Electronic News & Comment

Slideshow: 18 People You Didn't Know Were Engineers

1 saves
View Comments: Newest First|Oldest First|Threaded View
Page 1/7  >  >>
User Rank
Re: We need more
Fernydude   1/30/2014 4:30:44 PM
I'm not too worried about the male/female ratio. I think it's looking up, half of our interns this year were female chemical, material science, and electrical. My daughter was just accepted into the Madison School of Engineering last week. I'm so proud of her! With the renewed emphasis on STEM and Advanced Placement classes the curve is changing. I'd say our chemical side is currently 50% or more female and our analytical dept. is 90% female. EE, ME, and software still male dominated here in the Midwest.

User Rank
Re: We need more
Radwan   10/11/2013 2:05:39 PM
I think Engi neering course is one of the most deffieclt and interesting subject

espacilly when your studing it or reading with practice ,But in the thered world

its application will falistreted you due to limite application and use,  Even if years

pass you will get more knowladge which you can ont use it in practical life,but

the Engineering people will remain cleaver and smarte as i bielieve . for this reason

Engineers if enter any other field will be in firest class.

User Rank
Re: John Sununu
Tom-R   10/11/2013 10:31:27 AM
I agree that music and engineering seem too different to both interest the same person, but I'll admit I probably use only half my brain. The most brilliant people I know seem to be good at everything. They play instruments at the highest levels, and may work as surgeons during day. I met a medical student this fall that was an engineer first, and had built a company doing computer controls. Now he was becoming a doctor because he wanted to help society, instead of being part of the business rat race. You would think he would be busy enough with all his studies, but on the side he was helping to develop a program to better display medial research results for the doctors he was training under. I know he will never now as much about my field of engineering as I do, and he can ask the simplest of questions, but I also know he could have learned everything I know in about 1/10 the time it took me. So learning an instrument for him is just something to do, to understand and appreciate it better. Maybe I'll take up the harmonica....

User Rank
Alan Kulwicki
RTristani   10/11/2013 10:19:10 AM
Alan Kulwicki received a Bachelors in Mechanical Engineering from University of Wisconsin in 1977, and became the 1992 NASCAR Winston Cup Champion.  At a time when Owner/Driver combinations were rare, Kulwicki used that combination and won the championship.  His death in a plane crash was not only a loss for the racing world, but for the whole world.


Thank you for the great story.

User Rank
People you didn't know were engineers
esb   8/9/2013 1:26:11 PM
You neglected GENERAL SIR JOH MONASH, the smartest general you never heard of, unless you are Australian.  His face is on the Australian $100 bill.  When he died, 10% of all the Australians in the world were at his funeral.  He built railroads, introduced reinforced concrete to Australia, and electrified the state of Victoria.  He was also a patent lawyer and a concert pianist.  After he took command of the Australian Corps in 1918, he never lost a battle and spearheaded the "hundred days campaign" which defeated the Germans on the Western Front.  However, most histories of WW1 don't mention him or skip most of his accomplishements, because the Brits didn't like him. (1) He was a reservist, a civilian when the war broke out, not a member of the old boys club.  (2) He was Australian, not British, and used innovative tactics not found in the approved manuals. (3) He was an engineer, not a cavalryman, and entirely too intellectual for the British Army. (He was also fluent in German)  (4) And the reason he wasn't welcome in their officers' clubs, he was a (nonpracticing) Jew.  if you Google him, you will likely find Monash University, named after him, and the town of Monash, built by him.  Several of his concrete bridges are still in use. He was also active in civic affairs, like veterans affairs and the Boy Scouts. 

User Rank
actor James Hong
RogueMoon   7/25/2013 9:52:27 AM
American actor, James Hong, studied to be a civil engineer at USC.  He recently starred as "Grandpa Chen" in the movie RIPD.  I remember him best as "David Lo Pan", the villian in Big Trouble in Little China".  He also did a hilarious bit part in an episode of "the Drew Carey Show".

User Rank
Setting the record straight
leaton10   6/14/2013 9:03:06 AM
I would like to set the record straight. Jimmy Carter is not an engineer!

I am a Georgia Tech alumnus. Many years ago shortly after Jimmy Carter

left office, the faculty of Ga Tech decided to honor Jimmy Carter by granting him

an honorary engineering degree, due to the fact that he attended Ga Tech for a very short period long ago. I believe it was on quarter. He transferred to a military
 school after that.

When the alumni of Ga Tech got wind of the honorary degree there was a large outcry. So the administration of Ga Tech, in order to preserve the peace, agreed to in the future only consider US presidents with a history at Ga Tech for honorary degrees.

So I repeat - Jimmy Carter has an unearned lambskin - his degree was given to him as part of a ceremony only. It is a degree in Nuclear Engineering.

It should be obvious if you hear him discuss it, he calls it 'nucular' engineering.

Charles Murray
User Rank
Re: We need more
Charles Murray   5/17/2013 6:45:53 PM
I wholeheartedly agree with your comment, "The biggest impediment to the operation of the law of supply and demand in engineers is that all engineering degrees are hard work," jpratch. As John Sununu put it, "No amount of glibness will get you through a thermodynamics exam." It's a hard degree to get.

User Rank
Re: Blockbusters
JerrySteiger   5/16/2013 3:19:02 PM
Pol Pot studied reputedly studied electrical engineering in France, but never gradutated. 

User Rank
Re: We need more
jpratch   5/16/2013 9:38:42 AM
"The law of supply and demand would seem to indicate that there would eventually be a surplus of engineering grads, and the starting salaries would drop due to an influx of students migrating to engineering. But that never seems to happen."

The law of supply and demand is sensitive to the "cost of the degree". The reality is that many engineering schools now take five years to complete. This makes an engineering degree 25% more costly than other fields.

Better engineering schools have higher tuition costs, although a mix of commumity college and engineering school can mitigate under some circumstances. But the engineering curricula makes transfer from community college more difficult since foundational engineering and science courses are introduced sophomore year.

The biggest impediment to operation of the law of supply and demand in engineers is that all engineering degrees are hard work! Some fields are "only" difficult, but most are just plain challenging. Folks who "hated trig" or "hated physics" in High School are probably ill suited to taking on an engineering degree in College.

Page 1/7  >  >>
Partner Zone
More Blogs from Electronic News & Comment
There's good news and bad news regarding the sub-systems of today's late-model vehicles. The good news is that new engines and transmissions are more trouble-free than in the past. The bad news is that the infotainment and DVD players are still prone to be "buggy."
Government fines and recalls are heightening the need for automakers to adopt more safety standards and software verification techniques, experts at EE Live said this week.
The coming era of self-driving cars will call for a major change in engineering culture, an embedded design expert said this week.
For decades, the corporate path to the chief executive's office has often passed through engineering. Automotive, computer, electronics, and oil companies have frequently drawn their leaders from the engineering ranks.
The Texas Motor Speedway has flipped the switch on a high-definition video board that uses 14 million LEDs, weighs more than 200,000 pounds, and is 80% larger than the Dallas Cowboys' world-renowned scoreboard.
Design News Webinar Series
3/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
2/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
12/18/2013 Available On Demand
11/20/2013 Available On Demand
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Apr 21 - 25, Creating & Testing Your First RTOS Application Using MQX
SEMESTERS: 1  |  2  |  3  |  4  |  5

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: April 29 - Day 1
Sponsored by maxon precision motors
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service