Today's electronic equipment utilizes circuit cards with minimal clearances. Planar E Cores meet the requirements of emerging low-profile assemblies. This low-profile shape and ease of construction offer fast, error-free winding, excellent heat sinking properties, and efficient repeatable performance at low cost.
These miniature transformer devices can be inserted directly into the circuit board without compromising space. The cores are available in a variety of sizes and specifications.
TT/MMG, 126 Pennsylvania Ave., Paterson, NJ 07503, FAX (201) 245-1172.
Company can provide low-cost shims for applications requiring standard materials and thicknesses. Recent investments to stock, more raw materials, and new equipment can reduce both cost and lead time, and offer a wider range of standard shims. Standard materials in stainless steel, brass, laminated materials, high- and low-carbon steel, and aluminum are available. Thicknesses range from 0.001 to 0.250 inch. Standard shims are made to customer specifications using in-stock materials and thicknesses. Standard shims are used for industrial machinery and equipment and other applications where tight tolerances are critical to performance.
Spirol Int'l Corp., 321 Remington Rd., Cuyahoga Falls, OH 44222, FAX (330) 920-3659.
The CIS3 read/write identification system permits contact-free identification of tools, workpiece carriers, pallets, and vehicles in production and all other logistic areas. This low-cost system requires no batteries in the data carriers due to inductive energy and data transmission. Features include simple installation of reading head through 24V parallel interface, easy integration into each fieldbus system, a compact head design, no external evaluation device required, 0 to 12 mm reading distance, and up to 30 m/min dynamic reading possible.
Euchner USA Inc., 300 Roundhill Dr., Unit 4, Rockaway, NJ 07866, FAX (201) 586-1590.
M5970 liquid level switch is a miniature side-mounted model that is constructed of 316 stainless-steel. The switch extends less than three inches into the tank and is suitable for limited-switch applications with high-temperature or corrosive conditions. The M5970 is rated at 30W, has a float specific gravity of 0.7, and is rated for temperatures up to 200C and pressures up to 100 psig.
Madison Co., 27 Business Park Dr., Branford, CT 06405, FAX (203) 481-5036.
The RTU-164K data logger/remote controller modules record and report data from standard analog and digital remote site sensors to a PC via a choice of radio links, cellular transmitters, phone lines, or local RS-232. A single-host module can be used with additional remote modules to monitor and control larger installations and multiple sites. The system is scalable to users' needs. The industrial-grade module can operate for several years without battery charge.
Synetcom Digital Inc., 1426 Aviation Blvd., Suite 203, Redondo Beach, CA 90278, FAX (310) 372-2331.
ORIONTM motion controllers offer the 586/133 MHz processor or a selection of 80486 microprocessors, 4 Mbytes of RAM, a 256K external cache, a keyboard connector, two pc card slots, and up to seven 16-bit ISA expansion slots. Built on the IBM-PC architecture, ORION is a fully integrated motion controller offering DSP-based servomotor control and convenient interfaces to high-speed sensors, programmable limit switches, machine I/O, human-machine interfaces, and popular factory networking options.
Ormec, 19 Linden Park, Rochester, NY 14625, FAX (716) 385-5999.
Push-EZ male "F" coaxial cable connector features Low Insertion Force Termination technology (LIFTTM). It is the employment of LIFT termination that enables the Push-EZ to securely hold stripped RG59 cables without the use of tools. The connector is for TV/CATV applications where permanent and reliable coaxial cable connections are required. The male "F" connector provides connections as securely as a crimp, but with the ease of a twist-on. To attach the connector to the coaxial cable, the user needs to strip the cable jacket and insert cable into connector.
Bomar Interconnect Products Inc., 1850 Rt. 46 E., Ledgewood, NJ 07852, FAX (201) 347-2111.
