HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
REGISTER   |   LOGIN   |   HELP
Blogs
Engineering Materials

Slideshow: Smallest Dental Labs Get 3D-Printed Models

NO RATINGS
View Comments: Newest First|Oldest First|Threaded View
<<  <  Page 3/4  >  >>
Kirk McLoren
User Rank
Silver
Re: 3-D printing for dental
Kirk McLoren   4/8/2013 4:23:35 PM
NO RATINGS
18 karat or 75% gold. Less and it corrodes.

solarsculptor
User Rank
Silver
Re: 3-D printing for dental
solarsculptor   4/8/2013 1:08:14 PM
NO RATINGS
J-allen, Gold is the best metal for implants because it has zero corrosion and absolutly no rejection problems. Stainless steel can have severe corrosion issues in the body, that's why it no longer is used in joints or other critical implants. Many people are allergic to nickel alloys also, even when it is used in jewelry. Have you ever looked at a fitting on a boat or railing and witnessed "stainless Steel" rust stains?

Titanium is another premium medical metal with no rejection or corrosion problems, however if you ever worked with it, it is very difficult to machine. Your average medical lab would have problems with it and would have a steep learning curve.

bronorb
User Rank
Silver
3D Scanning?
bronorb   4/8/2013 12:31:55 PM
NO RATINGS
The article says that in a fully digital operation, impressions are no longer needed. I assume that the patient's mouth would be 3D scanned, correct? If so, what type of 3D scanner would be used for that?

jon from Portland
User Rank
Iron
Re: 3-D printing for dental
jon from Portland   4/8/2013 12:03:31 PM
NO RATINGS
Ceramics do cause a lot more wear on opposing teeth.  The main reason they are used is because most people don't want to have a gold front tooth.  People want a color matched ceramic (porcelain) for cosmetic reasons.  The gold is much less likely to chip and is tougher.  I'm not sure of the exact composition of the gold alloy used in crowns but I don't think they are even 50% gold.

Ann R. Thryft
User Rank
Blogger
Re: 3-D printing for dental
Ann R. Thryft   4/8/2013 11:47:49 AM
NO RATINGS
j-allen, that's an interesting idea. However, I wonder about the bio-compatibility of some of the alloys you mention, Also, newer alloys have been created specifically for making these dental devices, for example, BEGO's Wirconium:
http://begousa.com/Wironium_FAQ.wss

j-allen
User Rank
Gold
Re: 3-D printing for dental
j-allen   4/8/2013 11:32:19 AM
NO RATINGS
Interesting point. Of course if ceramic materials are not too hard (cause erosion of mating teeth) then i can't see why a metal would be.  As for corrosion resistance, certainly any of the high-nickel alloys would be far more than adequate.  Even the 300-series stainless steels would be fine.  Perhaps I should mention that one reason I avoid gold is for ethical reasons, considering the corrupt, polluting and vicious industries that produce most of it. 

jon from Portland
User Rank
Iron
Re: 3-D printing for dental
jon from Portland   4/8/2013 11:01:54 AM
NO RATINGS
The gold used for crowns is actually a very good material.  It is very corrosion resistant and best of all it is not too hard.  If you make a crown out of a material that is very hard it causes excess wear on the opposing teeth.  I would only choose a hard material like porcelain on one of my teeth that is very visible and a color match with adjacent teeth is critical.

j-allen
User Rank
Gold
3-D printing for dental
j-allen   4/8/2013 9:34:55 AM
NO RATINGS
Once we have a digital "image" of the crown, I would like the data to be fed to a small CNC milling machine which then sculpts the crown out of a modern corrosion proof alloy such as monel or Inconel.  This would give a permanent crown without useng over-priced "squishy" metals.  At present we use these precious alloys because they are amenable to low temperature casting, yet they are hardly ideal either mechanically nor economically. 

Elizabeth M
User Rank
Blogger
Re: Good application for 3D printing
Elizabeth M   4/8/2013 8:35:16 AM
NO RATINGS
Definitely this seems like a good fit for 3D printing by making a painstaking process more affordable and cost effective. It's good to see the little labs being able to take advantage of the innovation.

Greg M. Jung
User Rank
Platinum
Next Generation Dental Equipment
Greg M. Jung   4/5/2013 7:16:05 PM
NO RATINGS
This is a good example of how technology is really improving dental equipment so that it can be more affordable and have a smaller footprint with minimal technical training needed.  This will allow more dentists to offer a wider range of services within their existing practices and business models, which ultimately benefits the patient also.

<<  <  Page 3/4  >  >>
Partner Zone
More Blogs from Engineering Materials
3D printing has met up with drones in a 3D-printed UAV. University of Sheffield engineers printed the prototype drone in 24 hours from ABS plastic using Fused Deposition Modeling.
Some of the biggest self-assembled building blocks and structures made from engineered DNA have been developed by researchers at Harvard's Wyss Institute. The largest, a hexagonal prism, is one-tenth the size of an average bacterium.
Arevo Labs' end-production 3D printing technology for carbon composites includes a high-temperature, filament fusion printer head design and firmware for use with the company's new carbon fiber and nanotube reinforced high-temperature matrix polymers like PEEK.
Stratasys will buy Solid Concepts and Harvest Technologies and combine them with its RedEye service business. The plan takes aim at end-production manufacturing and will create one of the biggest commercial 3D printing and AM service bureaus.
The International Federation of Robotics reports that global sales of industrial robots decreased by 4% in 2012 over 2011. The biggest hit was electrical/electronics manufacturing, down by 13%; but by region, the Amerficas did well.
Design News Webinar Series
3/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
2/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
12/18/2013 Available On Demand
11/20/2013 Available On Demand
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Apr 21 - 25, Creating & Testing Your First RTOS Application Using MQX
SEMESTERS: 1  |  2  |  3  |  4  |  5


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: April 29 - Day 1
Sponsored by maxon precision motors
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service