When I was a kid, we had a periscope you could make out of a cardboard tube and two small hand mirrors. We used it to peek above tables we were hiding under, or around corners, and spy on our friends or play varieties of hide and seek games. Now there's a video camera system that can do the same, and record what it sees with what amounts to very, very fast frame rates.
The video system, called Cornar, was created by researchers at the Massachusetts Institute of Technology's Media Lab, led by associate professor Ramesh Raskar. It can look beyond the line of sight, as well as peer around corners. Instead of using an angled mirror at each end of the periscope to reflect and redirect light, Cornar deploys ordinary surfaces that aren't usually considered to be reflective, like walls, doors, or floors.
Using a femtosecond laser, the Cornar video camera system bounces light off of walls and floors to "see" around corners and beyond the line of sight. (Source: MIT)
Conar is based on a femtosecond laser, which is wicked fast, and a picosecond detector. Bursts of light generated by the laser reflect off of multiple surfaces and reconstruct a 3D image.
The laser fires femtosecond bursts of light at a surface, for example, the wall opposite the doorway of a room. The light reflects off of that surface and into the room, where it bounces around, reflecting off of many more surfaces and acting as a flash. Eventually, the bursts re-emerge and strike a detector that takes measurements every few picoseconds. By sampling light at picosecond levels of accuracy, the researchers say they can reconstruct shapes with centimeter levels of accuracy. (You can watch a video demonstrating this process here.)
The system repeats this entire process multiple times, bouncing bursts of light off of several different spots on the wall, so groups of bursts enter the room at several different angles. The detector also measures the returning light at their different returning different angles.
Pretty cool technology. I could see something like this coming into play for first responders to disasters like the Chilean mine incident or even for fire fighters. I'm admittedly not that up to date on vision systems, but I am surprised that there isn't more technology out like this already.
Ann, The technology is very impressive and interesting. Will be interesting to see if there is enough commercial viability for the technology to become fully developed. Definitely a niche market.
This reminds me of the Lytro light-field camera. A clever detector arrangement collects lots of data and through the majic of software and image can be reconstructed that would not have been possible before.
New technology solves old problem with better resolution! Seeing beyond the electromagnetic horizon. Reminds me of over the horizon Radar popular during the Cold War era. Different wavelengths of electromagnetic spectrum but somewhat similar idea. Reflect off of the ionisphere and listen for back scatter to provide a target echo.
bdcst, thanks for the reference to over-the-horizon radar. I remember that technology, and yes, this does have a somewhat similar structure, only in a different wavelength band.
Yes, this reminded me of the Lytro camera as well. The Lytro camera allows setting of the range of focus with the picture data, through software, after the picture is taken. This concept allows reconstruction of laser topology reflected back into the scene. Also reminds me of the laser-based window listening devices, what will they think of next?
Another compelling example of physics and discovery coming out of the Media lab at MIT.As "apresher" mused about commercial viability, I'm not so sure this is a niche market, but I definitely agree that this technology is in its infancy and has great potential to grow into something fantastic.
For a period of time about 10 years ago, I had the exciting responsibility to visit and watch media lab presentations, then take ideas like this one back into Advance Development for product design at Motorola. I was tasked with conceiving viable applications for emerging technologies to be characterized into everyday devices that eventually flooded markets and became household familiarities. While that may sound like wishful thinking, I can truthfully report that some of the "New Ideas" that came from the Media Lab during that period 2001-2004 were E-Ink, Vision tracking, vehicle distance sensing, and audio beams; all of which have today landed into huge commercial applications and become parts of multi-million dollar industries.
So, while the photon-bounce assembled image of today's technology capability might seem like a blurry-blob only roughly recognizable,the breakthrough of re-assembling photon bounces into quazi recognizable image has been accomplished.Amazing! To me, this sounds like the pre-cursor to the Enterprise's 4-pad Transporter.Beam me up, Scotty!
I think there are several possible markets for this technology, and I'm not at all sure that they will all be niche markets, although no doubt some will be. Thanks, Jim, for your input, experience and enthusiasm. I didn't quite envision the Star Trek transponder when reading about this, but the possibilities for military/first responder and industrial/commercial applications seem pretty interesting and achievable.
Very interesting. If the "camera" measures time of flight of the photons, perhaps it relies on only one sensitive photodetector rather than an imaging array. Photodiodes can offer femtosecond response.
Will it be helpful in automobiles? like seeing the vehicles in the blind corners or avoiding the blind spots? MIT media lab is really doing great work ..
Laser scanning is used everywhere to define the real-world and convert it to 3D point cloud data that can be used in plant design, architectural remodeling, accident reconstruction, crime scene reconstruction, etc.
The way the technology works today, you have to set up the tripod in a few different places with targets that can be matched by the software to get a complete picture of the area. It works pretty good, but consider one setup, one scan and you're done. Amazing.
Do I understand correctly? The laser emits a light beam which scatters, then the camera 'averages' the returned photons to memorize what is there. When something new is added, the returning photons take a different time of flight and thus the shape and position of the 'new' thing is derived and displayed. Depending on the acquisition speed of the camera/computer, this would have a great usefullness in any number of internal/external building security, military field surveylance, etc.. A really neat concept.
bob from maine, the article gives links to two videos worth watching, one short and one more detailed, on how this technology works. Military surveillance and security are definitely some apps this could be used in, and probably lots more we haven't thought of yet that this will make possible.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
The 100-percent solar-powered Solar Impulse plane flies on a piloted, cross-country flight this summer over the US as a prelude to the longer, round-the-world flight by its successor aircraft planned for 2015.
GE Aviation expects to chop off about 25 percent of the total 3D printing time of metallic production components for its LEAP Turbofan engine, using in-process inspection. That's pretty amazing, considering how slow additive manufacturing (AM) build times usually are.
A $1,500, hand-operated, bench-model, plastic injection machine crowdsource-funded via Kickstarter can be used to mold small, quality, plastic parts inexpensively, on demand.
The federal government is launching competitions to kickstart three more manufacturing innovation institutes, including one focused on Lightweight and Modern Metals Manufacturing Innovation.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
