T-Series PLCs from Toshiba now have low-cost operator interface stations (OIS) that need no wiring or programming. Available in two models--OIS 10 and OIS 15--the interfaces have cables that plug directly into the PLC's RS232 port, from which they draw their power. All messages and other actions are saved in the PLC or register memory, eliminating the need for programming. The OIS 10 displays two lines of up to 16 characters per line, while the OIS 15 displays four lines of up to 16 characters per line. With either, messages are limited in length only by the available PLC memory and can consist of flashing alphanumeric alarms, embedded register values, bar graphs, or other information. The OIS 10 has six user-definable keys and two user-definable LEDs; the OIS 15 offers eight keys and four LEDs. Toshiba International, Product Code 4302.
Are they robots or androids? We're not exactly sure. Each talking, gesturing Geminoid looks exactly like a real individual, starting with their creator, professor Hiroshi Ishiguro of Osaka University in Japan.
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This discussion will examine what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.