Built for continuous-use applications like pump, fan or scanner devices, these RoHS-compliant motors have cog-free motion, using a Neodymium rare-earth magnet rotor and "System FAULHABER" skewed winding. With electronic commutation, the bearings are the only limit to the life of these motors. The 1525…BRC motor is 25mm long and 15 mm in diameter and can achieve a continuous torque of 1.8mNm at speeds up to 16,000 RPM, while the 3153…BRC motor is 53 mm long, 31mm in diameter and has a 28mNm continuous torque at speeds up to 6,500 RPM. The 1525…BRC motor with 9,12 and 15-volt windings and the 3153…BRC model, with nine, 12 and 24-volt windings are boyh available from stock with a 24-48-hour turnaround.
The engineers and inventors of the post WWII period turned their attention to advancements in electronics, communication, and entertainment. Breakthrough inventions range from LEGOs and computer gaming to the integrated circuit and Ethernet -- a range of advancements that have little in common except they changed our lives.
The age of touch could soon come to an end. From smartphones and smartwatches, to home devices, to in-car infotainment systems, touch is no longer the primary user interface. Technology market leaders are driving a migration from touch to voice as a user interface.
Soft starter technology has become a way to mitigate startup stressors by moderating a motor’s voltage supply during the machine start-up phase, slowly ramping it up and effectively adjusting the machine’s load behavior to protect mechanical components.
A new report from the National Institute of Standards and Technology (NIST) makes a start on developing control schemes, process measurements, and modeling and simulation methods for powder bed fusion additive manufacturing.
If you’re developing a product with lots of sensors and no access to the power grid, then you’ll want to take note of a Design News Continuing Education Center class, “Designing Low Power Systems Using Battery and Energy Harvesting Energy Sources."
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.