Three-dimensional printing is being used to make metal parts for aircraft and space vehicles, as well as industrial uses. Now NASA is building engine parts with this technique for its next-generation heavy-lift rocket.
The agency says that its Space Launch System (SLS) will deliver new abilities for science and human exploration outside Earth's orbit by carrying the Orion Multi-Purpose Crew vehicle, plus cargo, equipment, and instruments for science experiments. It will also supply backup transportation to the International Space Station, and it will even go to Mars.
NASA is using 3D printing to build engine parts for its next-generation Space Launch System. Shown here is the first test piece produced on the M2 Cusing Machine at the Marshall Space Flight Center. (Source: NASA Marshall Space Flight Center/Andy Hardin)
NASA's Marshall Space Flight Center is using a selective laser melting (SLM) process to produce intricate metal parts for the SLS rocket engines with powdered metals and the M2 Cusing machine, built by Concept Laser of Germany. NASA expects to save millions in manufacturing costs and reduce manufacturing time. SLM, a version of selective laser sintering, is known for its ability to create metal parts with complex geometries and precise mechanical properties.
The SLS will weigh 5.5 million pounds, stand 321 feet tall, and provide 8.4 million pounds of thrust at liftoff. Its propulsion system will include liquid hydrogen and liquid oxygen. Its mission will launch Orion without a crew in 2017; the second will launch Orion with up to four astronauts in 2021. NASA's goal is to use SLM to manufacture parts that will be used on the first mission.
The rocket's development and operations costs will be reduced using tooling and manufacturing technology from programs such as the space shuttle. For example, the J-2X engine, an advanced version of J-2 Saturn engines, will be used as the SLS upper stage engine. Some SLM-produced engine parts will be structurally tested this year and used in J-2X hot-fire tests.
In a NASA video, Andy Hardin, engine integration hardware lead for the Marshall Space Flight Center SLS engines office, discusses the initial testing and building stages:
We do a lot of engineering builds first to make sure we have the process [worked] out. There's always weld problems that you have to deal with, and there's going to be problems with this that we will have to work out, too. But this has the potential to eliminate a lot of those problems, and it will have the potential to reduce the cost by as much as half in some cases on a lot of parts.
Since final parts won't be welded, they are structurally stronger and more reliable, which also makes for a safer vehicle.
Ken Cooper, advanced manufacturing team lead at the Marshall Space Flight Center, says in the video that the technique is especially useful for making very complex shapes that can't be built in other ways, or for simplifying the building of complex shapes. But geometry is not the deciding factor; whether the machine can do it or not is decided by the size of the part.
Jack, as mentioned below, these are very different app and technology areas. Here's a manufacturing publication article (plus comments) about industrial AM increasing the use of metals and how different these uses, and technology, are from the maker movement level of machines and materials: http://www.manufacturing-executive.com/thread/2532 And here's a DN article about industrial 3D printing with non-plastic materials: http://www.designnews.com/document.asp?doc_id=252293 There are others listed at the bottom of this current article.
I had not heard that the 3D printing capabilities had evolved beyond the prototype plastic materials. This seems to be a big step forward. Any news on multi-material printing yet?
We have been looking high an low for a way to on-board manufacture parts for the Dilithium platform orientation modules. Also, those pesky anitmatter nozzle modulators.
Greg, I agree. Using 3D printers to make rocket components is quite intriguing. I know the testing of these components are probably more stringent than with conventional manufactured parts. I know the Maker community would love to have access to one of these machines in their Makerspace!
Lou, thanks for weighing in on this one: I was curious to see what you'd say. Cabe, the stuff you've seen is probably on the consumer and prototype level 3D materials and processes, which mostly use metal, not plastic. Both materials and processes are, of course, quite different for industrial and aerospace uses, and for high-end automotive. I've heard of several stories like yours of unacceptable parts coming from vendors in the non-industrial network. It's important to know where the wall is between the two app areas.
Having NASA involved will probably speed the maturing of the 3-D printing process, since they always demand the very most reliable parts, and usually there is much less urgency about reducing costs. That is a vital difference between the space program and much of the junk produced for the "consumer" market, which has the primary target of minimum production cost. When lowest price is the prime directive and sole target, quality and reliability usually suffer. So the NASA use of 3-D printing will help gain understanding of how to produce better quality.
I am impressed with the fact that some of the process is good enough to put it inconsideration. Of course the space program is a very logical area, since the production quantities are fairly small, which makes the creation of tooling for each part much less economical.
It will be interesting to see what benefits are delivered by the NASA involvement now.
I think you are bringing up a non-issue. The whole point of the article was that NASA was evaluating the process. Having worked this industry I can assure you that the custom built machine, not the ones you may have used, will be thoroughly tested as will the process. If it can't be made to work it will be dropped. But given the payback if it can be made to work it will probably be pursued.
I have printed structural plastic parts that are still around today. Like any process for producing parts the engineer has to work with the process and not expect it to perform/behave like some other process.
I feel confident that this additive manufacturing process will evolve further just as it has over the last several years. Who knows what process development will be incorporated into parts like these to make them a viable alternative in the harsh environments of rocket propulsion systems. Nice to see the innovation that this technology is fostering.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
Engineers at the University of California, San Diego are designing a robotic arm that takes inspiration from the loose, flexible, yet very strong structure of the armored plates on a seahorse's tail.
Researchers at the Missouri University of Science & Technology have designed a new nanoscale material that can transmit light faster than the 186,000 miles per second it usually takes to travel through air.
It has often been said that as California goes, so goes the nation. This spring, the state's wind power is setting energy generation records and solar energy generation is expected to rise sharply during the second half of 2013.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 4
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
4 
