HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Blogs
CAD/CAM Corner

3D Printing With Sugar

View Comments: Newest First|Oldest First|Threaded View
<<  <  Page 4/5  >  >>
3drob
User Rank
Platinum
Brilliant
3drob   6/6/2013 9:52:19 AM
NO RATINGS
Finally, 3D printed objects I can really sink my teeth into.

Cake icing seems more manageable as an edible printing material (more like the meltable plastic string).  I would think chocolate would take too long to solidify (although you could print molds for it with a regular plastic printer).  I'd love to see a picture of their printer to get a better idea of the technology.

But (unfortunately) if they print customer's models, i couldn't see it on their web site (but sometimes internet doesn't work so well where I am).

NadineJ
User Rank
Platinum
not new and not interesting
NadineJ   6/6/2013 9:40:05 AM
I think this is one of the least interesting applications for 3D printing covered here...and, there have been several covered here.

Making more fun stuff from food is not innovation.  IMHO, it's wasteful. 

andrewj777
User Rank
Iron
Re: How does it work?
andrewj777   6/6/2013 9:22:26 AM
NO RATINGS
It's been done before! http://www.evilmadscientist.com/2007/solid-freeform-fabrication-diy-on-the-cheap-and-made-of-pure-sugar/

In the ancient days of 2007 it was done. In 2009 they came out with a new version. I think they have plans to build your own.

William K.
User Rank
Platinum
Re: Printed chocolate has gotta be coming
William K.   6/6/2013 9:14:59 AM
NO RATINGS
Rob, I am certain that I have seen a write-up about a chocolate printing process, within the last year, I think. So your idea is certainly valid. But I think that it dispensed a thin stream, not drops.

As for 3D printing with sugar, it would take a thin stream of granules and just enough IR to melt the outside of the grains, so the process control would need to be very tight. Not a real problem, except for finding the exact parameters. Adding any solvent would certainly lead to almost instant jamming because wet sugar is so very sticky. Really, the serious challenge would be in the feeding at a consistant rate. Of course it might just feed one grain at a time, but do it quite rapidly. 

William K.
User Rank
Platinum
Re: Confection on the range
William K.   6/6/2013 9:06:56 AM
NO RATINGS
That would lead to the ultimate sugar shot, I suppose.

OLD_CURMUDGEON
User Rank
Platinum
Edible Desserts, etc.
OLD_CURMUDGEON   6/6/2013 9:02:38 AM
NO RATINGS
Here in the Tampa Bay area I see quite frequently a brightly decorated van with the logo & description of EDIBLE DESSERTS.  The van artwork shows various fruits re-formed into figures, etc.  So, it would seem that although this 3-D printing is something new, this concept is not new.  I'm sure that there are small businesses sprinkled throughout the land that offer this service also.

Corona Rich
User Rank
Iron
Confection on the range
Corona Rich   6/6/2013 8:38:01 AM
NO RATINGS
But...can it be used to print guns?

There's no such thing as bad publicity, you know.

D. Sherman
User Rank
Silver
How does it work?
D. Sherman   6/6/2013 8:37:41 AM
NO RATINGS
It's a neat idea and application, and I can understand the inventers wanting to keep it secret, but I'd still like to know how they do it. Given that they start with granulated sugar and end up with granules stuck together, it's some sort of sintering process. With sugar, that could involve either heat or a solvent (water). It seems like heat would carmelize the sugar, but perhaps not. In any case, that would be similar to the laser sintering used for 3D printing metal parts from powdered metal.

A solvent-based sintering process would be more interesting because I'm not aware of that being used in any 3D printing systems to date. Solvent sintering could open up a lot of new applications. It could provide an alternate method of making plastic parts, compared to the plastic wire extrusion that is common. I could also see it used to make intricate structures of water-soluble or other chemicals for use where a large surface area as well as mechanical strength is needed, such as in batteries and catalysts. A chemist may even be able to devise a process by which some chemical reaction takes place as the particles are adhered together with the solvent.

I must say I was disappointed with their website. It's very minimal, it doesn't work well, and the pictures, that are almost entirely close-ups, don't really show much.

TJ McDermott
User Rank
Blogger
Re: Printed chocolate has gotta be coming
TJ McDermott   6/5/2013 11:00:10 PM
NO RATINGS
Rob, it's here already.

http://www.movingbrands.com/innovation/advent

Please excuse me - I have to go print dessert.

Charles Murray
User Rank
Blogger
Re: Printed chocolate has gotta be coming
Charles Murray   6/5/2013 6:51:58 PM
NO RATINGS
I agree, Rob. Weddings, anniversaries, birthdays, graduations -- this idea could be a moneymaker.

<<  <  Page 4/5  >  >>
Partner Zone
More Blogs from CAD/CAM Corner
IBM announced it is dedicating $3 billion of funding over the next five years to research and development of new processor technologies.
Micro Python is priming the presses. After smashing its Kickstarter campaign, the programming platform is almost ready to release its Micro Python boards into the public market.
Theorem Solutions recently announced the release of its newest software solution: Publish 3D. The program enables direct translation between CAD software and the PDF format, allowing engineers to spend more of their time doing what they do best -- creating.
University of Houston researchers created DermoScreen, an app that can detect skin cancer via a smartphone.
The MOD-t 3D printer, from New Matter, is a low-cost printer that is easy to use and one of the cheapest yet. Cookie Caster lets a user design his or her own cookie cutters and have them made. It's the cloud at work!
Design News Webinar Series
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
7/17/2014 11:00 a.m. California / 2:00 p.m. New York
6/25/2014 11:00 a.m. California / 2:00 p.m. New York
5/13/2014 10:00 a.m. California / 1:00 p.m. New York / 6:00 p.m. London
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Jul 21 - 25, Design Products With Bluetooth Low Energy
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: August 12 - 14
Sponsored by igus
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service