HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Blogs
Engineering Materials

Injection Molding Goes High Volume

NO RATINGS
< Previous Page 2 / 3 Next >
View Comments: Newest First|Oldest First|Threaded View
<<  <  Page 2/2
William K.
User Rank
Platinum
Re: Aluminum or Steel, and a some observations
William K.   12/26/2012 11:55:58 AM
NO RATINGS
How else can you design a part to be manufactured without understanding the capabilities and limitations of the manufacturing process? Evidently it has been done, but it doesn't make sense. It seems that others have thought differently over the years, which is probably the basis for the whole "DFM" group of consultants who try to solve problems for those designing hard to manufacture parts. 

Injection molding has been one of those areas where the first step of part design has been to determine the capabilities needed to produce the part features while designing those same features. That would determine which supplier was selected as well as what features of the part could be included. An analogy is deciding what one would ,ake for dinner based on what food was on hand and what was available to cook it with.

Theoption of including secondary operation types of actions while the part is molded is quite interesting, and it would allow a number of additional options for the initial design process.

Greg M. Jung
User Rank
Platinum
Aluminum
Greg M. Jung   12/24/2012 11:22:09 PM
NO RATINGS
Interesting point on the improved mold performance using aluminum due to its improved thermal conductivity. Do you know what type of aluminum they used? (QC-7?)

Tim
User Rank
Platinum
Moldng processes
Tim   12/21/2012 10:11:03 PM
NO RATINGS
The use of Scientific Molding is a great way to  produce repeatable parts on multiple machines.  Documentation of separation of pack and hold as well as a documented gate seal study helps to produce parts consistently on different machines.

In regards to aluminum tooling, what is the effect of glass filled reins on the aluminum mold?  Often times, it is necessary to use glass filled resins for metal replacement projects.

naperlou
User Rank
Blogger
Aluminum or Steel, and a some observations
naperlou   12/21/2012 10:19:02 AM
NO RATINGS
Ann, I assume your statement regarding aluminum or steel in the first paragraph is incorrect considering the text of the rest of the article.  It is an interesting one, by the way.  Recently there was an article on this site on Metal Injection Molding (MIM), which had a poor reputaiton, but has seen great improvements. 

One observation is about the statement about increased pressure on manufacturing.  This is a common statement, so my comment is not aimed at your article, particularly.  There would be no increased pressure without advances in science and engineering.  The statemnt seems to imply that these industries are standing still and being pushed by someone else.  In reality US industry is among, if not the most , efficient in the world. 

Another interesting point in your article is about the Scientific Molding process.  I once worked for a company that made simulators, primarily for training.  These included flight, military as well as industrial simulators.  In general, the simulators were very accurate.  They could often be driven faster than real-time.  A secondard market was found for the industrial simulators in plant control.  The simulator could run many scenarios with different feed stocks, etc.  This would allow adjustment to the process before acutally consuming anything. 

Finally, your article points out the need for design for manufacturing.  Before the move toward outsourcing, there was a move toward integration.  If you could design a part to be more easily manufactured, and you did it in the design phase, it was a very inexpensive change.  If this had to be addressed later, it would be very costly.  Perhaps we are moving back. 

I heard an example of this recently.  A manufacturer of space heaters, I think it was, brought their manufacturing back to the US.  By a small redesign, one that eliminated a lot of fasteners, they were able to lower the time to manufacture.  Since their market was mostly here, and since they could make changes to respond to market conditions more quickly, they have improved their competitiveness.  A god example, I think.

<<  <  Page 2/2
Partner Zone
More Blogs from Engineering Materials
NASA's MAVEN spacecraft has entered Mars' atmosphere, carrying instruments to help Earthlings figure out what happened to it. Launched last November, the spacecraft arrived at the red planet right on time after a journey of 442 million miles.
More bioplastic materials have entered the 3D-printable filament fray. These PLA formulations reinforced with wood or bamboo fibers will debut at the October Composites Europe show in Germany.
Airbus Defence and Space has 3D printed titanium brackets for communications satellites. The redesigned, one-piece 3D-printed brackets have better thermal resistance than conventionally manufactured parts, can be produced faster, cost 20% less, and save about 1 kg of weight per satellite.
At IMTS last week, Stratasys introduced two new multi-materials PolyJet 3D printers, plus a new UV-resistant material for its FDM production 3D printers. They can be used in making jigs and fixtures, as well as prototypes and small runs of production parts.
GE Aviation not only plans to use 3D printing to mass-produce metal parts for its LEAP jet engine, but it's also developing a separate technology for 3D-printing metal parts used in its other engines.
Design News Webinar Series
9/25/2014 11:00 a.m. California / 2:00 p.m. New York
9/10/2014 11:00 a.m. California / 2:00 p.m. New York
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
7/17/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 20 - 24, How to Design & Build an Embedded Web Server: An Embedded TCP/IP Tutorial
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: October 1 - 30
Sponsored by Gates Corporation
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service