My contact at Calculated Industries sent along the following information, which should help people interested in apps for their smart phones and computers:
"An Android app is available now, $19.95 at Android Market (or wherever you go nowadays – Google Play?) and an iOS version should be ready end of January and a downloadable PC version end of February."
I probably need to get into the 20th century (not to mention the 21st century.) I have a Machinist's Handbook as well as a host of single sheets with various feed rates, drill and tap combinations, conversions, etc etc. in my work shop now. The device you mention in your blog would greatly facilitate finding information. I have discovered my grandsons are "engineers in training" and often "co-op" my charts and books when working in the shop. Amazing how the kids take to things of this nature and we always have a project in the works. I'm like most guys in that everything has a place and everything in its place—except when they are working. Great information and thank you for the site.
Cabe, single-use devices will always rule when they are clearly superior. Take as an analogy a Swiss Army Knife or a Leatherman. Having fifteen different tools in a single device that fits in your pocket can be mighty handy, but one will always reach for a real Phillips head screwdriver for continuous use, or a much larger knife when it's time for serious cutting.
The thing about smart-phones is, they ARE superior in many cases to the single-use tool. My Galaxy Note phone makes a terrific GPS when driving, so I don't really need a single-function one. I'm quite satisfied with it as a music device, so I don't really need a stand-alone MP3 player.
I use it as a camera frequently, but DO have a single-function camera for really good quality pictures.
In the case of the Machinist Calc Pro, the smart phones offer most if not all of the functions, as well as doing all the rest of the things.
Where the Machinist Calc Pro MUST shine in order to become popular is ruggedness (other readers commented they would not risk a smart phone in their shop environment) and lower price. The cost of the Machinist Calc Pro is almost high enough to not be worth it.
Is this the end for standalone devices? The consensus I see in this thread says everyone prefers the smartphone/tablet app over the Machinist Calc pro. This reminds me of a pocket golf ball finder device that would let you look through a screen to find the ball hidden in the grass. It used a few filters to remove the green color, if I recall. That immediately went to the smartphone.
Having all references in one spot is the way to go, I am afraid.
This is great but I would prefer the UI of an app. I don't like grime on my phone either, but usually try to keep clean enough not to have it. It's so cool that machinery's handbook has an app!! As for feeds and speeds our engineers, who do the programs, ALWAYS calculate them. When you are programming $M machines with expensive tooling and making costly parts it is a must. Of course the guys on the machines often do their 'tweaks' that shorten tooling lives...I find that most of the time people run too low of chip loads. Usually if there is chatter the feed should be increased, not decreased. Once you start playing with both the spindle speed and the feed you had better get a calculator out.
If I have enough experience with the tools and materials I am cutting, I can usually guess close enough. However, it is easy to waste a lot of time cutting too slow, and/or burn up tools by missing the surface footage on the high side.
From my experience, people tend to use too low of feeds and speeds on carbide tools, and too high of speeds on high speed steel tools. People who are used to the feeds and speeds for HSS tend to be afraid to run the speeds and feeds that carbide wants to run at. After you run carbide for a while it is easy to accidentally push HSS tools too hard and burn them up.
During a recent meeting with engineering-school faculty and alumni, Contributing Technical Editor Jon Titus talked about whether colleges should educate generalists or specialists. What do you think?
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