The Lifeline 4 safety switch combines both rope- and button-operated emergency stop functions in a single unit. Installation can occur along or around exposed conveyors and other awkwardly configured machinery that requires an emergency stop to be instantly accessible. Whenever the rope is pulled in any direction, or the emergency button is activated, the Lifeline 4 immediately sends a stop signal to the guarded machine. A positive-mode mechanism ensures the contacts are immediately latched open on actuation and can only be reset by turning the reset knob. This unit is housed in a die-cast alloy/stainless-steel weatherproof case.
Scientific Technologies Inc., 6550 Dumbarton Circle, Fremont, CA 94555, FAX (510) 744-1442.
SMT LEDs with internal series resistors save 40% of required pc-board space compared to LEDs with separate resistors. Designed specifically for LED construction, the SMT package contains a parabolic reflector. This reflector increases mcd ratings from 10 to 80. Viewing angle has also been increased from 90 to 120 degrees. The LEDs will perform at 2-20mA with a typical forward voltage of 2.0V. Tape and reel packaging is standard.
Gilway Technical Lamp, 800 W. Cummings Park, Woburn, MA 01801, FAX (617) 938-5867.
Series 285B LVDT gage heads provide accuracy to OEM engineers for applications such as precision gaging, profile measurements, and quality assurance. Advantages include an inherently infinite output resolution, better than ±0.25% full-scale non-linearity at optimum frequency, and stable output over the operating temperature range. The exterior housing is all stainless steel which provides shielding against magnetic fields and added protection over wide temperature ranges.
Transicoil Inc., Box 9011, Valley Forge, PA 19485, FAX (610) 539-3400.
The MPRL air cylinder incorporates a powerful piston rod locking device that enables the piston rod and locks it in position. The locking device is of the air/spring activated type and is integrated into the front cover of the cylinder. In the absence of air signal pressure, full holding force is applied to the piston rod. When air is present, 60 psi, the locking device is released. The unit offers construction that is easy to clean, well sealed, and is splash proof.
Parker Hannifin Corp., Motion & Control, 500 S. Wolf Rd., Des Plaines, IL 60016.
The SureWeld line of plastic welders feature rectangular support columns, which eliminate deflection and deliver uniform bonding over the entire weldment. Each of the 20, 35, and 70 kHz units provide repeatable accuracy. Ultrasonic technology utilizes vibrational energy which is introduced at the interface of the plastic parts being joined. This causes the plastic material to soften in a fraction of a second.
Sonobond Ultrasonics, 887 S. Matlack St., West Chester, PA 19382, FAX (610) 692-0674.
Bore Micro Model cylinders are for limited- space applications such as clamping and fixturing. These 3/4-inch bore cylinders are available in both spring-return and double-acting models. The spring return series can be furnished in 1/2-, 1-, 2-, and 3-inch strokes. The double acting series is available in 1/2-, 1-, 2-, 3-, and 4-inch strokes. The new cylinders offer heavy- duty naval-brass-construction for long service life and are fully serviceable in the field. C1141 ground and polished plated steel shafts are standard, but stainless shafts are available for specialized applications.
Air-Mite Devices Inc., 4739 W. Montrose Ave., Chicago, IL 60641, FAX (773) 286-4703.
Titanium Aluminum Nitride (TiAIN) is a temary alloy coating that withstands high- speed cutting of difficult-to-machine materials. TiAIN's thermal stability and high oxidation resistance protects the substrate material at elevated cutting temperatures even when cutting dry. It is very ductile making it suitable for interrupted cuts, and has high hardness, exhibiting excellent wear and erosion resistance when machining alloy steels, tool steels, cast iron, and high-nickel materials.
National Coating Technology, 3625 Woodhead Dr., Northbrook, Il 60062.
The ACR2000 is a PC-Bus or stand-alone motion controller (SMT). This 1/2 size SMT card can control up to 4 servo or stepper axes of motion. Features include a 32/64-bit floating- point DSP at 50 MHz, a pre-emptive multi-tasker, a 50-microsecond servo update rate, ladder-logic PLC, a programmable limit switch, and segmented electronic CAM.
Acroloop Motion Control Systems Inc., 7801 Park Dr., Chanhassen, MN 55317.
