide®, is suited for wafer-handling equipment
requiring RF coupling, such as plasma etch, CVD and MOCVD. The CVD Silicon
Carbide is a solid ceramic which can be made into custom tubes and liners, up to
700 2 700 2 20mm. Material performs well up to 1500C, and is 99.9995% pure.
Morton Advanced Materials, 185 New Boston St., Woburn, MA 01801; FAX (781)
Laurie Ann Toupin, Associate Editor
For comments on computer productivity tools, contact Laurie
Maybe it was because of the Computer Technology Solutions Show, but many
companies are displaying their fall wares in splendid fashion. Because of this,
it was difficult to choose one product this time. Steve Shoaf from IBM says that
markets are changing. Companies don't address one market any more, but are
targeting the individual, so they end up targeting 50,000 markets at once. This
requires that businesses compete through innovation. "It is a digital economy
and companies need tools to help them address that," Shoaf says. The products in
this issue specifically meet that need, such as Unigraphics Version 16, my Pick
of the Issue, as well as Cimatron and Simul8. IBM and Enovia also address the
innovation engine of the production process with the ENOVIA Portfolio, an
integrated solution containing ENOVIAvpm, ENOVIApm, CATweb, and ENOVIA-DMU
Navigator. The VPM segment allows engineers to design and optimize a product and
its associated processes and resources during development. The PM segment is a
full-function product data management program. CATweb enables manufacturing
teams to share product information with the non-engineering community via the
Internet or Intranet. And lastly, DMU Navigator is for collaborative and 3D
visualization, navigation, review and simulation of all sizes of digital
Pick of the Issue
Unigraphics Version 16 marks the introduction of Predictive Engineering that
incorporates product and process knowledge into the design. The engineer will be
able to model the geometry, as well as analyze, simulate, optimize, and predict
the performance of his or her design. Process Wizards and Process Assistants
captures the company's customers' best practices and automates these to guide
the user through a set of specific tasks. MoldWizard for example, automates the
entire plastic injection mold tooling design process. Assistants, less
comprehensive than wizards, for automated manufacturing are introduced in V16
CAM. V16 also sports a new streamlined user interface, added controls for
assemblies, features and manufacturing operations.
Unigraphics Solutions Inc., 13736 Riverport Dr., Maryland Heights, MO 63043;
FAX (314) 344-5158; www.ugsolutions.com.
IntraVISION 4.1, a full-featured visualization solution, provides
enterprise-wide access to all major 2D and 3D product data. In addition to
viewing, the software allows users to markup, measure, and convert raster files,
documents, drawings, 3D CAD/CAM models, configuration data, assemblies, and part
files without requiring the native applications. IntraVISION supports more than
150 added multi-formats, including ACIS SAT, Microsoft Office, STEP, Open GL,
IGES, and more. Available as either a stand-alone or integrated component for
CAD, CAM, ERP, MES, PDM, or shop floor solutions, IntraVISION will run on all
major Windows and UNIX platforms.
Spatial Technology, 2425 55th St., Suite 100, Boulder, CO 80301; FAX (303)
Large memory workstation
The HP Visualize J7000, a 64-bit four-way symmetrical multiprocessing (SMP)
system, features a memory capacity of 8GB. The newest member of HP's
PA-8500-based HP Visualize Workstation family transforms a standalone
workstation into a powerful workgroup-capable system, improving several design
factors. The 440 MHz J7000 UNIX Workstation sports 8 PCI I/O slots, 72GB maximum
internal Ultra2 LVD SCSI hot plug disks.
Hewlett-Packard, 3000 Hanover St., Palo Alto, CA 94304; FAX (310) 535-2601;
Cimatron Ltd. (Livonia, MI) showcased Quick-Split, a new software that cuts
90% of core/cavity splitting time for tooling. Interactive, mold analysis tools
automatically generate parting lines and parting direction analysis. According
to Cimatron, what makes Quick-Split unique is its quick speed. Splitting
projects that use to take 20 to 40 hours now take minutes. Different colored 3D
parts provide a dynamic view of core and cavity, allowing users to define pull
direction, animate the part, and split the geometry. Activated from within
Cimatron software, Quick-Split separates the original model into core, cavity,
inserts and sliders. Visualization capabilities show part components in motion.
