Wind Power Operating, Maintenance Costs Drop 38 Percent
The costs of wind power are falling, not only for turbine cost and performance, but also for operating and maintaining wind farms. Shown here, Siemens service engineers work in a wind turbine's gondola. (Source: Siemens)
The best projections of the viability of intermittant renewables such as wind and solar are around 10-15% of the available power required. As others have said, it simply needs storage to get past that 15%. I love reneawables, but I acknowledge the problem.
I am glad to see that the price is dropping, but you did not say anything about storage. How can wind generation amount to more than a couple percent without some way to store the generated energy? When the wind stops, is it not true that the generator draws energy from the grid to keep it warm, to spin it up as the wind increases, control circuits, etc.? And with absolutely no energy storage there must be a coal /gas / ?? always running at 100% to pick up the complete load within a couple cycles of the wind dropping (or cloud crossing the sun).
Without storage solar and wind (even if the hardware were free) can never amount to more than 10% of energy needs. True, we could put up enough generators and solar panels to cover all demands... momentarily, but night comes when no panel works, and days come when even the Santa Ana winds don't blow.
You make a good point. The ROI increases as more users/buyers invest. I'm curious to know how the savings break down. Has the initial cost dropped significantly or just operating? Or, is long-term maintenance where the significant savings are?
Where the savings lie makes a difference for future investors.
And, on a separate note, better design would help lesson the NIMBY factor. Many communities still fight against wind farms as a visual blight.
Thanks, Rob, I agree about the good news. I find Jerry's input about what I expected, meaning, here's a technology that's not too expensive and it's been around a long time, but has not seen mass adoption. I think much of the reason has little to do with economics or technology, and more to do with psychology. It's the early adopters vs the mass market, as we've seen in many industries, most notably personal electronics. And not that many people live on farms or in the country anymore.
Every time I drive through West Texas I wonder why we don't hear more about energy from wind farms - they are certainly out there and at least in Texas there are many more than a single turbine on the occasional farm...seems like these technologies have been around a long time (like solar) but are extremely slow moving. Some folks are fascinated by renewable energy and are determined to live "off the grid" but it just doesn't seem to be very popular in the mass market place...
That WT's in small sizes are not really cost effective is because of greed, bad busines model or something else as I can make them for well under $1k/kw vs the $4k/kw most units cost now.
Remember they perfected them in the 30's!!!! Many of them are still running like the Jacob's and others.
A 2k WT enough to run an eff home in an average wind site is more simple than a moped!! So why are they so expensive? I see a great market with large profits I'l be filling within a yr. I can get 200% profit and still beat the others by 50% and even beat the Chinese.
I did go into production of some in the late 70's but the market wasn't there but it is now for a quality unit.
Done right they need little maintaining other than a yrly check and new bearings every 3-5 yrs if designed and built right.
Thanks for your comment, Lou. Since most of the technical and manufacturing efforts for wind turbines right now appear to be aimed at making them in high volumes for wind farms, I'm not surprised that an individual agricultural farmer finds a single wind turbine impractical and payback is slow. It doesn't sound like the rental model is working very well for the individual farmer, but that model could, of course, be tweaked to make it more attractive and productive.
Last week, the bill for reforming chemical regulation, the TSCA Modernization Act of 2015, passed the House. If it or a similar bill becomes law, the effects on cost and availability of adhesives and plastics incorporating these substances are not yet clear.
The latest crop of coating and sealant materials and devices has impressive credentials. Many are designed for tough environments with broad operating temperature ranges, and they often cure faster, require fewer process steps, and produce less waste.
A new program has been proposed for testing and certify 3D printing filaments for emissions safety. To engineers who've used 3D printers at home this is a no-brainer. It's from a consumer on Kickstarter, and targets use in homes and schools.
For the last 50 years, the Metal Powder Industries Federation (MPIF) has sponsored an awards competition for creative solutions to designing and fabricating near-net-shape parts using powder metal (PM) technologies. Here are the seven Grand Prize winners of the 2015 contest.
Graphene 3D Lab has added graphene to 3DP PLA filament to strengthen the material and add conductivity to prints made with it. The material can be used to 3D print conductive traces embedded in 3D-printed parts for electronics, as well as capacitive touch sensors.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.