A titanium bone rasp for hollowing out femurs before inserting an implant can be custom-designed for a specific patient's bone using EOS' laser sintering additive manufacturing technology. (Source: Within Technologies)
Glad you enjoyed my report, Nadine. Actually there's been a lot of intelligent robot design here in the US, but much of it's been aimed at military or rescue robots. Some's also been done in industrial robots, but not with the specific goal of a robot like Baxter. I'm really interested to see what developers do with the SDK.
My husband just told me he showed this article to one of the guys at work, who said the bone rasp looks like a diamond studded borer used in industrial mining. I've been avoiding thinking about what this femur borer actually does, but--Ouch!
Didn't realize that 3D printing for medical applications are over 30 percent and trending upward. It makes sense because 3D printing is a great fit for creating individualized, custom parts out of titanitum at a reasonable cost and with a rapid turn-around time.
I can see a lot of applications where the Baxter robot can be used in assembly line application. The robot can handle the arduous task of picking and placing a part for the operator to complete some fine assembly work like fitting tight tolerance components together. The operator can then safely hand the part to another robot for assemnbly or packout.
Enjoyed your firsthand account of Baxter, Ann. Sounds like "he" behaves as the company said he would, but I guess the proof of his usefulness on the factory floor will be in the pudding. Generally he sounds quite impressive, though!
Yes, the photo of the femur bone rasp is seriously daunting! Looks more like a weapon for a scifi superhero than a doctor...hopefully patients are under heavy anesthesia before something like this is used on them. The innovations in fabrication of the tool are quite impressive, though.
Hi Ann--Baxter has gotten a lot of attention since it was rolled out. I wonder about the ultimate safety in a real environment. To do its job it has to learn some places or zones where it expects "parts" and everywhere else would be an exception so the sensors can stop it. If your body is where a part should be, how does it know the difference?
I can imagine a learning process where the entire profile of motion, including all 3D forces and accelerations are recorded and stored, and some threshold set to that if during the entire operation a threshold is exceeded it stops. I don't know if that is more or less what they are doing. Even if that is true, a human has to set the thresholds in the learned profile, and production engineers being human, will tend to set the thresholds to eliminate any false alarms. That opens the door to injury.
Do you have any deeper insight into how Baxter will always know the difference between work and a human?
Greg, I knew medical and dental was a major app area but not that it had reached such a high percentage. I agree, it makes total sense. The reduction in cost per item of a titanium device is what amazed me the most.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
Engineers at the University of California, San Diego are designing a robotic arm that takes inspiration from the loose, flexible, yet very strong structure of the armored plates on a seahorse's tail.
Researchers at the Missouri University of Science & Technology have designed a new nanoscale material that can transmit light faster than the 186,000 miles per second it usually takes to travel through air.
It has often been said that as California goes, so goes the nation. This spring, the state's wind power is setting energy generation records and solar energy generation is expected to rise sharply during the second half of 2013.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
4 
