Both printers also feature MakerWare, new software for driving the Replicator printer. Touted for its simple GUI and ability to load multiple STL or OBJ files simultaneously, MakerBot officials said it's easier to get more models printed faster, while also simplifying the process of choosing print settings and moving, rotating, and scaling models as they are readied for printing. In addition, MakerWare's new slicing engine is up to 20 times faster than its predecessor -- another capability officials said will facilitate the output of 3D models.
Besides the new printers, MakerBot launched an interesting twist in its marketing and distribution strategy -- one it hopes will help make the consumer case for 3D printing. The company opened a flagship retail location in Manhattan, where it will not only sell 3D printers, but also 3D printed gifts and accessory, in addition to providing demonstrations and packaging up what it calls "the full MakerBot experience" as a way to get more people introduced to the ins and outs of 3D printing.
And MakerBot isn't alone is trying to mimic Apple's wildly successful retail strategy and put 3D printing on the map for a wider audience. Diego Porqueras, the maker of the Bukobot open-source 3D printer, just opened the doors to Deezmaker, a retail store in Pasadena, Calif. Deezmaker, set in a local strip mall, will sell the Bukobot and potentially other 3D printers along with parts and other 3D printing-related products. Porqueras is hoping that his location, within walking distance from CalTech and a short drive from NASA's Jet Propulsion Lab, will do a lot to help his 3D printing cause.
Vapors of most heated plastics are very toxic! Check with any chemist who does not work for the plastics or pesticide industries. Treat this process with the same respect you would auto exhaust or petroleum-based solvents, since that is essentially what these materials are. Good ventilation is a must!
Here's an example of PLA being used for large-scale 3D printing of architectural structures: http://www.smartplanet.com/blog/design-architecture/in-amsterdam-worlds-first-mobile-3d-printing-pavilion/8736
I've been working on a feature on 3D printing and 3D content creation tools (stayed tuned in November) and I've been talking to a lot of engineers who use the lower end 3D printers either on the job or increasingly in their home, for hobbyist/side business purposes. Consistently, most talk about some of the messiness of traditional 3D printers (I hadn't heard about the smell) and perhaps the choice of PLA is better suited to home/hobbyist use as opposed to an office or shop floor environment. What are others experience with 3D printers on the lower end? They look like office printers, but they don't seem quite as packaged. Let us know.
While I do agree that it does not use ABS, I still marvel at the price point of this 3D printer and the ever decreasing cost of this technology. I remember when the lowest price 3D printers were still well into 6-figures. I look forward to continuous technology and material improvements with these types of printers in the near future.
If PLA is supposedly so difficult to use, I wonder why it's so common in lower-end 3D printing? As Beth's article states, "PLA was chosen because of its strength and ability to make very large prints without cracking or warping." I also suspect some people are a lot more sensitive to the smell than others.
Based on what was said in that video, it is a bit surprising. I found a wiki page on Makerbot's site that provides some insight into their choice of PLA and provides some hands-on perspective from Makerbot users. http://wiki.makerbot.com/pla
Beth, thanks for finding that candid discussion on YouTube – I watched the entire thing, and now have very little faith in PLA, from what the guys were saying. In a Nutshell, its less heat tolerant, less process capable, less robust, so why would they use it-? Only because it doesn't smell as bad as ABS during processing. To me, that's a pretty weak reason for choosing a material. I've been in Injection-mold production press rooms running ABS, and while the odor there is strong, its not intolerable. Maybe the MakerBot apparatus really brings the 'Stink" out of it!
Thanks, Beth, for that video. I got about half way through it. The guy being interviewed, who designed a 3D printer kit, says PLA vs ABS is easier to print with, harder to drill, and doesn't take the high temps that ABS does. Also, that ABS's smell is really bad. He says PLA is great for prototypes, then prints the final part in ABS.
I did some googling on my own to see what others are saying about PLA and come up with this long, but interesting video on Youtube where an engineer and maker of a printer kit is talking about the tradeoffs of PLA vs. ABS and why he sees PLA as the next big thing in home printing. For what it's worth: http://www.youtube.com/watch?v=wF-w3eT0CdY
Virtual Reality (VR) headsets are getting ready to explode onto the market and it appears all the heavy tech companies are trying to out-develop one another with better features than their competition. Fledgling start-up Vrvana has joined the fray.
A Tokyo company, Miraisens Inc., has unveiled a device that allows users to move virtual 3D objects around and "feel" them via a vibration sensor. The device has many applications within the gaming, medical, and 3D-printing industries.
While every company might have their own solution for PLM, Aras Innovator 10 intends to make PLM easier for all company sizes through its customization. The program is also not resource intensive, which allows it to be appropriated for any use. Some have even linked it to the Raspberry Pi.
solidThinking updated its Inspire program with a multitude of features to expedite the conception and prototype process. The latest version lets users blend design with engineering and manufacturing constraints to produce the cheapest, most efficient design before production.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies.
You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived.
So if you can't attend live, attend at your convenience.