This diagram shows the carrier signal and the modulation by a sine and cosine signal. The vertical line indicates sampling at signal maxima. Note the phase change in the sine signal at 0 and 180 degrees, and in the cosine signal at 90 and 270 degrees.
In the old days, it was common to excite the sin and cos windings with sinusoidal signals that were 90 degrees out of phase (sin and cos). Then when the shaft rotates, the rotor winding produces a fixed amplitude sine wave, whose phase shifts in proportion to the shaft angle. The control system must then resolve the phase angle of the rotor winding against a reference wave. This was a relatively easy thing to do with analog circuitry. The reference waveform could be the position command signal. The command signal to the actuator is then proportional to the phase error between the resolver rotor and the reference signal.
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is