T-Series PLCs from Toshiba now have low-cost operator interface stations (OIS) that need no wiring or programming. Available in two models--OIS 10 and OIS 15--the interfaces have cables that plug directly into the PLC's RS232 port, from which they draw their power. All messages and other actions are saved in the PLC or register memory, eliminating the need for programming. The OIS 10 displays two lines of up to 16 characters per line, while the OIS 15 displays four lines of up to 16 characters per line. With either, messages are limited in length only by the available PLC memory and can consist of flashing alphanumeric alarms, embedded register values, bar graphs, or other information. The OIS 10 has six user-definable keys and two user-definable LEDs; the OIS 15 offers eight keys and four LEDs. Toshiba International, Product Code 4302.
By experimenting with the photovoltaic reaction in solar cells, researchers at MIT have made a breakthrough in energy efficiency that significantly pushes the boundaries of current commercial cells on the market.
In a world that's going green, industrial operations have a problem: Their processes involve materials that are potentially toxic, flammable, corrosive, or reactive. If improperly managed, this can precipitate dangerous health and environmental consequences.
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is