Michael Waltrip Racing is fresh off a spate of recent wins and its best season since its 2007 inception as a NASCAR racing team. Along with rising stars Clint Bowyer and Martin Truex Jr., who helped earn the team its first two Chase for the Sprint Cup berths, Michael Waltrip Racing is crediting changes to its aerodynamics design process as a key to its new competitive edge.
Likening the cutthroat competition of NASCAR to a "arms race," MWR aerodynamics manager Andy Hogg told us testing through digital simulation better prepares his team for battle. "Speed is crucial and not just on the track," he said in an interview. "Design speed is a critical measure of our success."
Michael Waltrip Racing's secret weapon coming off of its competitive NASCAR racing season is the combination of CD-adapco's Star-CCM+ CFD tools and wind tunnel testing. (Source: Michael Waltrip Racing)
MWR's traditional aerodynamics design processes were not that nimble, according to Hogg. The organization is tasked with making 35 cars a year to compete and it's always relied heavily on wind tunnel testing to explore different design ideas for modifying the standard NASCAR design to get a leg up on the competition.
The problem with that approach was that the team was limited in terms of how many ideas it could try out in the wind tunnel, and it was really a matter of guesswork as to which ones had the best potential, Hogg said. "Without CFD, we didn't really understand the flow characteristics of the car so it was hard to make changes that worked," he said. "It was more of a guess and check."
Today, while it doesn't use the wind tunnel any less (MWR tests about 30 design changes per month in a wind tunnel), it does employ the technology differently -- specifically, in a more intelligent fashion. Leveraging cd-Adapco's Star-CCM+ Computational Fluid Dynamics (CFD) software, MWR engineers now run all possible ideas through digital simulation to prove out their viability before hitting the wind tunnel with a select few for validation. Hogg said:
Before, we had more ideas than we could test, but we would just guess at the ones with the most potential. Today, we might run through 60 ideas a month in simulation and pick the best 30 from CFD. It gives us a much better shot of them working out in the wind tunnel.
While the NASCAR teams work off a standard design, Hogg said there's a huge amount of tweaking and refining of parts and small improvements every week to get that tiny leg up on the competition. "People don't realize how much innovation and rate of improvement determines a team's success during the season," he said.
Having the flexibility to fully explore a range of possible design options in the digital world is critical for a team that is a relative newcomer in the competitive and well-established world of NASCAR. Moving forward, Hogg expects to take advantage of cd-Adapco's cloud-based simulation capabilities, especially when the new car body design for next year is announced in the next couple of weeks. Cd-Adapco's Power-on-Demand offering lets customers run Star-CCM+ in a cloud-based session using on-demand cloud computing services like Amazon EC2. Running CFD simulation in the cloud will allow a bunch of design work to be done in parallel, Hogg said, which is critical to achieving that edge right out of the gate:
We already have time on [cd-Adapco's] cloud offering on hold, and as soon as we get the go-ahead that this is the package, we're going to swamp the cloud with simulations -- way more than we could ever do on our own hardware. That gives a short-term burst (for simulation), which we couldn't afford to maintain all year round.
Beth, this is where CAE codes make a big difference. It is possible to explore a large part of the design space in the computer. This gives the design team the ability find optimal, or near optimal, parameters for their rel-world testing.
Another interesting aspect is the cloud for CFD. These are highly parallel simulations that seem more amenable to massive parallel solutions. It is also interesting to see that this is a public cloud solution.
Wind tunnel testing is necessary in order to validate the results. Remember Microsoft's Excel math mistakes? If an error like that crept into CFD calculations, the results could get "interesting".
This is a great use of simulation, Beth. Incredibly improved efficiency. This same approach is getting used in building plants and setting up systems. simulation prior to build is saving both time and money.
@TJ: Wind tunnel testing is definitely still necessary, no doubt. What the team at Michael Waltrip is saying it that by leveraging simulation (and eventually even more high performance compute horsepower offered by the cloud), they can test out more possibilities and then use the wind tunnel testing (which is limited due to budgets) for validation of the best designs. Helps them explore more possibilities more efficiently and cost effectively--a refrain I hear consistently from simulation users.
Interesting analogy...NASCAR is like an "arms race". Of course the arms race is within the rules, and it depends on how the drivers and teams perform during the race. The competition is cutthroat, and that's part of the reason for NASCAR's popularity.
As for aerodynamics, it definitely plays a big role on the longer faster tracks. A damaged car body at Daytona or Talladega can rarely keep pace with the front runners, aerodynamics is just too critical at 190-210 miles per hour. Many non-fans have noticed the NASCAR "drafting", where at high-speed, two or more cars lined-up are faster than one car alone.
Watch the NASCAR race at Talladega Superspeedway (2.66 mile tri-oval with 33 degree high-bank turns) this Sunday (Oct 7th) to see why aerodynamics is so important in high-speed races. There is usually a huge number of lead changes during the race, 50 or more lead changes is not uncommon. The race record is a 188 mph speed average, qualifying record 212 mph. Frequently there is last lap passes to win the race, as the driver's know how to use aerodynamics to make passes ("overtaking" for you F1 people).
@RICKZ28: The arms race analogy is certainly different, but the Michael Waltrip team's choice of words, not mine. And you are right, aerodynamics is a huge design challenge for these racing teams. In fact, there are many, many stories about other race car teams leveraging advanced simulation software to do more of the same. Interesting, because these teams are out in front in terms of how they're incorporating simulation into their design workflows compared with many engineering organizations in traditional companies.
Michael Waltrip was going for the win on the last lap of the race at Talladega Superspeedway (Sunday, Oct 7, 2012)...so he did a good job in putting himself in a good position at the end of the race. Unfortunately, he got caught-up in a huge last lap crash, finished 25th.
I did enjoy the 54 lead changes during the 500 mile race (and that's only "official" lead changes at the start/finish line), as well as the fast 171 mph average speed. The high-speed race was all about the use of aerodynamics, including drafting.
Beth, one of the most fascinating demonstrations I have seen in the recent past was given by the SIM Center at the University of Tennessee at Chattanooga. It was a demonstration of the power of CFD in investigating air movement around 18 wheelers traveling at varying speeds. Grant money was furnished by the National Highway Traffic Safety Administration (NHTSA) and Peterbuilt. As a part of the demo, we were able to see how variations in cowling and "hardware" made differences in air patterns slipping over exterior surfaces of the cabs and trailers. I'm sure NASCAR could benefit from CFD and save hundreds of hours devoted to "cut and try". Great article.
Thanks Bob. That sounds like quite an informative presentation. May I ask what the purpose of the demonstration was and who the audience was? Was it's purpose to promote CFD specifically?
The 3D printing revolution seems to have a knack for quickly moving technology ahead by way of collaborative effort and even a little friendly competition -- all of course in the name of scientific advancement.
Laura Sapiens' Ego! Smartmouse offers users a unique interactive experience by providing 2D and 3D connectivity, hardware identity authentication, data storage, and more.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
9 