ABH350 automation-duty, NEMA 34 frame compact motors are for high torque, velocity, and/or positioning applications. An anti-cog magnetic design offers smooth low-speed operation. Peak torques exist at up to 220 lb-inch and continuous torque to 44 lb-inch, with speeds to 6,000 rpm.
QMC Technologies Inc., 14700 Martin Dr., Eden Prairie, MN 55433.
Inductive proximity sensors detect metallic objects that enter their detection zone. Features include no moving parts or contacts and full encapsulation. The units function without wear providing low maintenance; reliability; and protection against vibration, shock, dust, dirt, and humidity. This line is suitable for harsh environments.
SICK Optic-Electronic Inc., 7694 Golden Triangle Dr., Eden Prairie, MN 55344, FAX (612) 941-9287.
CTA10/ECODRIVE digital rollfeed control integrates single-axis motion control, amplifier, power supply, operator terminal, and dedicated I/O into a single, compact control system. This control eliminates the need for an additional PLC, external pushbuttons, relays, and switches--significantly reducing the amount of necessary wiring. Connection can be made directly to 230 or 480V ac power lines, further reducing costs by eliminating the need for added transformers and soft-start circuitry.
Indramat, 5150 Prairie Stone Pkwy., Hoffman Estates, IL 60192, FAX (847) 645-6201.
Tool holders are for high-speed machining on automotive-type transfer lines, special multi-station dial index machines, drilling and tapping machines, swing arm tapping machines, and multiple spindle drill and tap heads. Holders are also suitable for CNC vertical and horizontal machining centers and CNC turning centers.
BILZ/RMT Tool Co., 2035 North 17th Ave., Melrose Park, IL 60160, FAX (800) 937-7752.
SVA10 and SCA20 Series of solenoid valves are constructed mainly of plastic. Features include a compact, lightweight design, and high flow capacity. The SVA10 drives 3-inch bore cylinders, is 10 mm wide, and has a Cv of 0.4. Nine- or 25-pin D-sub connectors are available. The SVA20 is 16 mm wide with a Cv of 0.4 and drives a 5.5-inch bore cylinder. Nine- or 25-pin D-sub connectors or 26- or 40-pin ribbon-cable connectors are available. An increased flow capacity makes the units suitable for applications ranging from machine control to air logic systems.
Pisco USA Inc., 2228 Landmeier Rd., Elk Grove Village, IL 60007, FAX (847) 427-1317.
The 25201 pressure-compensated priority flow divider package is for applications requiring electric remote flow control. The Series uses either MFC-10 or MFC-16 as the adjusting element for priority flow control to a primary function with excess flow bypassed either downstream to tank or used to operate another function. Relief valve and solenoid dump valve options are available with the package. Standard on 25201 packages is the body, pressure-compensating divider element, and a motorized flow control. The MFC-10 accommodates flows from 0 to 15 gpm at working pressures to 3,000 psi. The MFC-16 is available in three configurations from 0 to 20, 0 to 33, or 0 to 50 gpm flow rates. Manual override is standard on both models.
Source Fluid Power Inc., 331 Lake Hazeltine Dr., Chaska, MN 55318, FAX (612) 448-3392.
QLINETM enclosures provide protection for delicate instrumentation. Enclosures are rated UL Type 4X and provide protection in wet, dusty, or corrosive environments. They are available with clear or opaque covers in more than 150 different models. Models include enclosures with flexible PC-card mounting, adjustable panel depths, rear-mount covers, and tamper resistant designs.
Hoffman Engineering, 900 Ehlen Dr., Anoka, MN, 55303, FAX (612) 942-6940.
Model 103 planetary speed reducer has a 15,000 inch-lb rotational torque rating. This reducer is for swing-drive applications with tapered roller bearings for increased side-load capability. An integral output pinion and a spring-applied hydraulic-released disc brake are available. Gear ratios are available from 4:18 through 64:1. Also available are SAE hydraulic motor and shaft mounts.
