Liquid Robotics' new Wave Glider robot, the SV3 (right, in red) is bigger than its predecessor, SV2 (left, in yellow), shown during sea trials in Hawaii. The SV3 uses stored solar energy for part of its propulsion system, combined with the Wave Glider's unique, wave-powered energy harvesting system. (Source: Liquid Robotics)
Ann, this is a remarkable integration of a number of technologies -- solar, battery, energy storage, conversion of ocean movement. If you gather a number of technologies together no sngle technology has to be perfect. This is a good example.
It's nice to see the evolution of this useful and innovative robot as it uses alternative energy sources, Ann. I wrote about this technology awhile back and thought it always had a solar component, though? Is this just an extension of that? Or was I misled or mistaken?
Elizabeth, the Wave Glider you and I have both written about before did have solar, but it was not used for propulsion--instead, it powered the instruments in the payload, as the article states, and as is still the case. Now, some of that solar energy is also stored and used for propulsion.
Rob, thanks for that observation--I agree about the integration of technologies. That, plus using solar for propulsion, is why I wanted to share this with our readers. It's also why the robot won the Edison Award even before this latest innovation.
I would imagine the integration of emerging technology will become more common. There are so many new sustainable technologies that are getting proved, it's only natural that end products will begin to show up with a convergence of new technologies.
Ahan Ann , Thats really very great uptill now i have only heard about unmanned ground vehicle but this is the very first time i came to know about unmanned marine vehicle with soo many add on features included into it. These sort of marine robots are really very usefull as they help us to gather all the marine information in any type of climate cost effectively . With these sort of unmanned marine vehicles we can keep ourselves aware from earth quakes, tsunamis, and ocean storms etc without engaging any human life in it .
Yes Anandy You are correct these robots can be used by navy in their missions, Secondly they can be very important asset in getting soil ,underwater and earths crust information. With all these information one can take precautionary measures if god forbidds some natural disaster comes into notice
Debera, we've done a couple of slideshows that include unmanned underwater vehicles (UUVs), autonomous underwater vehicles (AUVs), and remotely operated vehicles (ROVs). Here are the links if you're interested in finding out more: http://www.designnews.com/author.asp?section_id=1386&doc_id=262528 http://www.designnews.com/author.asp?section_id=1386&doc_id=246206
Agreed, Rob. The interesting twist here is that the two sources -- solar and waves -- would seem to be complementary. Typically, the sea is at it's calmest under a clear sky and the waves are highest under overcast skies. If that's the case, one source provides power while the other is idle.
Rob and Chuck, this robot has successfully completed several different multi-thousand-mile voyages across the Pacific, and is used by the US government and private firms for long-term, unattended missions that last up to a year. It's built to handle just about anything, including collecting data during Hurricane Isaac: http://www.designnews.com/author.asp?section_id=1386&doc_id=250192
When I first heard of the Wave Glider, its propulsion system was what intrigued me the most. Thanks for posting that link, RHar. the company has put a bit more info online about how this works than when I first wrote about it last year. In any case, it struck me as one of those "why didn't someone else already think of it?" obvious-in-hindsight inventions.
Nice follow up story. It is interesting to see how they are evolving their design and use of solar energy.
One of the things I really like about your columns is that when relevant or useful, you reference past articles, bringing expanded insight to the current article or updating the information that the old one provided with new developments. And you provide links to make reading further easy.
When reading columns in Design News or on other sites, I often find that I remember previously reading a related article that has relevance to the current one, but don't have the time (or the organization) to go and find it on my own. You usually do that for us, and it is appreciated.
Clinton, thanks for the kind words. Putting these robot slideshows together is a lot of fun (as well as a lot of work). I also try to give some context to our readers, since, as a reader myself, I have the same frustrations when that's missing. Glad to hear this effort is useful.
Very informative. I had no idea this technology existed. I did look on their web site but did not see any information as to how the robot was guided. Do you know what steering mechanism is used to get from point"A" to point "B"? Excellent Post Ann.
Last week, the bill for reforming chemical regulation, the TSCA Modernization Act of 2015, passed the House. If it or a similar bill becomes law, the effects on cost and availability of adhesives and plastics incorporating these substances are not yet clear.
The latest crop of coating and sealant materials and devices has impressive credentials. Many are designed for tough environments with broad operating temperature ranges, and they often cure faster, require fewer process steps, and produce less waste.
A new program has been proposed for testing and certify 3D printing filaments for emissions safety. To engineers who've used 3D printers at home this is a no-brainer. It's from a consumer on Kickstarter, and targets use in homes and schools.
For the last 50 years, the Metal Powder Industries Federation (MPIF) has sponsored an awards competition for creative solutions to designing and fabricating near-net-shape parts using powder metal (PM) technologies. Here are the seven Grand Prize winners of the 2015 contest.
Graphene 3D Lab has added graphene to 3DP PLA filament to strengthen the material and add conductivity to prints made with it. The material can be used to 3D print conductive traces embedded in 3D-printed parts for electronics, as well as capacitive touch sensors.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.