Michael Waltrip Racing is fresh off a spate of recent wins and its best season since its 2007 inception as a NASCAR racing team. Along with rising stars Clint Bowyer and Martin Truex Jr., who helped earn the team its first two Chase for the Sprint Cup berths, Michael Waltrip Racing is crediting changes to its aerodynamics design process as a key to its new competitive edge.
Likening the cutthroat competition of NASCAR to a "arms race," MWR aerodynamics manager Andy Hogg told us testing through digital simulation better prepares his team for battle. "Speed is crucial and not just on the track," he said in an interview. "Design speed is a critical measure of our success."
Michael Waltrip Racing's secret weapon coming off of its competitive NASCAR racing season is the combination of CD-adapco's Star-CCM+ CFD tools and wind tunnel testing. (Source: Michael Waltrip Racing)
MWR's traditional aerodynamics design processes were not that nimble, according to Hogg. The organization is tasked with making 35 cars a year to compete and it's always relied heavily on wind tunnel testing to explore different design ideas for modifying the standard NASCAR design to get a leg up on the competition.
The problem with that approach was that the team was limited in terms of how many ideas it could try out in the wind tunnel, and it was really a matter of guesswork as to which ones had the best potential, Hogg said. "Without CFD, we didn't really understand the flow characteristics of the car so it was hard to make changes that worked," he said. "It was more of a guess and check."
Today, while it doesn't use the wind tunnel any less (MWR tests about 30 design changes per month in a wind tunnel), it does employ the technology differently -- specifically, in a more intelligent fashion. Leveraging cd-Adapco's Star-CCM+ Computational Fluid Dynamics (CFD) software, MWR engineers now run all possible ideas through digital simulation to prove out their viability before hitting the wind tunnel with a select few for validation. Hogg said:
Before, we had more ideas than we could test, but we would just guess at the ones with the most potential. Today, we might run through 60 ideas a month in simulation and pick the best 30 from CFD. It gives us a much better shot of them working out in the wind tunnel.
While the NASCAR teams work off a standard design, Hogg said there's a huge amount of tweaking and refining of parts and small improvements every week to get that tiny leg up on the competition. "People don't realize how much innovation and rate of improvement determines a team's success during the season," he said.
Having the flexibility to fully explore a range of possible design options in the digital world is critical for a team that is a relative newcomer in the competitive and well-established world of NASCAR. Moving forward, Hogg expects to take advantage of cd-Adapco's cloud-based simulation capabilities, especially when the new car body design for next year is announced in the next couple of weeks. Cd-Adapco's Power-on-Demand offering lets customers run Star-CCM+ in a cloud-based session using on-demand cloud computing services like Amazon EC2. Running CFD simulation in the cloud will allow a bunch of design work to be done in parallel, Hogg said, which is critical to achieving that edge right out of the gate:
We already have time on [cd-Adapco's] cloud offering on hold, and as soon as we get the go-ahead that this is the package, we're going to swamp the cloud with simulations -- way more than we could ever do on our own hardware. That gives a short-term burst (for simulation), which we couldn't afford to maintain all year round.
Beth, right after the SIM Center moved from Mississippi State to UT Chattanooga, the Center arranged an open house for engineers interested in learning more about CFD. I went. The prospect of combining fluid dynamics with CAE really fascinated me. I was blown away by the capability of the software and the modeling techniques. The first demonstration used a tractor/trailer combination and modeling air flow around the cab and trailer at various speeds. The second model demonstrated air flow around an F- 18 Hornet and how that air flow varied when airfoil surfaces came into play. The graphics were absolutely stunning. One thing I came away with was the close correlration between model and reality. In the "old days", reality was hard to come by due to issues with the mathematical algorithm. An approximation within 25% was considered to be "state-of-the-art". Times have really changed.
Thanks for the added detail, Bob. You're absolutely right about the challenge of modeling to reality, however. While your 25% percent approximation figure has been greatly improved with the latest technology, it's still one of the challenges around CFD and simulation in general.
NASCAR is one of the most interesting "playgrounds" for engineering and cutting edge tools. Before I became a NASCAR fan, I thought they just got a showroom car and put a huge motor in it. Oh no, so much more! Design of roll cages and frames for driver safety, spring rates and shock response under varying conditions, engine building and tuning, aerodynamics. etc. F1 racing seems to have more electronic control over various parameters while the car is on the racetrack, while also using engineering applications in the design and test phases. A lot of engineers have found their "happy place" in the world of motorsports.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
16 
