Pump and motor guards
Custom versions available
Pump/motor baseplates and guards are designed to ease pump installations, the company notes. Providing protection in harsh industrial environments, the products are available for size 56326 NEMA frames, for vertical or horizontal mounting. Guards are ready to assemble, have threaded mounting holes, and include bolts and shims. They are constructed of powder-coated steel or stainless steel. Wanner Engineering, www.wannereng.com Enter 640
Solenoid valves
The optional isolator plugs available
318 and 418 Series direct-acting solenoid valves are available with a high 0.8Cv flow rate and a narrow, 22-mm body that can be mounted normally open or normally closed. The 318 has multi-purpose, 2-position and 3-way valves; the 418 has 5-ported, 4-way valves. Manifolds are available for up to 12 stations. Valves can be mounted in-line, on manifolds, or with DIN rail clips. Humphrey Productswww.humphrey-products.com Enter 641
Brass Ball Valves
For common fluid control applications
The 600 series of brass ball valves is available in standard sizes, with solder ends for copper tubing, and with a vented ball for compressed air service. Ideally suited for air compression, waste water management, and low pressure steam applications, the DM600 series is a full port brass valve with threaded ends and direct mounting that reportedly eliminates the actuator bracket, reducing the space required for automated systems and eliminating misalignment between valve and actuator. Marwin Ball Valves, www.marwinvalve.com Enter 642
Pneumatic Cylinder
Redesigned with more options
The Rexroth TaskMasterฎ pneumatic cylinder line has been redesigned to offer two distinct model choices. The TM-8 series replaces the original line, and the TM-1 series matches NFPA rod thread and port dimensions. Available in 1.5-through 6-inch bore sizes, the TaskMaster cylinder is rated for 200 psi. New features include standard magnetic pistons for position sensing, oversize rod options, and port and cushion choices. Bosch Rexroth Co., www.boschrexroth-us.com Enter 643
Hydraulic Coupling System
For CNC machining centers
The new Hydro-Coupler hydraulic coupling system provides a continuous hydraulic connection to hydraulic workholding fixtures on carrousel-type pallet changers. Pressure is applied from the top of the pallet, so full clamping force is consistent and never lost. The new system automatically monitors and responds to irregularities in clamping pressures, hydraulics level, and temperature. Since hydraulic pressure loss is virtually eliminated, atmospheric oil contamination concerns are minimized, while machine uptime is increased. City Machine Tool and Die Inc.www.citymachine.com Enter 644
Injection System
High power and energy efficiency
The Moog PowerShot injection system is designed for injection-molding machines operating at high speeds and forces, which require precise control. The injection system is a sealed closed-loop actuator that requires no external power unit, and uses a single servomotor to control the entire system. Injection and decompression control is accumulator-driven, and allows closed-loop control of velocity, pressure, and position. The RKP pump is used for closed-loop control of backpressure during recovery, while recharging the accumulator for the next cycle. The PowerShot system interfaces with the customer's controller through a fieldbus and is installed with just a few connections. Moog Inc., www.moog.com Enter 645
Heat exchangers
For water and corrosive fluids
Stainless steel heat exchangers are designed for cooling semiconductor manufacturing equipment, test equipment, electronics, industrial furnaces and ovens, and medical and industrial lasers. The 730 Series exchangers are reportedly ideal for liquid-to-air applications including high-purity deionized water and corrosives. Tubing and manifold circuitry are made from 316L stainless steel. Thermatron Engineeringwww.thermatroneng.com Enter 646
Pressure switch
Additional ranges available
The 604 Series differential pressure switch features automated calibration, trapezoidal bead diaphragm design, and multi-plated contacts. Designed for use with air and non-corrosive gases, switches withstand maximum pressures of 20 inches w.c., have integrated cable strain relief, and 3/16 ID tubing connectors. Applications include ventilation, process ovens, laboratories, and clean rooms. Clark Solutions, www.clarksol.com Enter 647
Extended life pumps
Close-coupled design
A proprietary liner reportedly extends the service life of MTA Series pumps. Molded-in-place and dovetailed, the PFA liner cannot come loose from the casing during pressure and temperature fluctuations. Pumped fluids remain contained at all times. Features of the pumps include a sealless, magnetic drive; one-piece, encapsulated inner magnet assembly; and flow rates to 320 gpm. Magnatex Pumps Inc., www.magnatexpumps.com Enter 648
Piston-Actuated Valves
Reliable control in demanding applications
This line of compact and standard size piston-actuated valves is an alternative to both solenoid and ball valves for on/off control of media, including light slurries, viscous fluids, corrosives, and saturated steam (to 130 psi). Valves feature a maximum operating pressure range of 0-290 psi and vacuum to 29 inches Hg. Standard configurations include six line connection sizes from 0.5 to 2 inches NPT and BSP. The piston-actuated valve actuators are available in 45-, 63-, and 90-mm diameters. Spirax Sarco Inc., www.spiraxsarco.com/us Enter 649
Control Valves
Tighter process control
Aeroflow T2 control valves feature T2 trim, coupled with the company's digital positioning system (DPS), to reportedly provide ultra high-speed response, outstanding accuracy, and repeatability. Combined with T2 trim, exclusive Aeroflow body vanes control turbulence and vibration. Cages can be customized for any application and have up to 5 stage activation. Leslie Controls Inc., www.lesliecontrols.com Enter 650
Tweet This
3 
