In one program for making replacement parts on the spot for the International Space Station, NASA is testing electron beam freeform fabrication This process, developed at NASA's Langley Research Center, makes metallic structures quickly using an electron beam gun and a dual-wire feed. It has been used to make titanium spars for the F-35 Joint Strike Fighter's vertical tails. NASA is tailoring hardware and processes to make it easier for astronauts such as Dan Burbank, Expedition 30 commander, to use. Burbank (shown here in the ISS Tranquility node) works on the atmosphere revitalization system's major constituent analyzer mass spectrometer assembly. (Source: NASA)
Defintely out of this world examples of 3D printing. Very cool that this technology is playing a role in space exploration. It really confirms how far the materials have come in terms of choice and durability/reliability that they are even an option for such serious engineering.
Yes Beth, I agree. It seems like a month or so ago we were talking about similar things and now here they are here. It just begs the imagination to think about 2 years from now or 5 or even 1 year. I knew this would be big, but it's blowing up!
Jenn, Contour Crafting's potential blows my mind. I mean, 3D printing whole buildings? It's still under development and started out as a mold-making technology for constructing large industrial parts. The inventor expanded the concept to a method for building quick emergency shelters after disasters, such as Hurricane Katrina or major earthquakes. The website says it can produce structures such as houses or larger multi-unit buildings, and that "embedded in each house [are] all the conduits for electrical, plumbing and air-conditioning." That's amazing enough, but the process is also designed to use naturally occurring local materials like clay or plaster. That's a big one--no expensive engineering-grade plastic needed. Here's the inventor giving a TED talk: http://www.youtube.com/watch?v=JdbJP8Gxqog
My initial thought about using the prototype materials was the thermal risks; meaning brittleness and prone to shattering in the extreme cold Martian temperatures. But I recalled a recent environmental test done to an SLS prototype housing. It was placed in a cold chamber at -55°C and an impact test was run, simulating a sharp impact at extreme cold. The housing was designed with a 2mm wall thickness, and the SLS didn't even dent, let alone shatter. And while Martian climate can exceed -55°C, that was the lowest limit of our chamber's capability. But I'm convinced; at least for SLS.
To me, the most amazing thing is that this technology could be used to build "infrastructure, such as roads and landing pads." It's one thing to build components that have to handl light mechanical stresses. It's another to build structural components that have to handle big loads.
SpaceX has 3D printed and successfully hot-fired a SuperDraco engine chamber made of Inconel, a high-performance superalloy, using direct metal laser sintering (DMLS). The company's first 3D-printed rocket engine part, a main oxidizer valve body for the Falcon 9 rocket, launched in January and is now qualified on all Falcon 9 flights.
Lawrence Livermore National Laboratory and MIT have 3D-printed a new class of metamaterials that are both exceptionally light and have exceptional strength and stiffness. The new metamaterials maintain a nearly constant stiffness per unit of mass density, over three orders of magnitude.
Smart composites that let the material's structural health be monitored automatically and continuously are getting closer to reality. R&D partners in an EU-sponsored project have demonstrated what they say is the first complete, miniaturized, fiber-optic sensor system entirely embedded inside a fiber-reinforced composite.
The amount of plastic clogging the ocean continues to grow. Some startling, not-so-good news has come out recently about the roles plastic is playing in the ocean, as well as more heartening news about efforts to collect and reuse it.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.