Gear Products Inc., 1111 N. 161 E. Ave., Tulsa, OK 74116, FAX (918) 234-3455.
A 5.5-cubic-inch piston motor has a standard tail shaft for mounting an incremental encoder. The motor comes standard with a SAE B shaft and mounting. An alternative to the orbit motor, this motor delivers up to 3,455 lb-inch torque at 4,350 psi with a speed range from 1 to 1,000 rpm. The addition of an incremental optical encoder and servo or proportional directional control package will enable the system engineer to precisely control speed, position, and stall at full load. Applications include test equipment; machine tools; process control; agricultural machinery; robotics; and food-processing, textile and paper equipment.
Nutron Motor Co. Inc., 102 Dow Hwy., Eliot, ME 03903, FAX (207) 439-8611.
Plug buttons are hole enclosures. They incorporate screens, lenses, inserts, embossing, seals, and a number of prong designs in sizes ranging from 0.125 inch to 3.00 inches in diameter. Materials include steel, stainless, brass, aluminum, plastic, rubber, and others. Plug buttons can be used with vents, drains, indicator lights, tamper-proof closures, and more. These enclosures serve the automotive, electronics, electrical, and other industries of both industrial and consumer products.
National-Carr, Rolex Co., 385 Hillside Ave., Hillside, NJ 07205, FAX (201) 926-5626.
Die-cut bug strips are available. A pressure-sensitive adhesive in the perforated or knitted mesh material keeps unwanted insects or debris out of the electronic enclosure while allowing outside-air ventilation. Made from a clear polyester with high-strength acrylic adhesive, polycarbonate, polyethylene, and polypropylene, these strips can replace a welded-in-place wire-mesh screen or mechanically fastened screen assembly. Tolerances stand at ±0.031 inch. Applications include use with outdoor electronics cabinets.
PressCut Industries, 2828 Nagle St., Dallas, TX 75220, FAX (214) 350-4713.
SV51 Series direct-acting, two-way, normally closed diaphragm valves offer a flexible diaphragm to isolate the valve's metallic parts from the fluid being handled. Featuring bubble-tight shutoff, the Series is made of virgin TFE Teflon for maximum inertness and compatibility with a wide range of fluids. A right-angle body increases flow per orifice size and is mountable in any position. Model SC51 is suitable for light industrial applications, both new and retrofit, and is available in four orifice sizes.
Valcor Engineering Corp., 2 Lawrence Rd., Springfield, NJ 07801, FAX (201) 467-8382.
Needle valves are for controlled cylinder air flow. Meter-in and meter-out capabilities allow speed control in single, reverse, and short-stroke-length double-acting cylinders. Features include a chrome-plated, zinc die-cast banjo; high-strength anodized-aluminum-alloy stem; stainless-steel adjusting needle and gripping teeth; and quick-connect fitting for tubing. A recessed needle is available for more tamper-proof control. A knurled knob offers easier control. Valves are designed to fit 10-32, 1/8, 1/4, and 3/8 ports.
Bimba Mfg. Co., Box 68, Monee, IL 60449, FAX (708) 534-5767.
Scrap drum magnets
Designed for high-volume, heavy-duty applications, these scrap drum magnets offer electro or permanent magnetic circuits for maximum performance. The all-electro agitator-type scrap drum utilizes a deep field rectangular core pickup magnet to reach out and grab ferrous material. Then, a second rectangular core agitator magnet flips, or agitates the ferrous material--removing any loose, mud, paper, fluff, and trash. The all-permanent-type scrap drum uses a deep field radial pickup magnet and pole shoes to convey or transfer the ferrous material around the drum shell to the discharge area.
Eriez Magnetics, Box 10608, Erie, PA 16514.
Carbon-steel ball valves provide shut-off on general industrial and hydraulic lines. Available in 1/4- to 2-inch sizes, these valves are pressure rated to 2,000 psi, with a working temperature range from -20 to 450F. All valves are rated to 150 psi in saturated-steam service. The 1/4- and 3/8-inch sizes come with full ports for maximum flow, and 1/2- to 2-inch sizes have standard ports. An optional stainless-steel ball and stem ensures optimal fluid compatibility.
