Fluid Power

ROOTS PUMPS

Maintenance-free

The company's maintenance-free magnetically-coupled roots pumps are statically sealed against atmosphere, eliminating rotating seals that wear and leak. This is designed to permit safer, environmentally friendly operation by getting rid of cross contamination and oil pollution associated with leaking seals. The family of products range from 250 to 6000 m³/h. They are ideal for chemical plant, coating, semiconductor, R&D, metallurgy, packaging, and free-drying applications. Pfeiffer Vacuumhttp://rbi.ims.ca/4397-608

CABINET COOLER

For large electrical enclosures

The company's 2800 btu/hr cabinet coolers are engineered to keep electrical enclosures cool with 20F air and protect sensitive electronics from harsh environments. They use a vortex tube that cools ordinarily compressed air to 20F, and cool air circulated through the enclosures to eliminate high temperature malfunction. The products mount to NEMA 12, 4, or 4X (stainless steel) enclosures through a standard electrical knockout. EXAIR Corp.http://rbi.ims.ca/4397-609

ROTOR COATINGS

For abrasive environments

The Ultra-Shield^® rotor coatings are offered in a variety of materials, ranging from chromium to ceramic and tungsten. They are designed to give the company's cavity pumps the additional advantage needed for long life in highly abrasive and corrosive environments. They are engineered to enhance peak performance and reduce downtime. Moyno Inc.http://rbi.ims.ca/4397-610

FILTRATION SYSTEM

Corrosion-resistant

Engineered to filter process fluid within a tank to eliminate the time and expense needed to install a separate, standalone filter and pump, the In-Tank filtration system features all plastic, corrosion-resistant CPVC construction with FPM seals for exceptional chemical resistance. It is available in a single model with one filter cartridge or a double model with two cartridges. Both feature a choice of the company's WEBSTER^™ brand series D or S pumps. Haywardhttp://rbi.ims.ca/4397-611

PRESSURE SENSOR

Miniature

The SH miniature pressure sensor features a one-piece stainless steel or titanium sensing element that is 0.725 inches in length and has 0.575 inches OD. Pressure ranges from 0-500 to 0-10,000 psig are available with a variety of pressure port and electrical connection options. They are designed to be accurate and rugged, and accommodate several OEM customer applications-specific requirements. DJ Instrumentshttp://rbi.ims.ca/4397-612

CYLINDER SENSORS

Miniature

The company's line of miniature magnetic cylinder sensors uses Giant Magnetoresistive technology (GMR) to provide high sensitivity to magnetic fields in pneumatic cylinder applications. Using this technology, the products provide high accuracy, excellent repeatability, fast response times, and immunity from long-term effects of magnetic fields. They are designed to be polarity independent and offer reliable piston-position detection regardless of magnet orientation. ifm efectorhttp://rbi.ims.ca/4397-613

HEAT EXCHANGERS

Efficient performance

The Brazepak heat exchangers are engineered for applications requiring high performance in a small size. The brazed-plate products are compact and economical in a range of applications, including refrigerant condensers and evaporators, and oil coolers in engines and machinery. A special brazing process is used to bond together 316 stainless steel plates, which feature a corrugated design for maximum turbulation and high heat transfer in small surface area. ITT Standardhttp://rbi.ims.ca/4397-614

VALVE CONTROLLER

Speeds up cycle

Engineered to allow for control of one or two dispensing valves, the VC-1195A valve controller uses air to open and close the valve, providing much "crisper" valve closing. It reportedly speeds up the return/closing cycle and eliminates dripping. It is ideal for use with the company's 790 hp series spool valves. I&J Fisnar Inc.http://rbi.ims.ca/4397-615

LIGHTS

Explosion-proof

The SLEX-100 and REX-100 are compact, explosion-proof lights that are designed to provide lighting and viewing through a single port. They are ideal for hazardous locations, such as the interior of vessels, tanks, hoppers, mixers, and silos. They can be easily mounted on existing pressure vessel installations using the provided brackets. The fixtures are corrosion resistant and are made of copper-free aluminum alloy No. 356T6. Papailias Inc.http://rbi.ims.ca/4397-616

CHILLER

Low-profile design

The Durachill^™ DCA180 chiller is designed to provide reliable heat removal for lasers, EDM equipment, and other precision devices that use deionized water or other coolants with high dielectric properties. It provides up to 6000W of cooling at 86F. It is offered with a range of options, including DI water compatible wetted parts, conductivity control and display, a choice of centrifugal or turbine pump, and ambient tracking capability. PolySciencehttp://rbi.ims.ca/4397-617

FLOW INDICATORS

With flanged edges

The LIF series sight flow indicator is designed for visually observing the flow of media. It is offered in pipe sizes ranging from 0.5 to 6 inches, and it provides flanged ends faced and drilled to mate with ANSI class 150 connections. Units range in weights from 3.5 to 56 lbs, and pressure ratings range from 45 to 150 psig. Standard materials of construction include carbon or stainless steel, annealed borosilicate glass cylinders, and neoprene seals. Papailias Inc. http://rbi.ims.ca/4397-618

SIGHT FLOW INDICATOR

Durable, magnet-less

A durable paddlewheel-style flow indicator with output sensor, the Series SFI-100T sight flow indicator uses no magnets in the paddlewheel to attract ferrous materials. It is constructed of a solid brass body with a tempered glass window for viewing of the red PBT paddlewheel. Units are constructed of all ultraviolet-stabilized materials for outdoor service. Dwyer Instruments Inc.http://rbi.ims.ca/4397-619

AIR GUNS

High force, reduced noise

The Super Blast Air Guns are engineered to deliver up to 9.8 lbs of blowing force. They are available with 4, 7, or 12 Super Air Nozzles, which are designed to maximize entrained airflow and force while reducing compressed air use and noise. At full pressure of 80 psig, they have an air consumption of 56, 98, and 168 scfm while providing blowoff force of 3.2, 5.7, and 9.8 lbs. They have a zinc aluminum alloy construction and are attached to an aluminum body. EXAIR Corp.http://rbi.ims.ca/4397-620