If you're a hard-core, dyed-in-the-wool gadget freak, Popcorn, Indiana LLC may have a design task for you.
The maker and seller of snack foods recently introduced the Popinator, which it calls a "fully automated, voice activated popcorn shooter." In videos, the device reacts to the spoken word "pop" by launching a kernel of popcorn into someone's mouth.
It's supposed to be a novelty -- a modern-day, mechanized version of the Pet Rock. And public reaction to it has been virtually off the charts. A YouTube video from the company (at the bottom of this post) has drawn 1.7 million hits. National and local television news shows have featured it, and newspapers around the country have written about it.
Popcorn, Indiana calls its Popinator a "fully automated, voice activated popcorn shooter." (Source: Popcorn, Indiana)
The problem with the machine is it doesn't work -- at least not in the way described in the company's video. "It does shoot popcorn, but it is remote-operated, not voice," Amanda Tiberi, marketing coordinator for Popcorn, Indiana, told us in an email. "It does exist, but only one, and it is a prototype in our office."
The video claims otherwise. "The Popinator uses a binaural microphone system, which is similar to the way the human hearing system works," says Ted, an electrical engineer seen in the video. "Basically, it is able to calculate, using the small differences in the arrival time of sound waves and their reflections, where a sound originated from."
Technically, Ted's description sounds good. But when a CNN reporter tried to use the device, it launched popcorn all over the floor. And it didn't react to the word "pop." It wasn't clear if the binaural microphones were even installed.
Of course, Popcorn, Indiana's idea -- post an embellished video on the Web, wait for it to go viral, and reap the name-recognition benefits -- isn't new. In truth, it's no different from what Volkswagen did this year with the Hover Car we discussed in June. In terms of plausibility, however, the Popinator and the Hover Car are in different leagues.
Randy Frank, an expert in sensing technology, told us it would be feasible for the Popinator to have a binaural MEMS audio sensor, which is often used in smartphones. Moreover, there's no reason the device couldn't find the source of the sound and launch a kernel in the appropriate direction. "Using a reasonably sophisticated software algorithm and some sensor fusion, you can make that projectile travel accurately to the direction of the sound."
The project could be expensive and could have its challenges. "Any time you do voice activation, you have to worry about false triggers," he said. "You don't want this thing shooting popcorn at your dog every time it barks, and that takes some engineering expertise. It's not trivial."
Can it be done? Popcorn, Indiana (which, by the way, is located in New Jersey) isn't asking for our help. But we encourage readers to weigh in with a comment. After all, who hasn't dreamed of owning a voice-activated machine that shoots popcorn into your mouth?
Thanks for that clip. It really looked in keeping with the SNL style. Maybe they purposely filmed it that way. Even if the machine was ready for prime time in terms of design and manufacturing ability, I really don't see any kind of market for this behind the goof factor of fraternity's and maybe tech startups where they can put the Popinator to work and down the popcorn with a side of Jolt.
Couldn't find video from Saturday Night Live, but did find this mention of the Popinator on SNL Weekend Update in September:
SETH MEYERS – "A new device is being sold called the "Popinator," which is a voice-activated popcorn machine that launches a single piece of popcorn into the user's mouth. The device is activated by the phrase "I'm so lonely.""
Cool video, but I can understand why this gadget is not ready for prime time. For one, the algorithm would have to measure individual voices at various distances to determine the trajectory. Even so, it looks like the only configuration is the velocity of the kernel. And that would vary depending on each kernel. Popcorn kernels are certainly not uniform.
So, Jon, would it respond to the gurgling sound you make when your mouth is full? This could get complicated, although I think there is a chip for that.
Good grief, it would take all night to eat popcorn one popped kernel at a time. I go for a big tub and eat it by the handful. Maybe the Popinator could "shoot" a burst of popcorn at a time.
Randy Frank may be onto something when he says that a barking dog could potentially trigger this machine (if it actually existed in real ife). It's safe to say that it wouldn't take long for the dog to figure out that it gets a tasy treat everytime it barks.
Beth, I agree, this would definitely be in a hit in the dorms. Throw in the beer-throwing fridge (over 21 only, please), and you'd be the most popular kid on campus!
Actually, the system to detect the sound and figure out where to put it should not be too difficult. On the other hand, variability in the popcorn itself could pose a problem, I would think.
At first after seeing the video, I thought you might have stumbled across something that could be a Saturday Night Live skit. Then I thought, those offices. Pretty cushy for a bunch of young folk that should essentially be operating out of someone's garage if that was their sole offering. Then I realized this is a project orchestrated by a popcorn manufacturing company. (Love their products, BTW--the kettle corn flavor is awesome!). Any way, I guess the Popinator is cool in concept and maybe even innovative if it does indeed incorporate some of that more novel sensing and voice activation technology. But changing the way people eat popcorn and getting them to shell out bucks for a machine like that. Maybe in a dorm room, but I prefer the bag just fine, thank you very much.
With LEDs dropping in price virtually every year, automakers have begun employing them, not only on luxury vehicles, but on entry-level models, as well.
Using almost 200 light-emitting diodes in the front and back of the new 2014 CTS, Cadillac designers are showing how LEDs can change the character of a vehicle.
We recently posted an online slideshow called, “18 People You Didn’t Know Were Engineers.” Within hours of its publication, readers began to suggest names of other luminaries -- astronauts, politicians, athletes and actors -- who were educated or had worked as engineers.
In yet another sign that hydrogen is creeping into the consciousness of global automotive designers, sports car maker Aston Martin plans to run a hydrogen-fueled vehicle in a 24-hour Grand Touring race later this month.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
12 