Parker Hannifin Corp., Fluid Connectors Group, 17325 Euclid Ave., Cleveland, OH 44112.
The Clean-Act® line of low-emissions pneumatic cylinders are for use in semiconductor, pharmaceutical, electronics, biomedical, high vacuum, food-contact, laboratory, and instrument applications. These cylinders are available in 3/4- through 3-inch bores and stroke sizes to 4 inches. Double-acting, the cylinders feature an extra set of rod seals with four sealing points and a vacuum port positioned between the two multi-lobed seals.
Compact Air Products Inc., Box 499, Westminster, SC 29693, FAX (864) 647-9574.
SPW-1000 Series of 2.5 VA pc-board power transformers are UL, CSA, IEC, and VDE approved. Features include shrouded primaries and 3-flange bobbins. No electrostatic shield is required. Each primary and secondary has two separate windings. The Hipot rating for the unit is 4,500 VRMS dielectric strength.
Prem Magnetics Inc., 3521 N. Chapel Hill Rd., McHenry, IL 60050, FAX (815) 385-8578.
Model UPF flow-through pressure transducer is made from a single piece of 316L VAR stainless steel, making it largely immune to stresses from vibration or torque applied to the transducer body during installation. Applications include use with demanding UHP applications in the semiconductor industry.
Sensotec Inc., 1200 Chesapeake Ave., Columbus, OH 43212, FAX (614) 486-0506.
Uni-Foam cleanable air filters provide protection for electronics, computer, telecommunications, medical, and general-purpose equipment applications. They are custom-designed; certain filter models are specifically designed for limited-space electronics applications. The filters are listed for UL 900 Class 2 applications. The polyurethane foam media has an open-cell structure that is available in a wide range of pore sizes. The random arrangement of strands and pores gives the filter media strong dust-holding capacity.
Universal Air Filter Co., 1624 Sauget Industrial Pkwy., Sauget, IL 62206, FAX (618) 271-7300.
Intended for both pressure and vacuum service the low-noise ACOUSTICAIRTM rotary blowers range in capacity up to 1,900 CFM, with pressures to 15 psig and with vacuums to 15 inches Hg. Optional equipment enables blowers to operate in high temperatures or in high-performance applications. For instance, optional lube systems and optional oil cooling systems can be provided for continuous service applications.
Tuthill Corp., M-D Pneumatics Div., Box 2877, Springfield, MO 65801.
A family of 750W switching power supplies features 0.99 power factor correction and the seven outputs required by VXIbus standards. The Series is designated as FXID-YY and is derived from the Moduflex® family of switchers. Dimensions are 11.63 × 5.20 × 2.63 inches. The main output provides 5V at 60A with auxiliaries that offer 2V at 12A, 5V at 12A, 12V at 8A, and 24V at 4A. All outputs are floating and auxiliaries individually regulated with high-speed mag amps. Options for this Series include individual current limit with wireless droop-current sharing, a VXI power-monitor with power- fail and system reset signals, enhanced modules for star-point current share, and dc output good logic signals.
Deltron Inc., Box 1369, North Wales, PA 19454, FAX (215) 699-2310.
The brushless Plus Series of two-wire brushless dc motors have only two connecting wires and provide full four-quadrant servo performance when connected to a standard, single "H" bridge servo amplifier, eliminating the need for more costly conventional three-phase brushless servo amplifiers. With brushless plus motors there is no longer the need to change the drive electronics or the cabling when changing from dc brush to longer-life, higher-reliability dc brushless designs.
MFM Technology Inc., 200 13th Ave., Ronkonkoma, NY 11779, FAX (516) 467-5176.
40-900 Series mini proportional valves are for pneumatic pressure control. The valves are easily interfaced to any 0-10V dc or 4-20 mA control circuit and suitable for pressures to 230 psi. The unique design offers manifold mounting and low electrical power consumption. Applications include control of grippers, miniature cylinders, remote regulators, and vacuum ejectors.
