Electronics

ONLINE DATABASE

Enter manufacturer model or serial number

Now available for Virtual TEDS is an online database; IEEE P1451.4-compliant electronic data sheets instantly provide plug-and-play capabilities to legacy sensors. Virtual TEDS can deliver the advantages of IEEE P1451.4 to measurement and automation systems using traditional sensors. To access the database, users enter the manufacturer model or serial number and are provided with that sensor's specific scaling and calibration information packaged in the IEEE P1451.4 binary format. National Instruments, www.ni.com Enter 646

CONVERTER

High speed and low noise

The AD9726 is a 16-bit digital-to-analog converter with a conversion rate that exceeds 600 msps. It reportedly solves noise and bandwidth problems by reducing intermodulation distortion, and it has a full-scale adjustment span of 2- 20 mA, allowing the product to work at lowered power levels. The product is suited for applications involving high-frequency, high-bandwidth broadcasting and communication, such as MMDS and LMDS. Analog Devices, www.analog.com Enter 647

PALLET RFID SYSTEM

Assembly and production automation

The BIS-L pallet RFID system features a read-write range of 24-100 mm and is compatible with 125 kHz systems. Consisting of three main components—a read/write head, data processor, and data carrier family—it is designed to eliminate false data, increasing dependability. Rugged enough to be permanently installed on pallets, the data carriers come in 20-, 30-, and 50-mm diameters with each size available in 40-bit read-only and 192-byte read/write versions. Balluff, www.balluff.com Enter 648

HEAT-SHRINKABLE MOLDED PARTS

Improved lead time

Now available with a 10-day lead time are nearly 1,000 part numbers for the company's heat-shrinkable molded parts. Some of the shapes included are circular boots, caps, right-angle boots, D-subminiature boots, and T- and Y-transitions. The parts are used in a range of industrial and commercial wire harness applications requiring mechanical and environmental protection, and used on military platforms. Tyco Electronics, www.tycoelectronics.com Enter 649

POWER SUPPLIES

Lightweight

Measuring high current uses 1.5 x 3 x 5 inches, the TEK 150 series of ac/dc power supplies features U-channel casing, enabling operation at up to 100W without fan cooling (up to 150W with forced cooling of 16 ft³/min.) The series includes four models, offering output voltage ratings of 5-6, 12-16, 24-30, and 48-56V. Suitable uses are in thermal printing systems where a high current may be needed for a short time to print large black areas. HiTek Power Corp., www.hitekpower.com Enter 650

FLASH MICROCONTROLLERS

Cost-effective solutions

The PIC18F8680/6680 and PIC18F8585/6585 microcontrollers feature up to 64 kbytes of self-programmable Flash memory. Using the new ECAN module—a reportedly flexible and easily used CAN 2.0B interface—multiple applications can be configured on a single node, and a device can be re-used across different applications. The devices feature an operating range of 2.0-5.5V. Microchip Technology Inc., www.microchip.com Enter 651

MINATURE DOOR SWITCH

Safe technology

The D3D uses wiping "rocker" contacts, offering a reportedly silent operation with virtually no arcing possibility. Available in plunger and lever configurations, the switch snaps into a panel, using a standard, removable crimp connector for wiring ease. It can be used in home electronics and factory equipment. Omron Electronics Inc., www.info.omron.com Enter 652

PC/104 ENCLOSURE

Simple, low-cost

Designed to be strong, durable, and functional, the ENC-104 is made from 0.0625-inch rustproof aluminum and weighs less than 2 lbs. The condensed size is meant to be small enough to mount inside equipment, but large enough to accept a stack of up to four PC/104 or PC/104 Plus modules. It is intended for embedded applications that require mounting inside NEMA boxes, OEM machinery, and other areas where it's necessary to protect a PC/104 embedded PC module stack. WinSystems Inc., www.winsystems.com Enter 653

HEAT SHRINKABLE TUBING

Made for easy installation

Featuring a meltable adhesive to seal out moisture and a heat-activated thermoplastic sealant, the Heavy-Wall Polyolefin Heat Shrink Tubing is designed for easy installation. With a 3:1 shrink ratio to fit over terminals, it functions as a strain relief that can be imprinted for identification. The product comes in red and black colors, 10 expanded sizes, and is self-extinguishing and UV-resistant. Appropriate applications include heavy equipment connections, and battery terminals. Nelco Products, Inc. www.nelcoproducts.com Enter 654

POWER CORDAGE

Rugged, durable

Available for same-day shipping on standard orders of up to 1000 ft, the Direct-stocking program allows customers to choose from a wide range of gauge, conductor, and stranding configurations. Choices include SJT, a PVC insulated flexible power cord for demanding applications, and the EnduroFlex 1®, featuring a thermoplastic alloy jacket material that reportedly provides resistance to abrasion, oil, detergents, solvents, and moisture. Northwire Inc., www.northwire.com Enter 655