Cimatron Technologies Inc., 19500 Victor Pkwy Ste. 300, Livonia, MI 48152;
FAX (734) 432-6601; www.cimatron.com.
Digital factory software
Process Planner for computer-aided production engineering (CAPE) includes
four new engineering solutions--Body in White, Final Assembly, General Assembly,
and PowerTrain. These enable manufacturers to plan, design, and manage entire
manufacturing processes from preplanning through ramp up. Body in White targets
the automotive industry by extending the digital factory from the work cell
level up to the line level. Final Assembly, as its name suggests, manages the
final assembly process including the design and balancing of manual operations,
plant logistics, product mixes and volumes. General Assembly addresses plant
layout and logistics, human factors and product variants. The PowerTrain is a
suite of applications for creating and optimizing machining line design
Tecnomatix Technologies Ltd., 39810 Grand River Ave. Ste. 100, Novi, MI
48375; FAX (508) 229-2121; www.tecnomatix.com.
Process simulation software
SIMUL8 process management software for medium-size and enterprise-class
companies allows users to build and animate models, improve process
effectiveness, pinpoint bottlenecks, and communicate the results. SIMUL8
AssistantTM, templates, and wizards help make simulation models more
accurate and easier to build from scratch. When activated, the Assistant
monitors and checks for actions or patterns of behavior that may lead to
confusion, mistakes or incorrect analysis conclusions. A warning button flashes
when the Assistant finds something. The software runs under Windows 95, 98, and
NT 4.0 or higher. Available in single-user and multi-user versions, prices start
at $495 per seat. Plug-ins include: SIMUL8 Profit for financial reporting and an
ROI analysis tool, TimeView for historical activity reports and Gantt charts,
OPTIMIZ to adjust simulations for optimal performance via Neural Network
technology, and Transport for materials handling.
Simul8 Corp., 2214 Rock Hill Rd. Ste. 501, Herndon, VA 20170; FAX (800)
CADKEY 99 sets sail
Design software, CADKEY 99, incorporates 2D drafting, 3D wireframe, ACIS
solid modeling, surface modeling technology, photorealistic rendering. The
package offers solid body healing and tolerant edge functionality to convert
less precise imported model geometry to manufacturable CADKEY solid models. The
software also sports a one-pass IGES translator, as well as a new Parasolid file
translator for XT files. A new visual feedback tool highlights areas where
modeling operations fail.
CADKEY Corp., 33 Boston Post Rd. West, Marlborough, MA 01752; FAX (508)
CADfixTM for ANSYS improves interoperability between CAD files by
automatically cleaning up CAD models and preparing them for ANSYS design
analysis. With this software, CAD geometry can be healed and repaired so that
the analysis process runs smoothly. The product works with CATIA, I-DEAS,
Pro/ENGINEER, and Unigraphics. Once design work is complete, simply save the
model in one of the geometry standards such as IGES or STEP, launch CADfix, and
the geometry will be prepared for simulation processes.
ANSYS Inc., Southpointe 275 Technology Dr., Canonsburg, PA 15317; www.ansys.com.
View Pro/E models
Actify's 3D View, a native 3D CAD model viewer, adds support for Parametric
Technology Corp.'s Pro/ENGINEER CAD system. Non-CAD users can view and share
native Pro/ENGINEER parts and assemblies without access to a Pro/E workstation.
They can measure and markup CAD files without a CAD system, server, or
translator. 3D View provides access to other CAD vendors as well including
CATIA, I-DEAS Web Access, SolidWorks, Solid Edge, AutoCAD, Mechanical Desktop,
Actify, 486 Clipper St., San Francisco, CA 94114; FAX 415-847-6506; www.actify.com.
Rick DeMeis, Senior Editor
For comments on electrical/electronics, contact Rick at email@example.com
Design News editors follow industry trends in many ways.
