Nice look, but why wouldn't a wire screen work just as well and be cheaper to make since all that fancy plastic molding isn't needed any more. Unless this is some test run for next years fancy designed covers. Plus, you would be getting two birds with one stone. Cheaper and looks just as good with customer satisfaction bonus when they see it isn't just a plastic box and there is some metal in there.
If dirt is everyone's concern... why not do a thermal syphon radiator setup? No fans and no filter that never gets changed or even cleaned.
I noticed several comments about air filters. Adding a filter to the airflow of the system will likely diminish performance. These are architected very much like servers and other data center products with high performance chipsets efficient airflow designed to support the cooling solution. Any obstruction, even a filter, will likely impact the airflow, raising the temperature of the system and diminishing performance.
The internal layout of the systems were designed to make occasional cleaning much easier. Additionally, on the T7600 all of the hard drives can be removed from the front and the power supply can be removed (both tool-less) from the rear to help any with any additional cleaning or servicing needs.
Ah, so Dell have basically caught up to the case design produced by Apple for the G5 design years ago, but added a grill that will get covered in dust really quickly and be a pain to clean. I'm with Widefoot on this. I would like to see a stylish darker-than-mid grey vertically pleated, electrostatically treated plastic fibre filter on the front. It would be easily removable to facilitate cleaning and there would probably be a spare in the box with the unit for convenience. It would be very easy to design such a unit, wouldn't cost a fortune to manufacture or take a lot of effort to manufacture, unlike the metal grill described here. Okay, so this is a workstation class machine, and someone probably thought that engineers are likely to be using these - so lets put something techie in her so they appreciate the engineering... I would appreciate a high performance machine with the costs associated with manufacture put into a faster, more reliable machine that is easy to maintain and upgrade, not the aesthetics provided by a grill. Ship mine without the grill when I upgrade next - with a credit for doing so - I'll make a filter for the front myself using laser sintering. Actually, the way things are going, I will be going to Boxx or someone like that for my next machine. Dell customer support is becoming more and more difficult to work with and for a company under pressure in the market place, this is a great way to fail quicker. A fancy new design won't help success.
It's nice to look at, but with all the Dell Precision workstations I've used (more than a dozen) I've never seen an air filter to clean the incoming air. So boards and components get covered in dust, hair, insects, etc. Especially if your computer rests on a carpet. Adding insulation isn't going to help that Xeon processor...
So I'd have to tape some foam over that lovely cover, and put an additional draw fan at the back to return the airflow to a reasonable level. Now I'm at risk of upsetting the internal flow management, adding another power load, and losing the nice grill.
During the redesign would have been the perfect time to add the filter - maybe next time?
Technology can go a long way toward helping people at all levels in manufacturing, and this list of technologies and solutions can help the manufacturing industry.
The next time you're churning through simulation models, manipulating 3D designs in real-time, or rendering a beautiful photo-realistic image, take a moment to think about all the work that goes on behind the scenes and be glad you don't have to worry about it.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