SURFACE-MOUNT RELAYS

Practical solution

Designed to provide improved RF signal repeatability over the frequency range, the Series GRF300 and GRF303 broadband TO-5 electromechanical relays employ a butt-lead mounting scheme. They also feature a ground shield that insulates and shields each lead, reportedly ensuring contact-to-contact and pole-to-pole isolation. Each model is available in 5 and 12V dc. Teledyne Relays, www.teledynerelays.com Enter 656

COIN CELL RETAINERS

Compatible with most soldering operations

The low profile coin cell retainers feature automated surface mount placement and top-loading battery convenience for high-density packaging. The products will accept 6.8-, 12-, 16-, 20-, 23-, and 24-mm cells from major manufacturers, and they are designed to provide high reliability spring tension, low contact resistance, and have clearly marked polarity. Keystone Electronics Corp. www.keyelco.com Enter 657

HIGH TEMP BATTERIES

For monitoring systems use

CR2450-HR (for standard vehicles) and CR2450HR-EX (for premium vehicles) are high-temperature resistant lithium manganese dioxide batteries. They are designed for use in onboard tire pressure monitoring systems preparing for the new Federal rules mandating automatic warning of faulty tires. A change in gasket material, new crimping structure, and improved content are included in the new designs. Maxell Corporation, www.maxell.com Enter 658

IR SENSOR

Provides amplified output

The HOA1180 IR sensor features reflective metal components with a choice of phototransistor (fast response) or photodarlington (higher sensitivity) output. The sensor provides amplified output for reportedly easy differentiation between actual signals and noise. It is suited for applications involving extreme temperatures or wide operating temperature ranges. Honeywellwww.honeywell.com/sensing Enter 659

LCD TOUCHMONITOR

Wider viewing angle

The 1247L 12.1 in LCD rear-mount touch monitor features up to 800 x 600 resolution at 75 Hz. With an injection-molded minibezel and watertight seal, the monitor comes with IntelliTouch pure glass surface-wave touch technology for finger or gloved-hand operation. The product is ideally suited for small form factor public access. Tyco Electronics www.tycoelectronics.com Enter 670

HIGH-SPEED CARD READER

480-mbps data transfer rates

The ImageMate 8-in-1 card reader features four slots that accept industry-standard storage cards; in addition, the slots can be used simultaneously to transfer data between individual cards and/or the computer. The product uses Hi-Speed USB 2.0 and is capable of data transfer rates of up to 480 mbps. It is ideal for users who rely on a variety of flash memory cards for electronic gadgets. SanDisk Corp., www.sandisk.com Enter 671

VGA LCD KIT

No driver installation required

Designed to be a complete hardware solution that takes the guesswork out of on-site configuration, the SK-2014R – 14.1 analog VGA LCD kit offers a tight dot pitch and uses an existing video controller card. The pre-configured kits include cables, inverter, controller card, and LCD. Suited applications include professionals in industries such as kiosk, POS, and process controls. Earth Computer Technologies www.earthlcd.com Enter 672

FIBER-OPTIC BACKLIGHTING PANELS

Low power consumption

The company's new fiber-optic backlighting panels feature conductive pads that integrate switch technology into the fiber-optic backlight. Designed for membrane switch backlighting applications, the products can be used in keypads, keyboards, remote controls, and any other applications requiring membrane switches, according to the company. They reportedly have long lives, no impact on the tactile feel of elastomeric keys, and permit low consumption. Lumitex Inc., www.lumitex.com Enter 673

SDRAMs

Small 160-mm2 size

The 1-Gbit Double Data Rate Synchronous DRAM was created using the company's 110 nm CMOS process. It is reportedly the industry's smallest 1-Gbit DDR SDRAM to date at a size of 160 mm². It features dual-die-stack, allowing high density on a small space. Infineon Technologies Corp.www.infineon.com/boerse Enter 674

ADAPTER PLUGS

Wiring access for all I/O control signals

Designed to provide wiring access for all I/O control signals for up to 24-position I/O racks, the I/OCA adapter plugs directly into the IDC 50-pin connector of industry standard mounting racks. The 26-position terminal block provides wiring access to each I/O control line, in addition to +V and common. Wire sizes range from 24 to 16 AWG. Brentek International, Inc., www.brentek.com Enter 675

