ADVERTISEMENT
You will be redirected to your destination in 10 seconds.
Electronics Industry Search

Polling Question

Should the government bail out U.S. automakers?

  • Yes
  • No



View Previous Poll Results
Advertisement

Link This | Email this | Blog This | Comments (4)

Maxtor support conundrum

November 21, 2006

Note to Maxtor: Designing return and warranty support is just as important as designing the product itself. Here's the story. I've got a new 300 GB Maxtor 3in1 network storage drive that my network can't find. I've done all the usual things such as disabling my firewall and my network still can't find it. I've concluded the drive is faulty because I can't shut it off without pulling the plug. The instructions say press the off/on button for five seconds and it should power down, but it doesn't.

So I ventured onto Maxtor's Warranty Services web page to generate an RMA number. My intent was to swap the malfunctioning unit for a healthy one. After all, I want to back up the thousands of digital photos I've taken. Everything was fine until Maxtor insisted I generate a diagnostic code by running, yes, you guessed it, diagnostics on the drive. But how would I do that if I can't find the drive on my network? For sure, Maxtor doesn't want folks sending in functioning drives that were not installed properly, but I am pretty savvy about such things. It worked initially and doesn't now. This leaves me with no other option than to call Maxtor support which opens in 10 minutes. That it took 15 minutes to find the support number didn't irritate me at all. NOT.

Stay tuned. If it's me, I'll eat crow. If it's Maxtor's fault, I'll do what I do best - yell and scream. BTW, I bought the drive from Amazon, whose customer service is usually unbeatable. It's advice? Call Maxtor.  

Stuck on and unrecognizable

Posted by John Dodge on November 21, 2006 | Comments (4)
Industries: Gadget Freak

December 9, 2007
In response to: Maxtor support conundrum
cayrick commented:

I bought a Maxtor One touch II drive. This is the one with the eye catching ice cold colored plastic side panels. This is a classic example of form over function. There are horizontal cooling vents on the side panels but they do not help to dissipate the heat. If your computer locks up while backing up you too have an overheating problem. Don't expect Seagate's support group to point this out. I spent hours on the problem before it dawned on me. Side panels should be metallic even with heat fins and there should be metal to metal contact all the way back to the drive itself.


October 10, 2007
In response to: Maxtor support conundrum
bluebottle47 commented:

I have been trying to contact Maxtor urgently (or Seagate for that matter, as they seem to have taken over Maxtor), but there seems to be no way of doing this. I purchased a 500GB Personal Store 3200 external hard disk from the PC World chain in the UK, and was amazed to find that there was a trojan horse virus on the new disk, sitting in a hidden file. Having had no response from PC World, I felt it important that Maxtor was aware that they were distributing viruses with their new hardware: maybe I'm a bit stupid, but I can't see how to do so. Perhaps they don't care? Seems like it to me!


November 22, 2006
In response to: Maxtor support conundrum
John Dodge commented:

Piense, Good to hear from you as well. This should be a really fun blog. I get to write about good and lousy product quality and design. And I have lots to write about! Well, you get some visibility here for the non-responsive Halloween costume company. Who was it?


November 21, 2006
In response to: Maxtor support conundrum
Piense El Tanque commented:

John, It's great to see you back on the web! Difficult return policies certainly are irritating. Let me tell you a story of difficult customer service for a completely unrelated product. My mother went online to order halloween costumes for my children (ages 1 1/2 and 2 1/2). The oldest is a bit small for his age and the youngest is a bit big. The Cookie Monster costume that she wanted to order as it would compliment an Elmo costume that we already had was sold out. She then decided to go a different direction and purchased two monkey costumes. The transaction went smoothly and the costumes arrived promptly. The problem was that there were two sizes available 2/4 and 5/6. Due to the ages of my children she, of course, selected 2/4. The costume barely fit the youngest and was way too short for the oldest, who again is small for his age. Upon reviewing the return policy she finds out that they charge a 15% restocking fee on ALL returns. My mother, who is a writer, drafted an email explaining the situation and her discontentment with the return policy. What response do you suppose she received from this company? NONE! Needless to say, next year we will be purchasing their halloween custumes from some place else. Had they been more accomodating or at least responded to an email, they could have recieved orders for custumes for the next several years. Service is what brings customers back...too bad many companies haven't figured this one out.

POST A COMMENT
Display Name
captcha

Before submitting this form, please type the code above:

Advertisement
Advertisement

Design News Partner Zones

AnarkCAD/CAE Model Clean-Up: Reduce Iterative Cycles
This webinar featured research and survey results related to problems associated with preparing CAD geometry for CAE applications.  We discussed how Recipe-Based Automation can help create "just-in-time" CAE-ready geometry each time a cad model is updated. Watch the Presentation


Light Matters: Systems Level Approach to HBLED illumination applications
Its good practice to apply a systems-level approach to high-brightness LED (HBLED) illumination applications. Minimally, the system includes the optical, thermal and electrical characteristics of the of the HBLED, the lens (if any) which is built-in to its package, secondary optics such as external plastic lenses/reflectors to direct the light as your application requires and power driver electronics. Read More


Design Engineers' Portal for Sensing and Machine Safety
Whatever industry you're in, or whatever product you manufacture, the right sensors to automate your plant, and to improve your overall efficiency, quality and safety are a must. You'll find Banner Engineering to be an amazing resource of products, training and people with expertise.

Design News Partner Zone Directory »

Please visit these other Reed Business sites