Herion USA Inc., 176 Thorn Hill Rd., Warrendale, PA 15086, FAX (412) 776-0310.
A miniature brush-type dc motor is offered as part of the Big Inch® line of gearmotors. The dc Big Inch combines a small dc-brush motor and an integral geartrain into a 1-inch diameter package, which delivers durability. This compact gearmotor produces torque up to 25 oz-inch and output speeds as low as 10 rpm, depending upon the gear ratios used. Available in 8 and 12V versions, the motor is suitable for any application with a dc power source available. Typical uses include printing equipment, valve control, computer peripherals, automotive controls, medical instruments, business machines, clocks, and timers.
Haydon Switch & Instrument Inc., 1500 Meriden Rd., Waterbury, CT 06705, FAX (203) 756-8724.
A size 34 ac induction motor features a fully integrated gearhead. This configuration achieves higher torque at lower speeds than normally possible with the ac motor alone. Furnished in die-cast housing, the motor features grease-lubricated gearheads and is equipped with either sleeve or ball bearings to ensure maintenance-free operation and long life. Designed to meet MIL-Spec requirements, the single- or three-phase motor is reversible operating at variable speed with inverter drives. Rated torque for the size 34 is up to 87 lb-inch. Thermally protected, the single- or dual-voltage motor can be adapted for nonstandard voltages and frequencies.
Eastern Air Devices Inc., 1 Progress Dr., Dover, NH 03820, FAX (603) 742-9080.
Plastic fan guards offer maximum airflow while maintaining compliance to safety regulations. Each guard is made from UL-listed material and offers a cost saving comparison with wire-form fan guards. Four new styles from 40 to 120 mm are available.
Qualtek Electronics Corp., 7675 Jenther Dr., Mentor, OH 44060, FAX (216) 951-7252.
FYX 600 Series of magnetic-resonance topology units offer the maximum power density with a low profile. The first in the Series, the 60W unit, measures only 2.75 × 5.00 × 1.18 inches, yet offers 3.68W/pci, four outputs, universal input, and power factor correction. Applications for the FYX include datacom, telecom, industrial controls, computer peripherals, and office equipment.
Shindengen America Inc., 5999 New Wilke Rd., Suite 406, Rolling Meadows, IL 60008, FAX (847) 593-8597.
PROTOFLEX line of highly flexible electrical cables offer extended life in process lines, material-handling facilities, and assembly lines. The cable line can operate at the higher speeds and duty cycles associated with state-of-the-art manufacturing equipment, including cable track, robotic, machine-tool, and servo applications. PROTOFLEX PVC and PU jacketed cabling is resistant to oils, chemicals, and mechanical abrasion. Shielded cables provide protection from electromagnetic interference.
Siemens Energy & Automation Inc., Power Cables, 3333 Old Milton Pkwy., Alpharetta, GA 30202, FAX (770) 740-2530.
MoldDesignTM generates mold designs straight from 3-D solid model parts, automating the process of designing plastic and high-pressure aluminum injection molds. MoldDesign frees designers from the tedious work in mold design, including creating mold plates and components as well as detailing slots and holes. MoldDesign uses rules-based technology and parametric libraries to generate fully detailed 3-D solid models of the mold from the original part. The streamlined workflow and exchange of information boosts the productivity of the mold designer, increases part quality, and reduces time to market.
Bentley Systems Inc., 690 Pennsylvania Dr., Exton, PA 19341, FAX (610) 458-1060.
FDM2000 rapid prototyping system incorporates the patented fused-deposition modeling technology. The system can build models up to 254 × 254 × 254 mm, within ±0.127 mm accuracy, and in a variety of materials including ABS, medical-grade ABS, and investment casting wax. With ABS, users can create functional prototypes for testing and final design verification. The system operates on Hewlett Packard, Silicon Graphics, Sun Microsystems, and Windows NT workstations.