INVERTER IN KIT FORM

Provides packaging flexibility

An 8m class inverter in kit form is now offered to provide packaging flexibility to the LCD designer. Supplied with the circuit design, critical magnet components, and complete layout validation, this inverter kit features up to 5W of output power, and is designed for users of one- or two-lamp LCD modules. Endicott Research Group, www.ergpower.com Enter 676

POWER RELAY

AZ2270 series

The AZ2270 relay from American Zettler features a QC connection that has been moved to give the advantage of decreasing the internal temperature rise. A physical match to the T9A style of relay, it is rated at 30A, 277V ac, and up to 2 HP. It features class F insulation, is available with ac or dc coils, and with form A, B, or C contacts. American Zettler, www.azettler.com Enter 677

SPEED SENSOR

Broader range of applications

The HE950 sensor features dual Hall-Effect sensing and signal processing, making it capable of operating across a range of target sizes. It produces a digital pulse signal for use with speed switches, tachometers, counters, and signal conditioners, or as a direct pulse input into PLCs. Installation is reportedly easy, and it can be mounted up to 1500 ft from the control unit. Applications include high speed monitoring of gear-teeth, spokes, or keyway. Electro-Sensors Inc., www.electro-sensors.com Enter 678

MICROWAVE COAXIAL ASSEMBLIES

Frequencies up to 67 GHz

A family of custom microwave cable assemblies in frequency ranges from dc through 67 GHz is available. Designed with laboratory and production applications in mind, their construction allows the assemblies to be flexible while maintaining a crush resistance of 800 lbs per linear inch. The test assemblies offer excellent phase/amplitude stability, ruggedized connectors, and quick turn-around time for standard lengths. W.L. Gore & Associates, Inc.www.gore.com/electronics Enter 679

BEAM FORK SENSOR

Precision with ease of use

Designed for high-volume, in-process error proofing assembly applications, Baulluff's new one-piece "plug and play" BGL thru beam fork sensor allows fast, accurate installation without the need for special brackets or complex beam alignment procedures. Available in 30-, 50-, 80-, and 120-mm sizes, this laser produces precision resolution down to .03 mm. Balluff, Inc., www.balluff.com Enter 680

PRESSURE-MOUNTED SOCKET

Maximum ease of use and flexibility

The new CSP/MicroBGA test and burn-in socket for devices from 14 to 27 mm2, in applications under 1 GHz, incorporate spring probe contacts for maximum ease of use and flexibility. Requiring no soldering, it is ideal for test and burn-in of CSP, MicroBGA, DSP, LGA, SRAM, DRAM, and Flash Devices with a pitch of .50 mm and larger. Features include Interposer sets with different footprints, integral plastic alignment posts that accurately line up with the interposer set for secure mounting, and a four point crown to ensure "scrub" on the solder oxides. Aries Electronics, www.arieselec.com Enter 681

DC CURRENT TRANSDUCERS

Tighter accuracy, wider temperature range

A new series of dc current transducers provides tighter accuracy to 1.0% FS over a wider temperature range of -40 to 85C. Ideal for local and remote power stations where feedback of operational data is required, the new series 920 and 921 transducer automatically monitors system data, according to the company. Each sensor only uses a two-wire connection, simplifying installation, and incorporates a yoke that opens and closes, making them suitable for use in updating older systems, the company adds. American Aerospace Controlswww.a-a-c.com Enter 682

LINEAR ACCELEROMETER

Single and tri-axial configurations

Designed to operate from +24 to +32V dc aircraft power, the SA-102MFTA and it's tri-axial version SA-302MFTA miniature accelerometers feature high level output signal and self-regulation qualities of the servo loop design, making them excellent candidates for airborne telemetry applications, according to the company. The output signal format is compatible with most airborne VCO's, and the SA-102MFTA incorporates the HP torque system, the company adds. Columbia Research Laboratories, www.columbiaresearchlab.com Enter 683

FIBER OPTIC BACKLIGHTING PANELS

With membrane switch conductive pads

Designed for use with keypads, keyboards, and membrane switches, the new fiber optic backlighting panels feature conductive pads that are printed onto the underside of the fiber optic panel, and when integrated with rubber keypads or membrane switch overlays, function as a switch, according to the company. These backlights can have up to 100,000 hours of life and permit low power consumption. Lumitex, Inc. www.lumitex.com Enter 684

LOW-POWER SWITCHERS

Wide voltage input range

Low-power switching units offer 4.5 W/inch³ and deliver up to 13A from the primary output. Designed for 1U installation, Models LPT82 and LPT83 include over-voltage protection, power factor correction, input range of 85-265V ac, remote voltage sensing and the main output, and a power-fail output signal. Units have UL, CSA, CE, CB, NEMKO and VDE approvals. Astec Power, www.astec.com. Enter 685