Researchers in Malaysia have developed a bio-based composite material that improves strength and stiffness and reduces weight by substituting coconut fibers for traditional ceramic fibers in biocomposite tiles.
Thanks Ann for this intersting article highlighting these two studies.
Before the wonder fabric known as nylon came on the scene, there was a lot of development of fabrics made from natural sources such as milk fiber, hemp and even coconut. We're dusting off some of the old research. With more modern technology and processes, I think we'll see some very intersting results.
Nadine, thanks for the history--I didn't realize that this type of modern research, i.e., materials made from natural sources, had a previous phase. Maybe it's my studies in anthropology way back when, but I've always been interested in how people experiment with the natural materials in their immediate environment for an astounding range of uses.
Dr. Pradeep Rohatgi, who is best known for his work on metal-matrix composites, also did significant work on natural fiber composites, including coconut, banana, and sisal. This kind of technology could play an important role in reducing poverty in developing countries. Instead of relying on expensive materials imported from industrialized countries, indigenous materials could be used.
Besides, many biological materials have properties which rival those of the best synthetic materials, often at a significantly lower cost. A lot of money is being spent on research to develop multifunctional, nano-structured materials, but nature has a big head start on us (about four billion years).
I had heard about this use of coconut fibers recently, but not any details. Thanks for the article. Once again nature provides. I'd like to think that we're heading into an era where nature is viewed as a cooperative ally rather than something to be overcome. Efforts like this move us in the right direction.
@Scott Orlosky: You raise a good point -- our attitudes about natural products speak to our overall relationship with nature.
In the developed world, there is often a bias against the use of natural products in industry. For example, we often use wool grease (which, as the name indicates, is a mixture of long chain fatty acid esters extracted from the wool of sheep) as a lubricant for fasteners.
When I describe this product to people, they often react in disgust or derision -- even though some of them may regularly use skin care products containing lanolin, which is actually just highly-refined wool grease. But when it comes to industrial wool grease, they see it as a "gross" product, and have a hard time believing that it is still being used in the 21st century.
The same people tend not to have the same reaction to solid film lubricants or petroleum-based lubricants. (This is especially interesting when you consider how most urban people react when they drive past a sheep pasture, compared to an oil refinery).
On the other hand, in developing countries, indigenous materials are often considered to be inferior to synthetic materials imported from abroad. There is a common prejudice, especially among the educated classes, that imported products are always better than national products, and that traditional national products are little better than garbage (even though foreign tourists may pay large sums of money for traditional products, or at least facimilies thereof).
These attitudes are largely unconscious and mostly irrational, but I would argue that they play a significant role in material selection.
Excellent points. I hadn't considered the "general attitude" aspect of material selection. Sounds like it would take a significant re-education effort to undo those biases. The more we understand the natural origins of materials the more likely we are to respect and protect them.
Scott, your earlier comment "I'd like to think that we're heading into an era where nature is viewed as a cooperative ally rather than something to be overcome." is intriguing. I also hope we are recapturing an understanding that most humans once had for many thousands of years until recently in our history: seeing ourselves as an integral part of the natural world, one that we can look to for inspiration and resources.
Dave, thanks for that background on research into natural fiber composites. I agree on the local use of local materials to reduce costs. After all, that's what people did before the industrial revolution: use what's at hand.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
The 100-percent solar-powered Solar Impulse plane flies on a piloted, cross-country flight this summer over the US as a prelude to the longer, round-the-world flight by its successor aircraft planned for 2015.
GE Aviation expects to chop off about 25 percent of the total 3D printing time of metallic production components for its LEAP Turbofan engine, using in-process inspection. That's pretty amazing, considering how slow additive manufacturing (AM) build times usually are.
A $1,500, hand-operated, bench-model, plastic injection machine crowdsource-funded via Kickstarter can be used to mold small, quality, plastic parts inexpensively, on demand.
The federal government is launching competitions to kickstart three more manufacturing innovation institutes, including one focused on Lightweight and Modern Metals Manufacturing Innovation.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
