Skip navigation
Electronics Industry Search
Advertisement

GE Requests EPA Approve Isobutane for Monogram® Refrigerators with Double Benefits

April 12, 2009

In a recent press release, “GE Opening a Door to a Future of Cleaner Home Refrigeration,” GE Appliances announced a petition to the Environmental Protection Agency (EPA) requesting approval to use the hydrocarbon isobutane (R-600a) as the refrigerant in GE’s new Monogram® brand refrigerator, which is slated for introduction in the U.S. in early 2010. According to the press release, the new refrigerant not only reduces appliance greenhouse emissions caused by off-gassing, but it also improves efficiency, making the technology a double bonus for U.S. consumers.

Until the 1990’s chlorofluorocarbons (CFC) were the dominant working fluid type in US refrigeration and air-conditioning systems. However, the Montreal Protocol led to a ban on these working fluids due to their ozone depletion potential (ODP). A painful conversion to hydrofluorocarbon (HFCs) refrigerants ensued, which often necessitated hardware modifications because the thermo-physical properties of HFC’s are mismatched to CFCs. While HFC’s are more benign toward the ozone layer, they have high global warming potential (GWP). Thus HFCs are undesirable, especially in countries that have ratified the Kyoto Protocol, but also in the U.S. where preventing global warming has become a national obsession.

So-called natural refrigerants such as carbon dioxide (R-744), isobutane (R-600a), and propane (R-290a) represent another alternative to CFCs. However, fear of flammability and other health risks caused natural refrigerants to be resisted by U.S. regulators. Nonetheless, if the EPA approves GE’s petition, this trend may see swift reversal.

According to a recent article by Larry Adams of ApplianceDesign.com entitled, “Cooling Technologies: Alternative Refrigerants Attract Attention,” isobutane and propane are the most widely used alternative refrigerants in the world; they have zero ODP and negligible GWP and can be found operating safely today in European appliances. Most importantly, the feature setting hydrocarbons apart from other natural refrigerants is that they are a near drop-in replacement for current refrigerants. Thus, painful system modifications required for the CFC to HCF switch will be less prevalent if hydrocarbon refrigerants are widely adopted in the U.S.

Despite the benefits of isobutene refrigerant, this working fluid is still flammable and exposure to gas at high concentrations can be toxic. GE and other hydrocarbon refrigerator designers must ensure that no ignition sources are present. However, the extra required system robustness should be worth the benefits.

Posted by Matthew Traum on April 12, 2009 | Comments (2)

October 2, 2009
In response to: GE Requests EPA Approve Isobutane for Monogram® Refrigerators with Double Benefits
duane van etten commented:

HYDRO CARBON HAS BEEN AROUND FOR YEAR YET THE PUBLIC KNOWS NOTHING. RECOMMEND PUBLIC INFORMATIO PROGRAM IF YOU AR TO SELL THIS TECHOLOGY GOOD LUCK


April 29, 2009
In response to: GE Requests EPA Approve Isobutane for Monogram® Refrigerators with Double Benefits
jgoz commented:

Sir, Hydrocarbons as refrigerant-fluids are used in Europe and the rest of the world since 1993 totalling 350 million, in the USA approx 4 million car AC systems are using HC refrigerants. Approx 300.000 icecream freezers are used worldwide with these fluids and many more to come. If you agree that Global Warming is a problem than HC could be your answer for refrigeration and airconditioning.

POST A COMMENT
Display Name
captcha

Before submitting this form, please type the characters displayed above. Note the letters are case sensitive:

Advertisement
Advertisement

Design News Partner Zones

Light Matters: The Unsung Heroes of Modern Health Care
First, let's define "no-compromise." In an ideal configuration, this lamp would use a high-brightness LED (HBLED) that is built into a small, integrated package and is able to produce a large quantity of focused light, operate with a high level of reliability and generate no audible noise. Is this difficult? Yes, but it is possible.
Read More


Design Engineers' Portal for Sensing and Machine Safety
Whatever industry you're in, or whatever product you manufacture, the right sensors to automate your plant, and to improve your overall efficiency, quality and safety are a must. You'll find Banner Engineering to be an amazing resource of products, training and people with expertise.


Test & Measurement World Machine Vision & Inspection Report
Topics include machine-vision software, Power over Camera Link, thermal imaging and frame grabbers. Read More

Design News Partner Zone Directory »

Please visit these other Reed Business sites