Besides making plant visits and attending trade shows, we host many OEM
suppliers who come to our offices to highlight and demonstrate their latest
products, services, and applications. In the area of test and measurement
equipment, and particularly oscilloscope technology, one only has to have read
our last few issues to see that the industry's major players have been parading
through our cubicles at a nearly breakneck pace--almost all of them have
simultaneously introduced new, higher speed and greater memory models, as well
as features such as voice control.
Under shorter design cycles, design test engineers must validate devices with
ever-tighter circuit densities and higher bandwidth operations. But to
paraphrase Lord Kelvin, "If we can't measure it, we can't know it." Fortunately,
vendors are making it easier for designers to determine how well their latest
demanding electronic designs and concepts perform, either to validate the
components or adjust characteristics to meet requirements.
The very microchip- and processor-equipped devices (plus software) such test
gear is measuring, are the sources, in turn, of equipment improvements. Not only
is the basic electronic performance being enhanced, but also the physical
versatility of the test equipment itself. Lower-power flat panel displays are
cutting the bulk, weight, and power consumption of oscilloscopes. Thus, more
powerful machines are becoming more portable, and the economies of scale are
increasing performance per dollar spent.
If you're a design test engineer and haven't looked up from your oscilloscope
in the last few weeks, take a glance around to see what manufacturers are now
offering you to get your projects done "better, faster, and cheaper."
Pick of the Issue
Handheld, high-speed scopes
First out of the gate this month in the oscilloscope sweepstakes is a
handheld unit for designers and others doing field or remote site testing,
featuring the data storage and analysis capabilities of many desktop units. The
Fluke ScopeMeter® 190 Series battery-powered oscilloscopes offer up
to 200 MHz bandwidth and 2.5 GS amples/sec real-time sampling using separate
digitizers on both isolated inputs. The series features a memory of 27,500 data
points per input for long duration, high-resolution recording. A
Connect-and-ViewTM function recognizes signal patterns to set up
correct, automatic triggering for displaying a signal of interest, all without
the user needing to reconfigure the instrument. And any signal changes are
recognized and settings adjusted for a stable display. In normal mode, the last
hundred screens are "memorized," so that using a replay button allows scrolling
back in time to catch any anomaly as fast as 50 nsec. A "baby-sit" mode can
capture up to 100 predefined glitches or signal anomalies. A NiMH battery
provides four hours of operation.
Fluke, P.O. Box 9090, Everett, WA 98206; FAX (425) 356-5116; www.fluke.com.
Back-lit panel meters
The 10 Series of snap-in, green LED back-lit panel meters are sub-miniature
dc voltmeters and a 4 to 20 mA loop-powered ammeter. Digit heights range from
0.22 to 0.43 inch. Voltmeters operate from a nine volt supply and feature
auto-polarity and zero, 150A current operation, and 200 mV full-scale reading.
The DPM 342 ammeter has a low voltage drop of 5.6V, calibration potentiometers
for offset and span, screw terminal connections, and loop powered LED
back-lighting. All include an integral snap-in bezel and a suitable PCB socket
for instrument connection.
Lascar Electronics, Box 8204, Savannah, GA 31412; FAX (912) 234-2049; www.lascarelectronics.com.
Temp monitor, fan controller
THMC50 is a local/remote temperature monitor with two 3.3V supply voltage
supervisor circuits and an 8-bit, 0 to 2.5V digital-to-analog converter. The
device is designed for temperature sensing and fan control using a two-wire
SMBus serial interface. The THMC50 provides maskable interrupts for under/over
temperature condition with default or user adjustable limit values. Applications
include personal computers, and telecom and network equipment.
Texas Instruments, P.O. Box 655303, Dallas, TX 75265; www.mkt.sc.ti.com.
Model 267MR is a low differential pressure transducer designed for measuring
pressure and flow of air and non-conducting gases. Up to six different pressure
ranges (bi- and unidirectional) are available in each transducer, reducing
inventory from 20 to four. Ranges include 0.1 to 30 inch W.C. full scale. Output
is field configurable to 0 to 5 or 0 to 10V dc, and a 4 to 20 mA output is also
available. Applications include medical instrumentation, variable air volume and
fan control, and oven pressurization.