Stratasys Inc., 14950 Martin Dr., Eden Prairie, MN 55344, FAX (612) 937-0070.
This work station features adjustability and modular componentry allowing for customization. The Levitech System is available in manual, hydraulic, and electric height and tilt adjustment models. Ease of adjustment promotes proper operator posture, safe body mechanics, and allows frequent postural adjustments. The system provides the necessary foundation to complete the ergonomic work station with shelving, bins, articulating arms for binboards and monitors, jib arms, document holders, overhead tool trolleys, power strips, and lighting.
The Saunders Group, 4250 Norex Dr., Chaska, MN 55318, FAX (612) 368-9249.
GP016A planetary gearhead offers a wide range of ratios for speed reduction or torque multiplication in a 16-mm-diameter package. There are 20 different ratios ranging from 4.38:1 to 4,591:1. Efficiency is from 59 to 90% depending on the ratio. Maximum continuous torque is up to 42.5 oz-inch and 63.7 oz-inch on an intermittent basis. Weight varies from 20 to 35g. Sleeve bearings or ball bearings are available. Maximum radial load is 36N at 6 mm from flange, maximum axial load is 8 N, the recommended input speed is greater than 6,000 rpm, and the operating temperature range is -15 to 65C.
Maxon Precision Motors Inc., 838 Mitten Rd., Burlingame, CA 94010, FAX (415) 697-2887.
Version 2.40 of the control firmware in the SR2500/SR2500 digital test subsystems includes SmartLEARn to reduce test configuration load time. With this firmware, when the SR2500/SR5000 is learning the test configuration only the pins of the active I/O modules are read. When later outputting the saved test program to the VXI timing/control module, only the programming for the active modules is transferred. This greatly reduces test configuration time. In certain instances, depending on the number of unused modules in the test setup, load time can be reduced to as little as 14% of the time that would otherwise be required without the SmartLEARn feature.
Interface Technology Inc., 300 S. Lemon Creek Dr., Suite A, Walnut, CA 91789, FAX (909) 595-7177.
A high-flow diaphragm pump delivers up to 170 gpm without the air motor stalling and icing problems that are inherent with pumps of this type. A Simul-ShiftTM air valving design virtually eliminates pump stall-out under any condition, including low-air inlet pressures. By directing cold and wet exhaust air away from the pump's air motor section, a "Quick Dump" design provides high-flow fluid handling an ice-free future. Bolted construction reduces the possibility of material spillage/contamination, while providing a positive, hard-joint diaphragm seal and much easier reassembly.
Ingersoll-Rand Co., Fluid Products Div., Bryan, OH 43506, FAX (419) 636-1674.
This line of amplifiers has been expanded to include a stand-alone panel-mount version. Options include trapezoidal and sinusoidal Hall effect, software commutation, and resolver feedback. The overall size of the unit is 102 × 221 × 126 mm. Two rack enclosures are also available and both are 482 mm wide. Each rack accommodates up to four industry-standard Eurocard 3U-format amplifier cards, universal backplanes with D-type connectors, a power supply, and a fan to maximize drive efficiency. Both panel- and rack-mount packages possess an ergonomic design with easy access to connections, adjustments, and test points. On most models, selection between velocity and torque mode is jumper selectable. The power levels range from 2 to 2,000W continuous, with either a 100 or 220V ac input supply range.
Anorad Corp., 110 Oser Ave., Hauppauge, NY 11788, FAX (516) 435-1612.
MLW Series rocker switch is power rated at 5A at 125V ac SPDT, SP3T, and DPDT types with numerous circuit configurations. A compact 0.657- × 0.635-inch panel opening and 0.902-inch behind-panel depth optimize panel space. Unique stainless-steel retaining clips, interlocking anti-jamming actuator, corrosion-resistant stainless-steel housing, built-in protective cover, and epoxy-sealed solder-lug terminals insure longer switch life.
NKK Switches, 7850 E. Gelding Dr., Suite 100, Scottsdale, AZ 85260.