Alcoa's Keensert inserts and studs, shown here, along with Inconel 718 bolts and standard hexagon nuts, went to Mars on the Curiosity Rover. In spacecraft and aircraft, Keenserts provide high resistance to torque-out and pullout loads.
That's true of course. The question is, given an increase in composite use, whether fasteners will be used in high enough quantities in repair to make up for the lower overall quantities in manufacturing.
Excellent post Ann. I know the longevity of any fastener is dependent upon the application and use. Relative to composite fasteners, do we know how they "stack up" relative to metal fasteners? I have seen no data that tries to correlate life cycles of either type. Great point also about the grounding of composites. I know this must be a huge issue but not talked about too much in the literature.
Glad you liked the article. The whole issue of the grounding of composites used in aircraft has been widely misunderstood, so I thought it was a good idea to include some clear discussion on that issue. Could you clarify your question about comparisons between fasteners for composites and fasteners for metal? What sort of comparisons do you have in mind?
I never thought that lightening strikes on aircraft was so common. I read that it happens 2 times per year on average, per airplane. I have seen electrical discharge responsible for fastener loosening and in some cases, ejecting.
There is a downside to composite pieces, price. Bolting parts together will always be around. I designed a mechanical system that ended up having over 60 bolts.. it was cheaper than with none, that was for sure.
The lightning strike issue isn't about frequency so much as it is about catastrophic results. If you've only got a (for example) 1% chance of something happening, but that something has catastrophic results--people dying, lawsuits--then that's something you've got to protect against, or at least not encourage, in your materials and assembly process selection.
A self-propelled robot developed by a team of researchers headed by MIT promises to detect leaks quickly and accurately in gas pipelines, eliminating the likelihood of dangerous explosions. The robot may also be useful in water and petroleum pipe leak detection.
Aerojet Rocketdyne has built and successfully hot-fire tested an entire 3D-printed rocket engine. In other news, NASA's 3D-printed rocket engine injectors survived tests generating a record 20,000 pounds of thrust. Some performed equally well or better than welded parts.
Researchers at MIT's d'Arbeloff Laboratory are developing shoulder- and hip-mounted robotic arms to help workers in aircraft manufacturing perform difficult or complex assembly tasks that would normally require two people.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.