Setra Systems Inc., 159 Swanson Rd., Mail Stop 14-26, Boxborough, MA 01719;
FAX 978-264-0292; www.setra.com.
S-Series of MOSFET RF power transistors operate at 90 and 120W, and up to
more than 500 MHz. Designed to exhibit a low Crss, says the company,
applications include both narrow and wideband data and voice communications.
Polyfet RF Devices, 1110 Avenida Acaso, Camarillo, CA 93012; FAX (805)
Lightpipes direct light from PCB-mounted LEDs to the front of the modjack to
indicate system activity. The customer-supplied surface-mount LEDs, in
combination with the lightpipes, reduce EMI/RFI noise by 50% compared to a
modular jack with integral LEDs, says the company. Replacement cost is also
reduced because there are no LEDs on the jacks to fail. The modjacks have a plug
latch on the top for easy demating and they are available in shielded and
unshielded versions for both RJ11 and RJ45 styles.
Molex, 2222 Wellington Ct., Lisle, IL 60532; FAX (630) 969-1352; www.molex.com.
The Programmable Field Controller for the WAGO-I/O-SYSTEM allows users to
store and execute programs locally and still communicate with the network.
Program execution continues, even if the field bus connection is lost. Flash
memory is 32k. An IEC-1131-compatible tool programs the controller so that a
user can download simple logic control into each I/O node.
Wago, 9085 N. Deerbrook Trail, Brown Deer, WI 53223; FAX (414) 354-1268; www.wago.com.
The SLB Series subminiature load cells (Load Buttons) are for compression
only applications where space is limited. Heat treated 17-4ph stainless steel
forms the sensors and the sensing element features bonded foil strain gages for
a full scale output of 2 mV/V. Accuracies are 0.25% nonlinearity and hysteresis,
and 0.1% or better nonrepeatability.
Transducer Techniques, 43178 Business Park Dr., Temecula, CA 92590; FAX (909)
Catalyst temperature sensor
Catalyst temperature sensor allows closed-loop temperature control as part of
a system designed to reduce emissions and offer more robust catalyst monitoring,
according to the company. It says the closed-loop feedback system approach
results in minimized cold-start tailpipe HC, CO, and NOx emissions during the
critical first 15-30 seconds before catalyst lightoff.
Heraeus Sensor-Nite, 14165 Fenton Rd., Suite 102, Fenton, MI 48430; FAX (810)
Test, Measurement, & Control
Jean Young Gonzalez Western Regional Editor
For comments on test, measurement, & control, contact
Jean at firstname.lastname@example.org
Pick of the Issue
Whole surface wafer measurement tool
Nanomapper uses low-noise interfermonetry to map whole semiconductor wafer
surfaces in three dimensions with sub-nanometer precision. The unit is designed
for analysis of 200- and 300-mm wafer sizes and provides surface height mapping
for 0.18 micron technology. NanoMapper meets 0.10 micron design rule
specifications. Surface features measured include irregularities from crystal
pulling, sawing, grinding or etching, polishing, and epitaxial growth. The unit
may be used to control chemical/mechanical polishing processes. Output both
visualizes and quantifies the surface, including irregularities.
ADE Phase Shift, 3470 East Universal Way, Tucson, AZ 85706; FAX (520)
Hall effect sensor
ATS660LSB is a zero-speed, Hall effect adaptive gear-tooth sensor solution
for transmission applications. This digital differential sensor incorporates
self-calibration circuitry that nulls out the effects of installation air gap,
ambient temperature, and magnet offsets to provide timing accuracy over large
operating air gaps for target pitches varying from less than 0.5 to more than
1.2 teeth per diametric millimeter. The single-chip sensing IC features high
vibration immunity and precise duty cycle, with a small mechanical size of 9-mm
diameter by 7mm length.
