While some hobbyists are rapidly prototyping items and objects from 3D printers, others in the medical field have taken that tool to a whole new level in printing out actual implantable tissue and even organs that could prolong life.
In the last few years, medical science has used 3D printers to replace damaged tissue (skin) or to restore limbs for those who have suffered wounds. While the procedures used so far are astounding in concept, they can't quite compare to what scientists from the Wake Forest Institute for Regenerative Medicine are developing using a hybrid 3D printer.
The group has recently made advances in simplifying the printing process for creating implantable cartilage-constructs that could be used to help regrow damaged cartilage in areas such as joints. This advancement was due in part by creating a hybrid 3D printer, which makes the overall process easier and is the combination of an ink jet printer and an electrospinning machine.
These two pieces of technology combined is the key to creating the cartilage-constructs as it combines both synthetic (for strength) and natural (gel used to promote healthy cell growth) materials. The scientists used the electrospinning machine to generate an electrical current through polymer solution to create very fine fibers. The process allows the scientists to control the composition of the polymers, which coalesce into porous structures and allows the cells to integrate into the surrounding tissue.
Click the image below for more images of the hybrid 3D printer fabricating implantable cartilage.
Wake Forest Institute for Regenerative Medicine used a hybrid 3D printer to fabricate implantable cartilage on the heels of printing a working kidney. (Source: Wake Forest Institute for Regenerative Medicine)
They tested their findings using layered flexible mats of electrospun polymer, which were combined with a solution of healthy rabbit ear cells deposited using the ink jet printer. The resulting constructs were then stress-tested for strength using variable weights, which were found to be robust and still alive after one week of testing. These constructs were then introduced into living mice in a controlled environment for two, four, and eight weeks to analyze how they would function in a living system. After eight weeks, the constructs developed the structures and properties of that of elastic cartilage, which is promising for use in human patients.
The Wake Forest scientists haven't limited their study and development to just cartilage. They are looking into developing bio-printing of dental implants, prosthetics, and organs, as well. According to the scientists, development of printing dental implants is progressing considerably. An implant can be fabricated using a digitized intra-oral scan to gain a blueprint of sorts, which can be emailed to a dental lab for precise printing of the patient's teeth. Not only is the process significantly cheaper, but it can be done quicker than any past method.
The same can be said for advancements in prosthetic limbs using 3D printing technology. Until recently, prosthetics were fabricated by shaving a piece of foam into the approximate form of a patient's limb and transformed into a mold where a polymer representation is then fabricated. This is not only time consuming, but also expensive, as well as painful to the recipient. Companies such as Bespoke Innovations have capitalized on this technology to custom print artificial limbs based upon the patient's dimensions. The company first interviews the customer to get an overall picture of their personality, such as interests, and can then manufacture a completely one-of-a-kind limb made from a myriad of materials, colors, and designs to suit the individual needs of the customer.
Increased developments in 3D printing technology for bio-printing soft-tissue organs are on the rise, as well. Several scientific institutions are developing methods to bio-print transplantable organs, but their core outcomes involved are relatively the same. The process of bio-printing organs starts with a culture of replacement tissue, which is taken directly from the patient. This culture is then printed layer by layer, which eventually becomes a three-dimensional structure. Recipients of the newly-printed organs have a reduced risk of their immune system rejecting the organ, as it's made from their own cells rather than using a replacement organ from a donor. While bio-printing technology is still in its infancy, there have been great strides in achieving the lofty goal. Wake Forest succeeded in printing fully functional miniature kidneys that were able to filter blood and produce diluted urine back in 2003. The scientists have since been trying to develop even more sophisticated miniature kidneys, as well as scaled versions of a heart, liver, and even a uterus in an effort to successfully bio-print full-sized organs in the future. This could lead to longer living as limbs and organs could be replaced on a regular basis through a system of interchangeable, organic parts.
Wow, all of this seems really futuristic and sci-fi, but it makes sense--if you can create other synthetic materials with 3D printers, why not use them to replicate synthetic human tissue or body parts? It still conjures slightly gruesome images of body parts being made via an assembly line or something like that! But if it represents a breakthrough for the medical industry and a better quality of life for patients, then it's a welcome innovation.
This procedure could lead to some outstanding future medical aadvances. The kidney reproduction should be pursued as there is a vast market for kidney replacements. I have a son who has waited 4 years for a donor with no results. He is on two donor lists. Reproducing a kidney from a patient should lessen teh problem of rejection and not limit donated kidneys to younger patients.
This procedure could lead to some outstanding future medical aadvances. The kidney reproduction should be pursued as there is a vast market for kidney replacements. I have a son who has waited 4 years for a donor with no results. He is on two donor lists. Reproducing a kidney from a patient should lessen teh problem of rejection and not limit donated kidneys to younger patients.
This procedure could lead to some outstanding future medical aadvances. The kidney reproduction should be pursued as there is a vast market for kidney replacements. I have a son who has waited 4 years for a donor with no results. He is on two donor lists. Reproducing a kidney from a patient should lessen teh problem of rejection and not limit donated kidneys to younger patients.
Elizabeth - the science is there or will be shortly. As far as the 'gruesome' that's on us, the humans, to keep in hand. "Just because we can, doesn't mean we should." - but you probably know this already.
I am personally interested in the organic cartilage--had an ACL replacement done on my right knee in '88, after 2 previous arthroscopes to trim damaged cartilage. It is getting to the point of having bone on bone contact, so when this procedure is FDA certified, I'll most assuredly look into having it done.
Yet another medical implant made with a 3D printer, following the titanium jaw, as well as lots of dental implants, DN has covered previously. Looks like Wake Forest U is at the leading edge of some of this R&D.
Agree in terms of the "just because we can doesn't mean we should." Remember when cloning was all the rage and there was much controversy over cloning sheep and the possibility of cloning humans? Though I'm sure cloning is still being researched widely, the furor seems to have died down and humans seem to have fallen on the side of ethics rather than science...or have they??
This is very impressive, and a good example of why engineers should study biology. The last time I took a biology class was in 9th grade -- I managed to make it all the way through college and graduate school in engineering without learning much of anything about living things. This is a real problem, since so many of today's engineering innovations are either biomedical in nature or biologically-inspired.
I think the "gross" factor comes with the territory, to a certain extent; it's something that medical students have to learn to get over. Intellectually, I don't think there is anything "gruesome" about body parts being made on an assembly line, especially if they will help people to have a better life. But on an emotional/gut level, it does seem kind of creepy.
The 3D printing revolution seems to have a knack for quickly moving technology ahead by way of collaborative effort and even a little friendly competition -- all of course in the name of scientific advancement.
Laura Sapiens' Ego! Smartmouse offers users a unique interactive experience by providing 2D and 3D connectivity, hardware identity authentication, data storage, and more.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
