The "D" Series of gear pumps features either SAE "A" or "B" two-bolt mounts, SAE porting, and five-drive shaft confirations. The "D" Series is offered in single or multi-section versions that can also include a fixed flow divider or a load sense flow divider with a static or dynamic option. The series features continuous pressures to 3,500 psi, peak pressures to 4,000 psi, and speeds to 3,400 rpm.
Danfoss Inc., Danfoss Fluid Power Div., 8635 Washington Ave., Racine, WI 53406, FAX (414) 884-7440.
What makes this movie stand out from the typical high school sports story is that the teenagers are undocumented immigrants, and the big game is a NASA-sponsored marine robotics competition. Like many other Hollywood movies, however, Spare Parts only tells part of the story. What the film shows -- and doesn’t show -- raises important issues affecting STEM education in the US.
Instead of sifting through huge amounts of technical data looking for answers to assembly problems, engineers can now benefit from 3M's new initiative -- 3M Assembly Solutions. The company has organized its wealth of adhesive and tape solutions into six typical application areas, making it easier to find the best products to solve their real-world assembly and bonding problems.
Load dump occurs when a discharged battery is disconnected while the alternator is generating current and other loads remain on the alternator circuit. If left alone, the electrical spikes and transients will be transmitted along the power line, leading to malfunctions in individual electronics/sensors or permanent damage to the vehicle’s electronic system. Bottom line: An uncontrolled load dump threatens the overall safety and reliability of the vehicle.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.