Analog Control
|
AFE5851 Analog Front End Chip
The
AFE5851 analog front end chip is the first 16-channel AFE for the
ultrasound market and is the smallest, lowest-power analog front end.
|
Texas Instruments
|
Components, Hardware & Interconnect
|
MEMS-Based ADMP421 Microphone
The
ADMP421 Microphone offers better sound quality, greater range and
smaller size for VoIP-enabled cell phones and Bluetooth headsets.
CX20562 USB Speakers-on-a-Chip
The
CX20562 USB Speakers-on-a-Chip simplifies the design of smart phones
and PC sound systems and could also enable engineers to simplify their
designs, reduce space, and lower their bill-of-material costs.
|
Analog
Devices Inc.
Conexant
Systems Inc.
|
Digital Control/Embedded Computing
|
MC038-010 Microcontroller
The
MC038-010 Microcontroller delivers electronic control to small motors
in HVAC systems and to high-intensity lighting applications.
|
Sauer-Danfoss Inc. |
Power Management & Control
|
PowerPSoC Single-Chip LED Solution
The
PowerPSoC Single-Chip LED Solution integrates the ability to control
and drive high-power LEDs and promises to reduce cost and boost
reliability of LED-based systems.
|
Cypress Semiconductor Corp.
|
Sensors & Vision
|
3D Image Sensor
The
3D Image Sensor measures size, shape and volume of products in
industrial applications and can detect objects in three dimensions.
|
ifm efector inc.
|
Test & Measurement
|
PXI Express RF Modular Instruments
The
PXI Express RF Modular Instruments' family combines multicore computing
with a high-speed computer bus to enable manufacturers to quickly test
RF-based products.
U2700A Series USB Modular Instruments
The
U2700A Series USB Modular Instruments' family of paperback-sized test
instruments can be accessed through a PC's USB port, making it simpler
to do quick configuration and measurement on the go.
|
National
Instruments
Agilent
Technologies
|
MATERIALS
|
|
|
Engineering Plastics
| Xycomp Composite Containment Shell
With
reduced heat transfer and nearly zero eddy current loss, Greene,
Tweed's Xycomp® containment shells offer a significant reduction in
energy consumption to keep magnetic-driven pumps running efficiently
and effectively.
| Greene, Tweed & Co. |
Fastening, Joining & Assembly Components
|
ST-12C Counterbalanced Hinge
The
counterbalance design of the ST-12C requires less effort to move
heavier objects as compared to friction-only hinges, making it easier
for equipment operators to lift and position hinged components.
|
Southco
|
Materials Processing
| Silent Feet
Silent
Feet uses an advanced polymer technology to absorb vibrations caused by
appliances such as refrigerators and washing machines.
| The Vibration Solution LLC |
Metals
|
Small Crest-to-Crest Series of Wave Springs
The small series of standard-sized crest-to-crest wave springs feature improved grain strength and can reduce assembly sizes.
|
Smalley Steel Ring Co.
|
Other Materials
| High-Definition Lenticular Lens
The
new lenticular lens technology reduces materials costs by 40 percent,
improves resolution, and enables very fine print and barcodes to be
legible under the lens.
| National Graphics Inc.
|
MOTION CONTROL/AUTOMATION
|
|
|
Amplifiers & Drives
|
IndraDrive Cs
The
integration of motion and I/O control in the IndraDrive Cs allows
intelligence to be distributed down to the drive, freeing up control
for higher level tasks.
|
Bosch Rexroth
|
Controllers
| F2802x/3x PiccoloTM Microcontrollers
A
cost-effective solution for high-performance motor control
applications, Piccolo's unique floating-point, control law accelerator
runs a high-speed control loop without using the main CPU.
| Texas Instruments
|
Feedback Devices
|
Sendix F36 Encoder
The
Sendix F36 encoder is the first fully optical, absolute multiturn
encoder that does not require mechanical gears to drive code disks or
magnetic sensors to count rotations and calculate position.
|
Fritz Kuebler GmbH
(offered in the U.S. by TURCK)
|
Motors & Mechanical Components
|
Tritex II AC Linear or Rotary Actuator
Integrating
a roller-screw-driven actuator with servo drive and position controller
into one package, the Tritex II AC actuator delivers significant power
and speed.
|
Exlar Corp. |
Automation
|
UMQ Series Safety Mats
The UMQ Series Safety mats feature a patented IP67 quick disconnect feature that speeds cable installation and replacement.
|
Omron STI
|
Fluid Power Connectors & Components
|
FD83 Quick Disconnect Coupling
Featuring
a valve design that provides an unobstructed flow path, the FD83 quick
disconnect coupling targets high flow applications that require a
reliable dry break connection.
|
Eaton Corp.
|
RAPID PROTOTYPING TOOLS
|
|
|
Rapid Prototyping Tools
|
uPrint Personal 3D Printer
The
uPrint Personal 3D Printer prints 3-D models directly from CAD
software, using fused deposition modeling technology to build models
layer by layer in ABSplus thermoplastic.
|
Dimension 3D Printers by Stratasys
|
HARDWARE AND SOFTWARE
|
|
|
Analysis & Calculation Software
|
MapleSim2
MapleSim2's
new 3-D visualization and animation tools transform multi-body models
into realistic animations, providing engineers an intimate look into
system behavior when designing complex systems.
|
Maplesoft
|
CAD Software
|
Solid Edge with Synchronous Technology
This
CAD tool delivers the speed and flexibility typically associated with
direct modeling tools with the precise control and built-in
intelligence of dimension-driven or history-based CAD models.
|
Siemens PLM Software
|
Hardware
|
Hinged Platform Tool/7336714
The
Hinged Platform Tool is a patented technology, made of high density
polyethylene, that helps packaging engineers easily upright heavy
electrical components without excessive manpower.
|
IBM
|
Tweet This
8 