Allegro, 115 Northeast Cutoff, Worcester, MA 01615; FAX (508) 853-7861; www.allegromicro.com .
Solenoid control valves
Series 6000 solenoid control valves are built for long cycle life--typically
10 times longer than conventional solenoid valves. These valves use 360-degree,
positionable slip-over coils that are completely isolated from fluid media; dual
high-quality FKM elastomer seals, and UL plug-on connectors. Series 6000
solenoid valves are available in 2/2-way and 3/2-way versions with direct-acting
or internally piloted operation. Choice of stainless steel or brass housing is
offered. Operating pressures range up to 725 psi with media temperature
capabilities of 14-215F. Port sizes range from 1/8- to 2-inch. NPT and orifices
are from 3/64 to 21/2 inches.
Burkert Contramatic, 2602 McGaw Ave., Irvine, CA 92614; FAX (949) 223-3198.
Gigabit transformer modules
H5008 and H5009 single-port gigabit modules fit directly behind a standard
RJ-45 connector to consume less board space and provide better electrical
performance. These small 1000Base-T gigabit modules are designed for routers,
switches, repeaters, servers, and network interface cards. The H5008 and H5009
are fabricated in a 24-pin open-header package.
Pulse, 12220 World Trade Dr., San Diego, CA 92128; FAX (858) 674-8262; www.pulseeng.com
DPI515 pressure controller enables quick and easy testing of pressure gauges,
transducers, and switches. Pressure ranges are available up to 3,000 psi gauge
or absolute, offering precision up to 0.01% full scale. Dual range versions
provide fully independent channels, enabling any two pressure ranges to be
combined. An optional barometric reference enables both gauge and absolute
operation in addition to reading ambient pressure. DPI515 digital control system
features fast response time, no overshoot, and a setpoint stability better than
0.001% (10 ppm) of full-scale pressure. The unit is fully programmable for
high-speed operation, with a long-term stability of 0.03% of reading per annum.
Druck Inc., 4 Dunham Dr., New Fairfield, CT 06812; FAX (203) 746-2494; www.druckinc.com.
Data acquisition system
Integra Series Model 2700 Multimeter/Data Acquisition System is a half-rack
sized alternative to dataloggers, plug-in cards and custom assembled test and
measurement systems. Model 2700 can perform up to 80 differential channels of
measurement and control. Built-in mainframe signal conditioning can handle
inputs up to 1,000V (300V with plug-in modules). Two card slots accept a variety
of input modules with the flexibility to vary channel count from 20 to 80, apply
a stimulus to DUTs, route signals, control system components, and make
measurements with 13 different test functions. The units feature DMM-like
pushbutton controls and front/read inputs. Features include programmable scan
lists, a 50,000-point memory buffer, and built-in scaling and digital I/O.
Communication to a PC can be through either a GPIB or RS-232 interface. Model
2700 ships with Windows-like ActiveX startup software. Applications range from
product development and process monitoring to production testing.
Keithley Instruments, 28775 Aurora Rd., Cleveland, OH 44139; FAX (216)
PIC16C717, PIC16C770, and PIC16C771 family of 8-bit microcontrollers
integrates advanced analog capabilities into a small 20-pin package. The chips
pack a high-resolution 10- or 12-bit analog-to-digital converter, enhanced
capture/compare/pulse-width modulation, and on-chip voltage reference in a small
footprint package. PIC16C717 and PIC16C770 feature 2,048 2 14 bits of OTP
program memory, and the PIC16C771 features 4,096 2 14 bits of OTP program
memory. All three devices contain 256 bytes of user RAM. The devices have 5 MIPS
performance at 20 MHz, 16 I/O pins, 4-MHz internal clock oscillator,
high-performance communication capability via I2C/SPI interfaces, one 16-bit
timer, two 8-bit timers, a watchdog timer, and a wide 2.5 to 5.5 operating
range. The level of resolution provided by these devices gives designers the
ability to discriminate smaller signal changes--important when interfacing with
a variety of sensors.
Microchip Technology, 2355 West Chandler Blvd., Chandler, AZ 85224; FAX (602)