HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  RESOURCE CENTER  |  INDUSTRIES
Blogs
Mechatronics Zone
Even More on Rotary Encoders
3/5/2013

This diagram shows the carrier signal and the modulation by a sine and cosine signal. The vertical line indicates sampling at signal maxima. Note the phase change in the sine signal at 0 and 180 degrees, and in the cosine signal at 90 and 270 degrees.

Return to Article

View Comments: Threaded|Newest First|Oldest First
User Rank
Platinum
sin-cos excitation
3/5/2013 8:58:40 AM
NO RATINGS
Jon,

In the old days, it was common to excite the sin and cos windings with sinusoidal signals that were 90 degrees out of phase (sin and cos).  Then when the shaft rotates, the rotor winding produces a fixed amplitude sine wave, whose phase shifts in proportion to the shaft angle.  The control system must then resolve the phase angle of the rotor winding against a reference wave.  This was a relatively easy thing to do with analog circuitry.  The reference waveform could be the position command signal.  The command signal to the actuator is then proportional to the phase error between the resolver rotor and the reference signal.

User Rank
Platinum
Thanks!
3/22/2013 5:01:11 PM
NO RATINGS
Thanks for the series.  I'm hanging on to the links so that the new people can get some training on stuff that isn't taught in the schools.

 Partner Zone
More Blogs from Mechatronics Zone
Engineers use rotary encoders to measure the angular position of an attached device or to measure distance indirectly.
The Machinist Calc Pro computes speeds and feed rates for milling, turning, and drilling: cutting speed, spindle speed, feed rate (inches/minute), cutting feed, etc.
During a recent meeting with engineering-school faculty and alumni, Contributing Technical Editor Jon Titus talked about whether colleges should educate generalists or specialists. What do you think?
Contributing technical editor Jon Titus wraps up his undersampling columns with sample rates and a plot with extrapolated lines.
Design News Webinar Series
5/22/2013 9:00 a.m. California / 12:00 p.m. New York / 5:00 p.m. London
5/15/2013 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
5/29/2013 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
5/30/2013 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
Blogs from Our Sponsors
From Dell / Intel®
Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013    3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
Most recent post: Scott Hamilton
From Dell / Intel®
Trey Morton, Dell, 4/25/2013    2
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
Most recent post: honur
From Dell / Intel®
Kirsten Billhardt, Manufacturing Industry Marketing Strategist, Dell, 3/26/2013    5
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
Most recent post: notarboca
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Jun 10 - 14, Exploring Application-Specific Programmable Logic Devices
SEMESTERS: 1  |  2  |  3

DN Radio
Sponsored by
NEXT UPCOMING BROADCAST
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
Twitter Feed
Like Us on Facebook

### Technology Marketplace

#### Datasheets.com Parts Search

##### 185 million searchable parts (please enter a part number or hit search to begin)
Copyright © 2013 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service